TrekStor MP3 Player iBeat 115 User Manual

 
 
Contents  
1.1 Device Diagram . . . . . . . . . . . . . . . . . . . . . .  
3
3
5
5
5
5
6
6
6
7
7
8
8
9
9
2.1 Power On/Off . . . . . . . . . . . . . . . . . . . . . . .  
2.2 Basic functions . . . . . . . . . . . . . . . . . . . . . .  
2.2.1 Volume Control . . . . . . . . . . . . . . . . . .  
2.2.2 Play / Pause / Stop . . . . . . . . . . . . . . .  
2.2.3 Fast Forward/Next . . . . . . . . . . . . . . . .  
2.2.4 Rewind/Previous . . . . . . . . . . . . . . . . .  
2.2.5 A-B Repeat . . . . . . . . . . . . . . . . . . . .  
2.2.6 Lock Keys . . . . . . . . . . . . . . . . . . . . .  
2.3 Menu Mode . . . . . . . . . . . . . . . . . . . . . . . .  
2.3.1 Voice Recording . . . . . . . . . . . . . . . . . .  
2.3.2 Change EQ mode . . . . . . . . . . . . . . . . .  
2.3.3 Switch playback mode . . . . . . . . . . . . . .  
I
 
Contents  
2.3.4 Preview Songs . . . . . . . . . . . . . . . . . . . 10  
2.3.5 Delete one track . . . . . . . . . . . . . . . . . . 10  
2.3.6 Delete all tracks . . . . . . . . . . . . . . . . . . 11  
2.3.7 Memory . . . . . . . . . . . . . . . . . . . . . . 11  
2.3.8 Backlight . . . . . . . . . . . . . . . . . . . . . 12  
2.3.9 Contrast . . . . . . . . . . . . . . . . . . . . . . 12  
2.3.10 Auto shutdown . . . . . . . . . . . . . . . . . . 13  
2.3.11 Play Time Setting . . . . . . . . . . . . . . . . . 13  
2.3.12 Set Display Language . . . . . . . . . . . . . . . 13  
15  
3.1 System Requirements . . . . . . . . . . . . . . . . . . . 15  
3.2 Installation guidelines . . . . . . . . . . . . . . . . . . . 16  
3.3 Remove the player from the PC . . . . . . . . . . . . . . 16  
3.4 Downloading Audio Files . . . . . . . . . . . . . . . . . 17  
4.1 Firmware update and format . . . . . . . . . . . . . . . 19  
4.2 Technical Specifications . . . . . . . . . . . . . . . . . . 21  
19  
23  
II  
TrekStor  
 
Caution  
1. Do not subject the device to severe impact or drop it from high  
position.  
2. Do not use the player in extreme hot or cold, dusty or damp field.  
Do not expose it to direct sunshine.  
3. Back up the data frequently in case of accident data loss.  
4. Avoid using the player in strong magnetic field.  
5. Keep the device away from water or other liquids. In the event  
that water or other liquids enter the device, power off the product  
immediately and clean it.  
6. Do not use chemical solution to clean the device in order to avoid  
corrosion. Clean it with a dry cloth.  
7. We are not responsible for the damages or lost data caused by  
malfunction, misusing, repairing the device or battery replacement.  
8. Do not attempt to disassemble, repair or modify the product, or it  
will be out of guarantee.  
 
