Grizzly Switch G4671 User Manual

Model G4671  
Magnetic Switch Instruction Sheet  
 
 
 
 
 
 
��  
 
��  
 
Electrocution or fire could occur if this switch is  
not installed by a qualified electrician!  
 
�  
�  
MAGNETIC  
SWITCH  
 
ASSEMBLY  
 
 
 
 
 
 
Contactor  
TECO  
CN-16  
 
 
 
 
 
�  
(220V Coil)  
�  
�  
 
�  
 
 
Thermal  
Overload Relay  
TECO  
�  
 
��  
 
 
�  
�  
RHN-10K  
(2.4-3.6A)  
�  
�  
�  
 
IMPORTANT: This magnetic switch toggles a motor ON and OFF, and helps  
provide thermal overload protection for the motor if operating temperature  
gradually increases due to heavy work loads. The thermal overload relay inside  
is not designed to cut power in the event of a sudden motor overload or stall.  
�  
�����  
To help protect a motor from this type of overload, this magnetic switch MUST be connected to a properly sized  
power supply circuit with a correct fuse or circuit breaker.  
OPERATION: The green push button switch allows current to go to the magnetic coil which pulls the contactor  
closed. Main current now passes through the thermal overload relay and then to the motor. This relay monitors  
motor current draw. If the motor begins to overheat, this relay breaks the magnetic field, which opens the  
contactor and cuts current to the motor. The red push button breaks the magnetic field, which opens the  
contactor and disconnects the current to the motor.  
 

Graco Baby Gym 9261 User Manual
Graco Baby Swing 1757214 User Manual
Greenheck Fan Automobile Electronics MS4209F User Manual
HANNspree Flat Panel Television HANNSzzebra User Manual
Hasbro Board Games 98048 Asst User Manual
Honeywell Marine Radio E EQ MX3PLUSOGWW User Manual
Honeywell Tablet SL62 User Manual
Hypertec Mouse HKB260CBSEU User Manual
Hypertec Mouse Wireless Keyboard with Optical Trackball User Manual
Ice O Matic Ice Maker ICE0806A3 W3 R4 User Manual