Universal Remote Control Universal Remote UR5U 9000L User Manual

th  
If your remote model has custom-program-  
mable Macro buttons available, they can be  
programmed to act as a 'Macro' or Favorite  
Channel button in CABLE mode. This allows  
you to program up to five 2-digit channels,  
four 3-digit channels or three 4-digit channels  
that can be accessed with one button press.  
TV  
A. Quick Set-Up Method  
C. Auto-Search Method  
E. AUX Function: Programming a 5  
Component  
G. Programming Channel Control  
6
7
Introduction  
Button Functions  
Quick Set-up Code Tables  
Set-up Code Tables  
CBL-CABLE Converters  
1
4
Operating Instructions For  
Manufacturer/Brand  
Set-Up Code Number  
STEP1 Turn on the device you want to program-  
STEP1 Turn on the Component you want to  
You can program the channel controls  
(Channel Up, Channel Down, Last and  
Numbers) from one Component to operate  
in another Component mode. Default chan-  
nel control settings on the remote control  
are as follows:  
TV  
to program your TV, turn the TV on.  
BRADFORD  
BROCKWOOD  
BROKSONIC  
BYDESIGN  
CANDLE  
CAPEHART  
CARY AUDIO DESIGN 266  
CELEBRITY  
CENTURION  
CETRONIC  
CHANGHONG  
CITIZEN  
CLARION  
CLASSIC  
CLP CLASSIC  
COLORTYME  
CONCERTO  
CONCIERGE  
CONTEC  
CORNEA  
CORONADO  
CRAIG  
043  
116  
238  
The PHAZR-5 UR5U-9000L & UR5U-9020L  
is designed to operate the CISCO / SA,  
Pioneer, Pace Micro, Samsung and  
Motorola digital set tops, Plus the majority  
of TV, AUD, DVD and AUX equipment on  
the market as shown below.  
program (TV, AUD, DVD or AUX).  
You can take advantage of the AUX func-  
th  
Quick Number  
Manufacturer/Brand  
FUJITSU  
SONY  
SAMSUNG  
LG  
TOSHIBA  
PANASONIC  
PHILIPS  
HITACHI  
SHARP  
STEP2 Point the remote at the TV and press  
and hold TV key for 3 seconds. While  
Holding the TV key, the TV LED will light  
off and on again. Begin to press the  
number keys, one at a time, starting  
with 1, then 2, 3...0 until the TV turns off.  
STEP3 Release the TV key to save the code.  
The TV LED will blink twice to con-  
firm the code is stored.  
tion to program a 5 Component such as a  
Manufacturer/Brand  
Set-Up Code Number  
STEP2 Press the [COMPONENT] button (TV,  
AUD, DVD or AUX) to be programmed  
and [OK/SEL] button simultaneously  
for 3 seconds. The Component LED  
light will turn on for 30 seconds indi-  
cating the unit is ready to be pro-  
grammed.  
second TV, AUD, DVD or Audio Component.  
0
1
2
3
4
5
6
7
8
9
PHAZR-5  
CISCO / SA  
PIONEER  
PACE  
SAMSUNG  
MOTOROLA  
DIGEO  
001 003 041 042 045 046  
001 103 034 051 063 076 105  
001 005 002  
001 030  
002 111 148  
031 032  
116 002 003 363  
058  
th  
STEP1 Turn on the 5 Component you want  
to program (TV, AUD, DVD or Audio).  
Cable Remote Control  
STEP1 Press the [CBL] button to select the  
STEP2 Press the [AUX] button and the  
[OK/SEL] button simultaneously for  
3 seconds.The [AUX] Component  
LED will turn on for 30 seconds.  
STEP3 Press the [COMPONENT] button  
you want to setup. Point the remote  
control toward the Component and  
enter the 3-digit code number  
assigned to your brand.  
CBL : CBL T V : CBL AUD : AUD  
DVD : DVD AUX : AUX  
CBL mode.  
001  
116  
043  
247  
CABLE : Cable Converters  
TV : Televisions  
153  
AUD : Audio Receivers  
DVD : DVD Players  
STEP2 Press the [MACRO] button and  
[OK/SEL] button simultaneously for 3  
seconds. The [CBL] button will turn  
on for 30 seconds.  
GENERAL INSTRUMENT 005 103 104  
UR5U-9000L & UR5U-9020L  
If you wish to store the TV channel control  
in TV mode, use the following steps.  
STEP1 Press the [TV] button and the  
[OK/SEL] button simultaneously for  
3 seconds. The [TV] Component  
LED will turn on for 30 seconds.  