 
1 Getting Started  
1.1 Device Diagram  
A
B
Neck Strap Holder  
Built-in Microphone  
3
 
   
1 Getting Started  
C
D
E
G
F
G
H
I
LCD  
Volume Decrease ’V-’ Key  
Next  
Previous  
button (Play/Pause/OK/On/Off)  
Previous  
Volume Increase ’V+’ Key  
Earphone Jack  
J
Battery Cover  
K
L
M
N
USB-Cover  
’Hold’-Switch (locked)  
’M’ Key (Menu)  
’A-B’ Key / Record  
4
TrekStor  
 
2 How to use the TrekStor i.Beat 115  
2.1 Power On/Off  
To turn on the device, press and hold the ’ ’ key for 2 seconds. To shut  
down, hold the ’ ’ key for a while, the display shows ’Shut Down’ and  
then shut down immediately.  
2.2 Basic functions  
2.2.1 Volume Control  
Press the ’V+’ key to increase the volume or press the ’V-’ key to decrease  
the volume.  
5
 
       
2 How to use the TrekStor i.Beat 115  
2.2.2 Play / Pause / Stop  
When powered on, the player enters the MUSIC mode, which is defaulted  
by the device. To play music, press the ’ ’ key shortly. Press the ’  
key during playback, the music pauses. To resume, press it again. Press  
and hold the ’ ’ key for about 0.5 second, the music stops.  
2.2.3 Fast Forward/Next  
During playback, press the ’ ’ key and hold it. The playback begins to  
fast forward. Release the key, the music plays normally. Press the ’  
key once to play the next song.  
2.2.4 Rewind/Previous  
During playback, press the ’ ’ key and hold it. The playback begins to  
rewind. Release the key, the music plays normally. Press the ’ ’ key once  
to play the previous song.  
6
TrekStor  
 
     
2.2 Basic functions  
2.2.5 A-B Repeat  
During playback, press the ’A-B’ -button to select the start point of the  
loop. Press the ’A-B’ -button again to select the end point. LCD displays  
’A-B’ , and the section between the start point and the end point begins  
to be played repeatedly. To cancel A-B repeat, press the ’A-B’ -button.  
Note: The interval between ’A’ and ’B’ should be more than 2 seconds.  
2.2.6 Lock Keys  
To lock keys against accidentally being pressed, push the ’HOLD’-switch  
to the locked position. All keys remain unavailable then. To unlock the  
keys, push the ’HOLD’-switch to the unlocked position.  
Tip: When the keys are locked, you are unable to turn on  
the device. So ensure to unlock the keys before turning on  
the player.  
TrekStor i.Beat 115  
7
 
   
2 How to use the TrekStor i.Beat 115  
2.3 Menu Mode  
This device provides menu modes to control some advanced features. To  
enter the main menu, press the ’M’ key. Press the ’ ’ or ’ ’ key to  
switch between the menu items, and confirm selected item by pressing  
the ’ ’ key. To return to the previous menu level you can press the ’M’  
key. Or let it return automatically by doing nothing to the menu within  
5 seconds.  
2.3.1 Voice Recording  
To enter the main menu, press the ’M’ key. Press the ’ ’ or ’ ’ key to  
switch to the ’Voice’ item. Confirm selected item by pressing the ’  
key. Now you are in the VOICE mode. To start voice recording, press  
the ’A-B’ key until ’Rec’ flashes on the LCD. The actual record time is  
displayed. The available record time depends on the memory capacity of  
the MP3 player.  
To end recording, press the ’A-B’ -ke yslightly. The recorded file is saved  
in folder VOICE. Now you can press the ’ ’ key to play the voice file  
that you just recorded.  
8
TrekStor  
 
   
2.3 Menu Mode  
To play the voices file that already stored in the player, enter the main  
menu by pressing the ’M’ key. Press the ’ ’ or ’ ’ key to switch to the  
’Voice’ item. Press the ’ ’ or ’ ’ key to choose the voice file that you  
want to play, and press the ’ ’ key to play the selected file. To pause  
during playback, press ’ ’ ; To resume, press it again. Hold the ’  
key for about 0.5 seconds and the playback stops.  
Tip: If there is no voice file stored in the player, it displays No Audio  
file.  
2.3.2 Change EQ mode  
To enter the main menu, press the ’M’ key. Press the ’ ’ or ’ ’ key to  
switch to the ’EQ’ item, and then press the ’ ’ key again to reveal the  
EQ modes. Choose one of the 6 EQ modes and then press the ’ ’ key  
to confirm the selected mode.  
2.3.3 Switch playback mode  
To enter the main menu, press the ’M’ key. Press the ’ ’ or ’ ’ key to  
switch to the ’Repeat’ . Press the ’ ’ key to reveal the optional modes.  
Choose and then press the ’M’ key to confirm the selected mode.  
TrekStor i.Beat 115  
9
 
