Uniden Telephone DECT1820 User Manual

DECT1820  
EXTRA HANDSET  
OWNER'S  
MANUAL  
OWNER'S MANUAL  
 
Installing Your Expansion Handset  
Follow these three easy steps to get your new handset ready to  
use:  
1 Connect the charger.  
2 Install the batteries and charge your new handset for 15-20  
hours.  
3 Register your new handset to the main base.  
Step 1:Connect the Charger  
1
Connect the AC adapter to the DC IN  
jack and to a standard 240V AC wall  
outlet.  
2
Set the charger on a desk or tabletop.  
Use only the supplied AC  
adapter. Do not use other  
AC adapter.  
• Place the charger close to the AC outlet so that you can  
unplug the AC adapter easily.  
[2]  
 
Step 2:Install the Batteries and charge your new  
handset for 15-20 hours  
1 Remove the battery compartment cover. Press down on the  
semi-circle indent and slide the cover off.  
2 Charge the battery for 15-20 hours before using. To charge the  
batteries, place the handset on the charger.  
While charging, the symbol scrolls and when the battery is fully  
charged, all the bars of the battery symbol will be filled when the  
phone is off the cradle.  
If the symbol does not appear, reposition the handset in the  
charger, ensuring that the charging points contact.  
•Use only the Uniden batteries supplied with your phone.  
•Recharge your handset on a regular basis by returning  
the handset to the charger after each phone call.  
Step 3:Register the Handset  
YOU NEED TO REGISTER THE DECT1820 TO THE MAIN BASE  
BEFORE USE!  
For Main Base Models DECT1825, DECT1825+1, DECT1855 and  
DECT1855+1, When you register a new handset to your base, you  
will be asked to enter the base PIN code.  
The pre-set PIN code is 0000. If you wish you can change this  
code, see owner's manual for detailed instruction.  
Before registering, make sure that you have the base and handset  
in front of you. Also, make sure all handsets and the base are in  
standby mode.  
[3]  
 
On the DECT1820 handset you want to register:  
1. Press  
menu/ok  
to access the main menu.  
2. Press up or down key until "Add.Settings" is displayed and  
press  
menu/ok  
.
Press up or down key to display "Register" and press menu/ok  
.Press up or down key to select your base number and press  
menu/ok  
.
On your original base:  
Press and hold find handset for approx. 3 seconds until you hear  
the registration tone. You are now in ‘registration mode’.  
If the base already has the maximum number of handsets (6)  
registered to it you will need to de-register one of the existing  
handsets before you can register the new handset.  
See section below for de-registering handsets.  
On the DECT1820 handset:  
Enter the base PIN code. Pre-set base PIN code is 0000. You will  
hear a confirmation tone when registration is complete.  
When in standby mode, the new handset number will be displayed.  
The handset will automatically be allocated with the next available  
handset number.  
If registration is unsuccessful, the display will show Not  
Registered and you will need to follow the registration  
procedure again.  
[4]  
 
If you have more than one handset registered to your base you can  
de-register a handset or the bases registered to use. Before de-  
registering, make sure all handsets and the base are in standby  
mode.  
menu/ok  
1 Press  
to access the main menu.  
2 Press up or down key until Add. Settings is displayed and  
press  
menu/ok  
.
menu/ok  
3 Press up or down key to display Deregister and press  
.
4 Press up or down key to select Handset or Base and pressmenu/ok  
.
5 Press up or down key to display the handset or base you want  
to de-register and press  
menu/ok  
.
menu/ok  
6 Press up or down key to select Yes and press  
.
If the handset has been registered to the base successfully, you  
will hear a confirmation tone.  
end  
7 Press  
to exit and return to standby.  
Your phone is GAP compatible, which means you can  
register your DECT1820 handset to other DECT  
(Digitally enhanced cordless telephone) GAP  
compatible bases.  
To Register your handset to another manufacturer's  
base. Follow the procedure for registering shown in the  
other manufacturer's user guide.  
You can register a DECT1820 handset to up to 4 bases,  
e.g. one at work and one at home, and switch between  
them.  
[5]  
 
Using Your Expansion Handset  
Now that your new handset is registered, it can perform all the  
same functions as the handsets originally included with your phone.  
With your new handset, you can  
Transfer calls between handsets  
Use two handsets as 2-way radios in DirectLink (Walkie-Talkie)  
mode  
Hold conference calls  
Access the integrated answering device or voice mail using  
Handset  
See the owner's manual that came with your main base for  
complete instructions on operating your new expanded phone.  
[6]  
 
Battery Information  
Low battery alert  
If the symbol is displayed on the handset, "Charge Battery"  
appears and you hear the low battery tone, you will need to  
recharge your handset. We recommend that you place the handset  
back on the charger between use to ensure that it is always fully  
charged.  
Cleaning the battery charging contacts  
To maintain a good charge, clean the  
charging contacts on the  
handset once a month. Dampen a cloth  
with plain water. Gently rub  
the damp cloth over the charging contacts  
until all visible dirt is  
removed. Dry the contacts thoroughly  
before returning the handset  
to the cradle.  
Caution: Do not use paint thinner,  
benzene, alcohol, or other chemical  
products. Doing so may discolor the  
surface of the telephone and damage the  
finish.  
[7]  
 