AUX : Media PC, Gaming System, etc.  
HAMLIN  
HITACHI  
JERROLD  
MAGNAVOX  
MEMOREX  
MOXI  
NFUSION  
PANASONIC  
PHILIPS  
PULSAR  
RCA  
REGAL  
REGENCY  
SKY  
SONY  
SPRUCER  
TELNET  
049 050 055  
103 055  
005 004 103 005 003 008 009 010 069  
010 012  
052  
111 252 153  
192  
044 047  
006 012 013 020 085  
052  
047  
049 050  
057  
230 204  
108  
047  
354  
039 040 056  
052  
STEP3 Point the remote toward the  
Component and press the [CH] or  
[CH] button one step at a time or  
keep it pressed. The remote will emit  
a series of ON/OFF commands.  
Release the [CH] or [CH] button  
as soon as the Component turns Off.  
Repeat these steps for your AUD, DVD,  
AUX, etc.  
116 002 003 363 043 258 103 143  
Replacing Batteries  
Before you program or operate the remote control,  
you must install two new AA alkaline batteries.  
2
043  
043  
333  
116  
363  
073  
PHILIPS  
STEP3 Enter the the 2, 3 or 4-digit code for  
the channel you want programmed  
first (for example, 007) using the  
Number Pad, then press the [STOP]  
button. Then enter the code for the  
next channel (for example, 050), then  
press the [STOP] button. Repeat this  
process for the third channel. The  
[CBL] button will blink once for each  
channel entered.  
B. Pre-Programmed 3-Digit Code Method  
STEP1 Turn on the Component you want to  
AUDIO  
Quick Number  
program (TV, AUD, DVD or AUX).  
STEP1 Remove the battery compartment cover  
STEP2 Press the [VOL ] button.  
*Note : If the 3-digit code number you just  
entered is the correct number, the  
Component will turn Off. If it did  
not turn Off, continue entering  
code numbers listed for that brand  
until the Component turns Off.  
Manufacturer/Brand  
ROTEL  
DENON  
YAMAHA  
MARANTZ  
SONY  
INTEGRA  
HARMAN KARDON  
PIONEER  
ONKYO  
on the back of your remote control.  
STEP2 Press the [COMPONENT] button (TV,  
AUD, DVD or AUX) to be pro-  
grammed and [OK/SEL] button simul-  
taneously for 3 seconds. The  
Component LED light will turn on for  
30 seconds indicating the unit is  
ready to be programmed.  
STEP3 Point the remote control toward the  
Component and enter the 3-digit  
code number assigned to your brand.  
STEP4 Test functions. (Same as for 3-Digit  
Code Programming Method -  
Section B). If any of the functions do  
not work as they should, repeat from  
STEP 3 using [CH] or [CH] but-  
tons to find the correct code.  
043 050 051  
116  
STEP3 Press the [TV] button again.  
The Component LED will blink  
twice to confirm the programming.  
0
1
2
3
4
5
6
7
8
9
STEP2 Check battery polarity carefully, and  
install the batteries as shown in the  
illustration below.  
143  
043 054  
164  
043 143  
CROSLEY  
CROWN  
To return to original state:  
STEP3 Replace the battery compartment cover.  
STEP4 Test functions. (Same as for 3-  
Digit Code Programming Method -  
Section B). If any of the functions  
do not work as they should, you  
need to find a new code.  
STEP5 Once you have found the correct  
3-digit code, save it by pressing the  
[AUX] button one more time. The  
Component LED light will blink  
twice to confirm the code was  
stored. Now when you press the  
AUX button, all the buttons will  
If you wish to restore the CABLE channel  
control in TV mode, repeat the above steps  
CURTIS MATHES 116 258 363 143  
CXC  
CYBERHOME  
DAEWOO  
STEP4 Press the [CH] button to store the  
channels that were selected. The  
[CBL] button will blink twice to con-  
firm the storage of commands.  
STEP5 Save the code. (Same as for 3-  
Digit Code Programming Method  
- Section B).  
043  
015  
TOCOM  
but press [CBL] in STEP3  
.
363 016 043 044 076 103 114 125 127  
TOSHIBA  
VIEWSTAR  
ZENITH  
143  
H. Programming Volume Control  
012 015  
052 060 093 100  
LEXICON  
Now, repeat the Auto-Search Method for  
those Components you could not program  
earlier with the Pre-Programmed Method.  