   
2 How to use the TrekStor i.Beat 115  
’Normal:’ Play all tracks in order and stop after playing all.  
’One:’ Keep repeating the current track.  
’All:’ Play all tracks in order and repeat.  
’Shuffle:’ Play all tracks randomly and stop after playing.  
’Rep Shuffle:’ Keep repeating all tracks randomly.  
2.3.4 Preview Songs  
To enter the main menu, press the ’M’ key. Press the ’ ’ or ’ ’ key to  
switch to the ’Preview’ item. Press the ’ ’ key to start preview. In  
the preview mode, the player will play the first 10 seconds of every track  
in order and stops after the last track has been played. To exit preview,  
press the ’M’ key. It will return to the main menu.  
2.3.5 Delete one track  
To enter the main menu, press the ’M’ key. Press the ’ ’ or ’ ’ key  
to switch to the ’Delete One’ item and press the ’ ’ key to select  
it. When the display shows ’Delete File?’ choose the track that you  
want to delete. Press the ’ ’ to confirm deletion. ’Delete ok’ will  
10  
TrekStor  
 
   
2.3 Menu Mode  
display on the LCD, which indicates the track has been deleted. Or, press  
the ’M’ key to cancel delete operation.  
2.3.6 Delete all tracks  
To enter the main menu, press the ’M’ key. Press the ’ ’ or ’ ’ key  
to switch to the ’Delete All’ item and press the ’ ’ key to select it.  
When the display shows ’Delete All Files?’ press the ’ ’ key to  
confirm deletion. ’Delete ok’ will display on the LCD, which indicates  
all tracks have been deleted. Or, press the ’M’ key to cancel delete  
operation.  
2.3.7 Memory  
To enter the main menu, press the ’M’ key. Press the ’ ’ or ’ ’ key to  
switch to the ’Memory’ item. Press the ’ ’ button to enter the menu.  
Total memory and the remaining space will be shown.  
TrekStor i.Beat 115  
11  
 
   
2 How to use the TrekStor i.Beat 115  
2.3.8 Backlight  
To set the backlight time press the ’M’ key to enter the main menu.  
Press the ’ ’ or ’ ’ key to select ’Backlight’ and press the ’ ’ key to  
display its options. Select among the four options ’5 Secs’ , ’10 Secs’ ,  
’Always on’ and ’Disable’ by turning the Control Wheel. Press the  
key to confirm your selection.  
According to this setting, the backlight will last for the preset time when  
any key is pressed.  
2.3.9 Contrast  
To set the background against the foreground contrast press the ’M’ key  
to enter the main menu. Press the ’ ’ or ’ ’ key to select ’Contrast’  
and press the ’ ’ key to confirm. Adjust the contrast using the ’ ’ or  
key. Press ’ ’ to decrease the contrast or press ’ ’ to increase the  
contrast. Press the ’ ’ key to confirm the setting.  
If you want to reserve the previous setting, just press the Control Wheel.  
12  
TrekStor  
 
   
2.3 Menu Mode  
2.3.10 Auto shutdown  
To set the time before the player is shut down automatically when it is  
idle press the ’M’ key to enter the main menu. Press the ’ ’ or ’ ’ key  
to select ’Shut down’ by turning the Control Wheel and press the ’  
key to reveal its option. Select the desired option and press the ’ ’ key  
again to confirm your selection.  
According to this setting, the player will be turned off automatically when  
it is idle for selected time.  
2.3.11 Play Time Setting  
To power off automatically after a preset playing time is elapsed press the  
’M’ key to enter the main menu. Press the ’ ’ or ’ ’ key to select ’Play  
time’ and press the ’ ’ key to reveal its option. Select the desired time  
press the ’ ’ key to confirm your selection.  
2.3.12 Set Display Language  
TrekStor i.Beat 115 supports several different languages. To select the  
display language, press the ’M’ key to enter the main menu. Select the  
TrekStor i.Beat 115  
13  
 
