EN (2-27)
FR (28-53)
ES (54-79)
SYMBOL EXPLANATION
Symbols
This product is in accordance
with applicable EC directives.
WARNING: Clearing saws, brush-
cutters and trimmers can be dan-
gerous! Careless or incorrect use
can result in serious or fatal
Noise emission to the
environment according to the
European Community’s
Directive. The machine’s
emission is specified in the
Technical data section and
on label.
injury to the operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions
before using the machine.
Sound pressure level at
7,5 metres.
Always wear:
S A protective helmet where there
is a risk of falling objects
S Hearing protection
S Approved eye protection
Max. speed of output shaft, rpm
Use unleaded or quality leaded
petrol and two--stroke oil
mixed at a ratio of 2% (1:50).
Beware of thrown objects and
ricochets.
Other symbols/decals on the machine
refer to special certification requirements
for certain markets.
The operator of the machine
shall ensure, while working,
that no persons or animals
come closer than 15 metres.
Stop the engine by pushing
and holding the stop switch
in the STOP position. CAUTION!
The stop switch automatically
returns to the start position.
In order to prevent unintentional
starting, the spark plug cap must be
removed from the spark plug when
assembling, checking and/or
performing maintenance.
Machines fitted with grass blades
can be thrown violently to the side
when the blade comes into contac
with a fixed object. The blade is
capable of amputating an arm or
leg. Always keep people and
animals at least 15 metres from
the machine.
Arrows which show limits for
handle mounting.
Regular cleaning is required.
Visual check.
Always wear approved protective
gloves.
Approved eye protection must
always be used.
Use anti--slip and stable boots.
Only use non--metallic, flexible
cutting attachments, i.e. trimmer
heads with trimmer line.
English---2
545196786 Rev. 2 4/30/09
CONTENTS
Contents
Note the following before
KEY TO SYMBOLS
starting:
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 2
CONTENTS
Please read the operator’s manual carefully.
WARNING: Under no circum-
stances may the design of the
machine be modified without the
permission of the manufacturer.
Always use genuine accessories.
Non -authorized modifications
and/or accessories can result
in serious personal injury or the
death of the operator or others.
Contents . . . . . . . . . . . . . . . . . . . . . . . . 3
Note the following before starting . . . . 3
WHAT IS WHAT?
What is what? . . . . . . . . . . . . . . . . . . . 4
GENERAL SAFETY PRECAUTIONS
Important . . . . . . . . . . . . . . . . . . . . . . . . 5
Personal protective equipment . . . . . . 5
Machine’s safety equipment . . . . . . . . 6
Cutting equipment . . . . . . . . . . . . . . . . . 8
ASSEMBLY
WARNING: A clearing saw,
brushcutter or trimmer can be
dangerous if used incorrectly or
carelessly, and can cause serious
or fatal injury to the operator or
others. It is extremely important
that you read and understand the
contents of this operator’s manual.
Fitting the handlebar . . . . . . . . . . . . . . . 10
Fitting the harness and harness clamp 10
Fitting blades and trimmer heads . . . . 11
Fitting a blade guard, grass blade and
grass cutter . . . . . . . . . . . . . . . . . . . . . . 11
Fitting the trimmer guard and
trimmer head . . . . . . . . . . . . . . . . . . . . . 12
FUEL HANDLING
Fuel safety . . . . . . . . . . . . . . . . . . . . . . . 13
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Fuelling . . . . . . . . . . . . . . . . . . . . . . . . . 14
STARTING AND STOPPING
Check before starting . . . . . . . . . . . . . . 15
Starting and stopping . . . . . . . . . . . . . . 15
WORKING TECHNIQUES
WARNING: Long -term exposure
to noise can result in permanent
hearing impairment. So always use
approved hearing protection.
Husqvarna AB has a policy of continuous
product development and therefore
reserves the right to modify the design and
appearance of products without prior
notice.
General working instructions . . . . . . . . 17
MAINTENANCE
Carburetor . . . . . . . . . . . . . . . . . . . . . . . 20
Muffler . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Spark plug . . . . . . . . . . . . . . . . . . . . . . . 21
Air filter . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Bevel gear . . . . . . . . . . . . . . . . . . . . . . . 21
Sharpening grass cutters and grass
blades . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Maintenance schedule . . . . . . . . . . . . . 23
TECHNICAL DATA
Technical data . . . . . . . . . . . . . . . . . . . . 24
EC--declaration of conformity
(Applies to Europe only) . . . . . . . . . . . . 25
English---3
545196786 Rev. 2 4/30/09
|