DAYTRON  
DELL  
DIGITAL PROJECTION 570  
DIMENSIA  
DREAMVISION  
DUKANE  
DUMONT  
DURABRAND  
DWIN  
DYNASTY  
DYNEX  
EIKI  
ELECTROBAND  
ELECTROGRAPH 466  
363 143  
320 164 363  
*Note : If the 3-digit code number you just  
entered is correct, the Component will  
turn Off. If it did not turn Off, continue  
entering code numbers listed for that  
brand until the Component turns Off.  
Volume and Mute control are factory-pro-  
grammed to automatically transfer to the  
respective Component mode you select, as  
follows:  
To access the programmed channels, press  
the [MACRO] button once. This will bring up  
the first channel. Press once again and it will  
bring up the second channel. Press again and  
it will bring up the third channel.  
TV  
DVD  
Quick Number  
333  
235  
Manufacturer/Brand  
Set-Up Code Number  
112 143  
025  
036  
072 251 333  
247 388  
002  
103  
D. Finding a Component Button’s  
Setup Code Number  
If you used the Auto-Search Method to pro-  
gram a Component, you may not know  
what the correct code number is. Here is a  
way for you to identify the code number, so  
you can record it for future reference.  
STEP1 Press the [COMPONENT] button  
(TV, AUD, DVD or AUX) you want  
to verify and the [OK/SEL] button  
simultaneously for 3 seconds. The  
Component LED light will turn on  
for 30 seconds.  
STEP2 Press the [INFO] button and count  
the number of times the Component  
LED light blinks. This number indi-  
cates the first digit of the code, fol-  
lowed by the second and third,  
each separated by a one second  
pause when the LED will turn off.  
Manufacturer/Brand  
HITACHI  
SONY  
011 025  
116 073  
096 052  
257  
A MARK  
ABEX  
ACCURIAN  
ADMIRAL  
ADVENT  
ADVENTURA  
AIKO  
0
1
2
3
4
5
6
7
8
9
STEP4 After you’ve entered the correct code  
number and the Component has  
turned Off, press the [POWER] button  
to turn the Component back On. Now  
it is time to test the VOLUME and  
MUTE buttons for the TV (or PLAY and  
STOP buttons for DVD) to make sure  
they all work. If any of the functions do  
not work as they should, repeat from  
STEP 3 using the next 3-digit code  
number listed for that brand until you  
find the best Component code.  
STEP5 Once you have found the correct 3-  
digit code, save it by pressing the  
same [COMPONENT] button one  
more time. The Component LED light  
will blink twice to confirm that the  
code was successfully stored.  
CBL :CBL T V : TV  
DVD :TV AUX : AUX  
AUD : AUD  
th  
J. Low Battery Warning  
work with that 5 Component.  
PHILIPS  
However, you can program the volume  
controls (Volume Up, Volume Down and  
Mute) from one Component to operate in  
another Component.  
SAMSUNG  
PHILIPS MAGNAVOX  
PANASONIC  
LG  
JVC  
DENON  
043  
400  
187  
001  
When the batteries are low and need to be  
replaced with fresh batteries, the Component  
LED lights will blink 2 times in sequence  
whenever a [POWER] button is pressed to  
turn on equipment.  
F. Programming the System On/Off Button  
This allows you to program the System  
On/Off button so it can send up to five power  
On/Off commands with one button press.  
AKAI  
116 146 248 404 405 473 475 323 387  
391  
017  
028  
If you wish to store the TV volume control in  
CBL mode, use the following steps.  
STEP1 Press the [CBL] button and the  
[OK/SEL] button simultaneously for  
3 seconds. The [CBL] Component  
LED will turn on for 30 seconds.  
Operations  
3
ELECTROHOME  
ELEKTRA  
ELEMENT  
143 024 076 196  
ALBATRON  
ALERON  
AMERICA ACTION 043  
AMPRO  
AMSTRAD  
ANAM  
Programming the Remote Control  
5
STEP1 Press the [CBL] button.  
072  
K. Memory Lock System  
This remote control is designed to retain pro-  
grammed memory for 10 years even after bat-  
teries are removed from the remote control.  
PIONEER  
DEFAULT STATE:  
363 494 526  
028 048 043 155 005 116 363 047 050  
051 076 096 143 153 154 052 514  
There are three ways you can program your remote:  
STEP2 Press the [SYSTEM ON/OFF] but-  
ton and the [OK/SEL] button simul-  
taneously for 3 seconds. The [CBL]  
button will turn on for 30 seconds.  
