REMOTE CONTROLLER
OWNER’S MANUAL
B-SMA/SMH09/12/18SC
Single Zone Mini-Splits
B-VMH09/12/18/24/30/36SC-1
Single Zone Inverter Mini-Splits
B-VMH09/12/18FC-1
Multi-Flex Inverter Mini-Splits
Heat Controller, Inc. • 1900 Wellworth Ave. • Jackson, MI 49203 • (517)787-2100 • www.heatcontroller.com
Heat Controller, Inc.
Remote ContRolleR
Owner’s Manual
Using the Remote Controller
Use the remote controller within a distance of 26' 3"
(8 meters) from the appliance, pointing it towards the
receiver. Reception is confirmed by a beep.
receiver
housing
Remove the battery cover by pressing and sliding it off.
2
Owner’s Manual
Remote ContRolleR
Heat Controller, Inc.
an extended period of time.
Remote Controller Specifications
R51l5BG(C)E, R51l6/BG(C)E,
R51l7/BG(C)E, R51l8/BG(C)E, R51l9/BG(C)E;
R51l10/BG(C)E, R51l11/BG(C)E, R51l12/BG(C)E;
Model*
Rated Voltage
3.0V (Dry batteries R03/LR03x2 or (2) AAA)
Lowest Voltage of CPU Emitting Signal
Signal Receiving Range
Environment
2.0V
26'3" (8m)
-41°F~140°F (-5°C~60°C)
*NOTE:
Temperature setting display:
Fahrenheit scale (°F): R51l9/BG(C)E; R51l10/BG(C)E, R51l11/BG(C)E, R51l12/BG(C)E
Celsius scale (°C): R51l5BG(C)E, R51l6/BG(C)E, R51l7/BG(C)E, R51l8/BG(C)E
Performance Feature
Indoor setting temperature range: 62°F~88°F (17°C~30°C)
Full function of LCD Display (Liquid Crystal Display)
3
Heat Controller, Inc.
Remote ContRolleR
Owner’s Manual
Function Buttons
AUTO
COOL
DRY
HEAT*
FAN
*NOTE: Heat pump models only
ION and FOLLOW buttons
are optional functions.
4
Owner’s Manual
Remote ContRolleR
Heat Controller, Inc.
Function Buttons (continued)
ECONOMY Button (Sleep Mode)
to maintain the most comfortable temperature
TIMER OFF Button
ION and FOLLOW buttons
are optional functions.
Press this recessed button to lock all current set-
tings. Use the LOCK mode when you want to
prevent settings from being changed accidentally.
Press the LOCK button again to cancel the LOCK
function. A key symbol will appear on the remote
controller display when the lock function is activated.
5
Heat Controller, Inc.
Remote ContRolleR
Owner’s Manual
Indicators on LCD Display
The temperature setting (from 62°F (17°C)
to 88°F (30°C)) or timer setting (0~24h)
will be displayed. If FAN mode is selected,
there will be no display.
A key symbol is displayed when pushing
the LOCK button. Push the LOCK button
to clear display.
6
Owner’s Manual
REMOTE CONTROLLER
Heat Controller, Inc.
How to use the buttons
Auto operation
Ensure power is available to the unit. The OPERATION
indicator on the display panel of the indoor unit illumi-
nates.
1. Press the MODE button to select Auto.
2. Press the TEMP button to set the desired tempera-
ture. The temperature can be set within a range of
62°F (17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the ON/OFF button to start the air conditioner.
2
1
3
NOTE
1. In the Auto mode, the air conditioner can logically choose the
mode of Cooling, Fan, Heating and Dehumidifying by sens-
ing the difference between the actual ambient room temper-
ature and the set temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed. It is
automatically controlled in this mode.
3. If the Auto mode is not comfortable for you, the desired
mode can be selected manually.
Cooling/Heating/Fan Operation
Ensure power is available to the unit.
1. Press the MODE button to select COOL, HEAT (cool-
ing & heating models only), or FAN mode.
2. Press the TEMP button to set the desired tempera-
ture. The temperature can be set with a rnage of 62°F
(17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the FAN SPEED button to select the fan speed
in four steps–Auto, Low, Med or High.
2
1
4
4. Press the ON/OFF button to start the air conditioner.
3
NOTE
In the FAN mode, the setting temperature is not displayed
in the remote controller. In fan only mode, the fan creates a
breeze without cooling or heating the room. To cool or heat
the room, cooling or heating modes need to be selected
rather than fan only.
7
Heat Controller, Inc.
REMOTE CONTROLLER
Owner’s Manual
Dehumidifying operation
Ensure power is available to the unit. The OPERATION
indicator on the display panel of the indoor unit illumi-
nates.
1. Press the MODE button to select DRY mode.
2. Press the TEMP button to set the desired tempera-
ture. The temperature can be set within a range of
62°F (17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the ON/OFF button to start the air conditioner.
NOTE
2
1
3
In the Dehumidifying mode, you can not switch the fan
speed as it is being automatically controlled.
Swing operation
direction.
direction setting feature of the louver is activated. The
angle of the louver changes by 6° each time the but-
ton is pressed. Keep pressing the button to move the
louver to the desired position.
2. By pressing the SWING button without releasing it for
2 seconds, the auto swing feature of the louver acti-
vates. The horizontal louver swings up/down automati-
cally. Press it again to stop.
1
NOTE
When the louver moves to a position which would affect the
cooling and heating effect of the air conditioner, it will auto-
matically change the swing/louver direction.
8
Owner’s Manual
Remote ContRolleR
Heat Controller, Inc.
Pressing the TIMER ON button can set the auto-on
time of the unit. And pressing the TIMER OFF button
can set the auto-off time of the unit.
symbol
.
SEE NOTE.
symbol
SEE NOTE ON NEXT PAGE.
symbol
9
Heat Controller, Inc.
Remote ContRolleR
Owner’s Manual
10
Owner’s Manual
Remote ContRolleR
Heat Controller, Inc.
symbol “h” will
11
Heat Controller, Inc.
REMOTE CONTROLLER
Owner’s Manual
ECONOMY (SLEEP MODE) operation
When you press the ECONOMY button, the econ-
omy/sleep mode running function will be activated,
the set temperature will increase (in cooling) or
decrease (in heating mode) by 2°F (1°C) over the
next 30 minutes and by another 2°F (1°C) after an
additional 30 minutes. This new temperature will
be maintained for 7 hours before it returns to the
originally selected temperature. (NOTE: On some
models, the set temperature will increase (cooling)
or decrease (heating) by 2°F (1°C) per hour for 2
hours. This new temperature will be maintained for 5
hours, then the unit turns off.)
NOTE: The ECONOMY/SLEEP function is only
available under Cooling, Heating and Auto
operation.
12
10/2012
|