Quick Guide  
Function  
Button press  
talk  
Make a call  
, enter number.  
talk  
Preparatory call  
Enter number,  
.
Adjust earpiece volume During a call,  
or  
.
rdl  
End a call  
Receive a call  
Redial  
end  
talk  
Phone rings,  
.
talk  
rdl  
rdl then  
or  
to display number,  
Privacy  
During a call,menu/ok and select Mute,  
repeat the same step to select  
"Un Mute" to resume a call  
[8]  
 
menu/ok  
Store phonebook  
number  
thenmenu/ok, select New Entry,  
,enter  
name,menu/ok , enter number, menu/ok  
.
Select Tone,menu/ok , then select Save,menu/ok  
.
talk  
Dial phonebook number  
Handset ringer melody  
then  
or  
,
.
rdl  
menu/ok  
menu/ok  
then  
or  
to Audio Settings  
menu/ok  
rdl  
rdl  
Press  
Press  
or  
or  
to Ringer Type  
then  
to select External,  
rdl  
Internal, Paging, Alarm, or  
Appointmentmenu/ok  
.
Press  
or  
to select the melody,menu/ok  
.
rdl  
int'com  
Make internal call  
then  
or  
to select internal  
rdl  
handset number,menu/ok or  
.
talk  
[9]  
 
Warranty  
UNIDEN DECT1820 Cordless Phone  
Limited One Year Warranty  
Note:  
Please keep your sales docket as it provides evidence of warranty.  
Warrantor: Uniden Australia Pty Limited ABN 58 001 865 498  
Uniden New Zealand Limited  
Warranty only available in original country of purchase  
Elements of Warranty: Uniden warrants to the original retail owner for the duration of  
this warranty, its DECT1820 Cordless Phone (hereinafter referred to as the Product) to  
be free from defects in materials and craftsmanship with only the limitations or  
exclusions set out below.  
Warranty Duration: This warranty to the original retail owner only, shall terminate and  
be of no further effect ONE (1) Year after the date of original retail sale. This warranty  
will be deemed invalid if the product is; (A) Damaged or not maintained as reasonable  
and necessary, (B) Modified, altered or used as part of any conversion kits,  
subassemblies, or any configurations not sold by Uniden, (C) Improperly installed, (D)  
Repaired by someone other than an authorised Uniden Repair Agent for a defect or  
malfunction covered by this warranty, (E) Used in conjunction with any equipment or  
parts or as part of a system not manufactured by Uniden, (F) Installed, programmed or  
serviced by anyone other than an authorised Uniden Repair Agent, or (G) Where the  
Serial Number label of the product has been removed or damaged beyond recognition.  
Parts Covered: This warranty covers for 1 year, the Handset and Charger Unit only.  
Accessories: Batteries, AC adaptor etc are covered for 90 days.  
Statement of Remedy: In the event that the product does not conform to this warranty  
at any time while this warranty is in effect, the warrantor at its discretion, will repair the  
defect or replace the product and return it to you without charge for parts and service.  
THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT  
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS  
GUARANTEE IS IN ADDITION TO AND DOES NOT AFFECT YOUR RIGHTS UNDER  
THE CONSUMER GUARANTEES ACT.  
Procedure for obtaining performance or warranty: In the event that the Product  
does not conform to this warranty, the Product should be shipped or delivered, freight  
prepaid, with evidence of original purchase, (eg. a copy of the sales docket), to the  
warrantor at:  
UNIDEN AUSTRALIA PTY LTD  
Service Division  
UNIDEN NEW ZEALAND LTD  
Service Division  
345 Princes Highway,  
Rockdale, NSW 2216  
Fax (02) 9599 3278  
150 Harris Road, East Tamaki,  
Auckland  
Fax (09) 274 4253  
Customers in other states should ship or deliver the Product freight pre-paid to the  
nearest Uniden Authorised Repair Centre. (Contact Uniden for the Warranty Agent  
nearest you.)  
[10]  
 
© 2005 Uniden Australia Pty Limited/Uniden New Zealand Limited  
Printed in China UUZZ01429ZZ(0)  
 

Technicolor Thomson CRT Television ITC250 User Manual
Texas Instruments Calculator CS FX300MS PLUS User Manual
Toshiba Cell Phone Digital Telephone User Manual
Toshiba Personal Computer PRO T210 User Manual
TP Link Home Security System TL SC2020N User Manual
Triarch Indoor Furnishings 34113 User Manual
True Manufacturing Company Refrigerator GDM 23 User Manual
Turbosound Portable Speaker TQ 230 User Manual
ViewSonic Computer Monitor VS12915 User Manual
ViewSonic Projector PJ559D User Manual