STEP3 Press the first [COMPONENT] button  
you want to store in the [SYSTEM  
ON/OFF] button and then the  
[POWER] button. Repeat this for other  
Components until you have stored all  
the desired power commands into  
the [SYSTEM ON/OFF] button.  
Component Default: CABLE Set Top Box (STB)  
Channel Default: CABLE channel and numbers  
through the CABLE STB. You have the option of  
controlling your CABLE channel and numbers  
through the TV or AUD. Refer to section G for pro-  
gramming steps.  
EMERSON  
073  
052  
Quick Set-Up Method  
*
The Pre-Programmed 3-Digit Code Method  
*
AUX  
Quick Number  
ENVISION  
EPSON  
ESA  
FISHER  
FUJITSU  
FUNAI  
FUTURETECH  
GATEWAY  
GE  
116  
043 054 056 080 112  
116 363 112 058  
572  
006  
573 574  
477  
076 454 388  
052  
441  
039  
The Auto-Search Method  
*
324 590  
AOC  
APEX  
Manufacturer/Brand  
323  
The Quick Set-Up Method is a unique new feature that enables the fastest and easiest set-up by  
using one-digit codes for up to 10 major brands for each component.  
STEP2 Press the [VOL ] button.  
0
1
2
3
4
5
6
7
8
9
BOSE  
HP  
L. Record Your Component Set-up  
Codes  
007 057  
246 198 410  
028 043 052  
APEX DIGITAL  
AQUAVISION  
ASTAR  
AUDIOVOX  
AVENTURA  
AVION  
AXION  
BELCOR  
BELL&HOWELL  
BENQ  
BOXLIGHT  
STEP3 Press the [TV] button. The Component  
LED will blink twice to confirm the pro-  
gramming.  
To return to original state:  
If you wish to restore the CBL volume con-  
trol in CBL mode, repeat the above steps  
The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit code num-  
bers that correspond to a particular Component’s manufacturer/brand, so it’s the fastest and easiest of the two  
methods. (Code Tables are on the backside of this Instruction Sheet.) The Auto-Search Method scans through  
all the codes in the remote control, one at a time.  
Volume Default: Volume and Mute control are  
automatically transferred to the respective  
Component mode you select, as follows: CBL:  
Cable Set Top Box / TV: TV / AUD:AUD. Volume  
and Mute control for DVD are automatically  
transferred to the TV. However, you have the  
option of controlling CABLE Volume and Mute  
through the TV, DVD or AUD. Refer to section H  
for programming steps.  
APPLE / iPod  
APPLE / iPod  
MICROSOFT / XBOX  
SONY / PS2  
LUTRON  
TV  
Set-up Code Number:  
043  
Now, program the rest of your Components  
by repeating STEPS 1-5.  
242 268  
AUD Set-up Code Number:  
DVD Set-up Code Number:  
AUX Set-up Code Number:  
073 116 008 009 034 056 074 155 333  
*Note : If the Pre-Programmed Method did  
not work, or if the Code Tables do  
not list your Component brand, use  
the Auto-Search Method as explained  
in Section C.  
363  
391  
*Note : 10 blinks represents the number zero.  
IMPORTANT SETUP NOTE!  
STEP4 Press the [CH] button to save the  
power commands you stored. The  
[CBL] button will blink twice to con-  
firm the commands have been saved.  
GEM  
116  
333 072  
423  
Universal Remote Control, Inc.  
X-10  
X-10  
Example : One blink, (pause), eight blinks,  
(pause) and three blinks, indi-  
cates code number 183.  
This pertains to all programming steps. When you are in setup mode, a component LED will light for 30 sec-  
onds.If you do not press a button within 30 seconds, the LED light will turn off and exit setup mode and you will  
need to start over.  
GIBRALTER  
GO VIDEO  
GOLDSTAR  
116 073  
but press [CBL] in STEP3  
.
For additional information about your remote  
026  
OCE-0081A Rev 01 (12/09/09)  
I. Programming a ‘Macro’ button.  
MICROSOFT / XBOX  
266  
113 116 102 363 106 112 127 143  
 

Taylor Thermometer 5535E User Manual
Texas Instruments Network Card TLV320AIC3107EVM K User Manual
The Singing Machine CD Player STVG 520 User Manual
Tripp Lite TV Cables N201 010 RD User Manual
Tunturi Treadmill J4F User Manual
ViewSonic Computer Monitor VX1932wm LED User Manual
Viking Ventilation Hood DEV1200 User Manual
Vinotemp Refrigerator VT 28TEDS User Manual
VTech Cordless Telephone CL80100 User Manual
Weber Water Heater 98583 User Manual