     
2 How to use the TrekStor i.Beat 115  
’Language’ menu and press the ’ ’ key again to reveal the provided  
languages. Select the desired language and press the ’ ’ key to con-  
firm.  
14  
TrekStor  
 
3 Connecting the player to the PC  
3.1 System Requirements  
Microsoft WindowsTM 98/ME/2000/XP  
CD-ROM Drive  
Pentium 200MHz  
RAM 32MB (Windows ME, 2000) - 64MB (Windows XP)  
USB-Port  
The TrekStor i.Beat 115 is a plug & play device. It is driverless for  
WIN2000/XP. But for WIN98, you are required to install the driver first  
before connecting it to the computer. For Windows 2000 or Windows  
XP, it is recommended to install the driver also so that you can upgrade,  
initialize or recover the system.  
15  
 
   
3 Connecting the player to the PC  
3.2 Installation guidelines  
Warning:  
Windows 98 users are required to install the  
driver first before connecting the TrekStor i.Beat 115 to the  
computer.  
Insert the driver CD into the CD-ROM drive. The TrekStor menu  
appears.  
Click on ’Driver / Tools’ .  
Follow the instructions of the installation program.  
3.3 Remove the player from the PC  
To avoid possible data loss, please remove the player from the PC safely.  
For WIN2000/XP, double click the  
at the right hand corner of the  
taskbar. Click ’Stop’ to stop the device and then click ’OK’ . When the  
following message prompts, pull out the MP3 player.  
For Win98, please make sure the player has stopped transferring data  
before unplugging the MP3 player. When ’Writing’ shows on the LCD  
16  
TrekStor  
 
   
3.4 Downloading Audio Files  
display, it indicates that data transfer is in progress. When ’Ready’  
displays, it means transfer is over, you can unplug the player now.  
3.4 Downloading Audio Files  
The TrekStor i.Beat 115 can be used as a USB Flash Disk when it is  
connected to the PC. You can copy audio files in MP3 or WMA format  
from the PC to the removable disk, or do the reverse. To download files  
from the PC, connect the player to the PC, and copy audio files stored  
on the PC to the removable disk which represents the player.  
Notice: Only music file in MP3 and WMA format can be shown on the  
LCD.  
TrekStor i.Beat 115  
17  
 
 
 
4 Additional information about the TrekStor  
i.Beat 115  
4.1 Firmware update and format  
If you want to update the system, please do as follows:  
1. Take out the battery before connecting the player with the com-  
puter.  
2. Press and hold the Play button while connecting the player with  
the computer by the USB port.  
3. Click ’Start’ ’Program’ ’TrekStor i.Beat 115 ’ and then ’up-  
date’ . The TrekStor i.Beat 115 Update dialogue pops up.  
19  
 
   
4 Additional information about the TrekStor i.Beat 115  
Select the ’Format data area’ option and start formatting pro-  
cess. Thus the system will be formatted and updated.  
20  
TrekStor  
 
4.2 Technical Specifications  
4.2 Technical Specifications  
Capacity  
Dimensions  
LCD  
64MB/128MB/256MB/512MB  
80 mm x 36 mm x 17.5 mm  
64 x 48 Pixel, EL Backlight  
Temperature  
Relative Humidity  
Battery Type  
Battery Life  
Audio File Format  
-10 C – +55  
20% – 90%  
AAA-size alkaline  
C
6-10 h  
MPEG1/2/2.5 Audio Layer3 (.MP3);  
Window Media Audio (.WMA);  
5 mW + 5 mW  
Earphone Power  
Output Frequency  
20 Hz - 20 kHz  
Signal-To-Noise Ratio > 90 dB  
EQ Modes  
Record Format  
Record Bit Rate  
USB  
Normal, Classic, Jazz, Pop, Rock, Bass  
WAV  
8 kbps  
USB Version 2.0  
TrekStor i.Beat 115  
21  
 
 
 
5 Troubleshooting  
The LCD displays nothing when the ’ ’ key is pressed:  
Possible Cause:  
No battery or battery is  
Solution:  
Install or replace the bat-  
too low.  
tery.  
The keys are locked.  
Unlock the Hold switch.  
When the player is connected to the PC, the removable disk cannot  
be opened:  
Possible Cause:  
The FAT table of the flash  
Solution:  
Use the enclosed driver to  
format the player.  
disk is damaged due to in-  
correct operations.  
23  
 
 
5 Troubleshooting  
The player cannot be powered on even the battery is replaced:  
Possible Cause:  
FAT table in the flash  
Solution:  
Take out the battery.  
memory may have errors in  
the case of strong magnet,  
static, and incorrect dis-  
connection.  
Connect the player to the  
PC and hold down the Play  
key for about 3 seconds.  
When a removable disk is  
found in ’My Computer’,  
use the driver to format  
and update the player.  
Unplug the player when  
you finish formatting and  
updating and retry.  
The player cannot be connected to the PC:  
Possible Cause:  
The keys are locked by  
Hold switch  
Solution:  
Slide the Hold switch to  
the unlocked position.  
24  
TrekStor  
 
Press the ’ ’ key after turning on, while the player has no  
response:  
Possible Cause:  
The volume is too low.  
Solution:  
Adjust the volume.  
There are problems with  
the audio file.  
Delete the file or play other  
files.  
No sound when playing music or voice file:  
Possible Cause:  
The driver is not installed  
Solution:  
Install or reinstall the  
driver shipped with the  
player.  
Update or replace the PCs  
motherboard.  
or destroyed.  
The USB interface is not  
supported by PC’s mother-  
board.  
The displayed time is changing constantly:  
Possible Cause:  
The bit rate of the MP3  
Solution:  
Try to use fixed bit rate to  
compress the MP3 file.  
file is changing during  
playback.  
TrekStor i.Beat 115  
25  
 
5 Troubleshooting  
The PC has error when you plug and unplug the player:  
Possible Cause:  
The player is disconnected  
Solution:  
Do not disconnect the  
from the PC abruptly while  
transferring files.  
player from the PC when  
transferring files.  
Total memory displayed on the player is not in accordance with the  
marked amount:  
Possible Cause:  
Part of memory is used to  
store programs and display  
characters.  
Some of MP3 files cannot be played properly:  
Possible Cause:  
The MP3 file is com-  
Solution:  
Delete the unsupported  
pressed by a standard, such  
as MPEG I Layer 1 or Layer  
2 that the player does not  
support.  
MP3 files.  
Use MPEG I Layer 3 stan-  
dard to compress the un-  
supported MP3 files.  
26  
TrekStor  
 
TrekStor  
 
TrekStor  
TrekStor GmbH & Co. KG  
TrekStor i.Beat 115 - user manual  
ib115-AT-V1.0-EN-041212a  
 

TDK Printer BHP6321FU User Manual
Teac Radio SR LX5i User Manual
Team Products Laser Level CL2060 User Manual
Toshiba All in One Printer e STUDIO4500c User Manual
Trane Heat Pump GETB User Manual
Trane Thermostat BMTK SVN01D EN User Manual
Transcend Information Computer Drive StoreJet 25 Version 13 User Manual
Triarch Indoor Furnishings 75277 15 User Manual
ViewSonic Camcorder VS13782 User Manual
VTech Motorized Toy Car jagger the t rex User Manual