Physical Description
Package Contents
Before hardware connection, please write down the
Wireless Password and SSID found on the label of your
TL-WR710N. Both are case-sensitive.
TL-WR710N LED Guide:
LED
Status
The device is working properly.
Solid Blue
System is booting.
Blinking
The Ethernet Cable or USB Device is
connecting to the product.
15
0M
bp
s
TL
-WR7
10
N
Quick Installation Guide
150Mbps Wireless N Mini Pocket Router - Advanced Edition
ꢂꢃꢄ.CQTꢁ8JSFMFTTꢁ/ꢁ.JOJꢁ1PDLFUꢁ3PVUFS
ꢅ"EWBODFEꢁ&EJUJPO
.PEFMꢀ 5-ꢃ83ꢋꢁꢂ/
Model:TL-WR710N(US) Ver:1.0
1PXFSꢀꢀꢁꢂꢂꢃꢄꢅꢂ7_ꢀꢆꢂꢇꢈꢂ)[ꢀꢂꢉꢊ"
%FGBVMUꢁ"DDFTTꢀ
S/N:XXXXXXXXXXXX
IUUQꢌꢇꢇUQMJOLMPHJOꢉOFU
6TFSOBNFꢌꢀBENJO
1BTTXPSEꢀꢌꢀBENJO
MAC:B0487A663D6C
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
IC: 8853A-WR710N
USB Reset LAN/WAN
LAN
TL-WR710N
Ethernet Cable
Model:TL-WR710N(US) Ver:1.0
S/N:XXXXXXXXXXXX
USB：Connect
a
USB Flash drive or External Hard Drive for file
sharing. It can also be used as a charging station for mobile devices.
MAC:B0487A663D6C
Reset：Resets the TL-WR710N to factory default settings.
LAN/WAN: Must use this port to connect to your Modem while in Router
mode. For all other modes, use it as an additional LAN port.
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
150Mbps Wireless
N
Mini Pocket Router - Advanced Edition
LAN: Connect your ethernet enabled devices for wired network access.
In client mode, use it to give wireless access to a wired-only device. In
access point mode, use it to receive network access from your local
network.
MODEL NO. TL-WR710N
Resource CD for User Guide Only
QIG
For more detailed information about Reset, please refer to
Wireless Password/PIN
:
Default Password
Appendix: Troubleshooting
.
SSID Default Network Name
:
MODEL NO. TL-WR710N
Operating Modes
1
Wireless Router Mode (Default)
Create an instant password-protected wireless
network with an NAT Firewall and share internet with
multiple devices. This mode is suitable for hotel
rooms and home networks.
2
Client Mode
Use as a wireless adapter for wired-only Ethernet
enabled devices. This mode is suitable for
connecting Smart TVs, game consoles, or computers
to your wireless network.
3
4
Access Point Mode
5
WISP Client Router Mode
Use as a client router to receive internet access
from a Wireless Internet Service Provider (WISP),
and share that access with local devices.
Repeater Mode
Repeat signal from an existing wireless network.
This mode is suitable to extend wireless coverage,
reaching devices that were previously too far from
Create
a
wireless network from an Ethernet
connection. This mode is suitable for dorm rooms
or homes if there's already a wired router but you
need a wireless hotspot.
your primary router to maintain
connection.
a
stable wireless
(Note: if the hotel’s Internet has an authentication
process, you will need to authenticate only once and
only on one device)
(Note: if the hotel’s Internet has an authentication
process, you will need to authenticate it on EACH
device.)
The repeated signal will display the same network
name and password as your existing wireless
network.
Protected by NAT Firewall
def
Wired Ethernet
Connection
Wired Ethernet
Connection
.
ocedure is the same
erent, but the pr
eenshots may look diff
ystem, your scr
, or a Mac Operating S
erent Windows
f you are using a diff
om Windows 7. I
ed below are fr
The examples illustrat
Instant Wireless Connection
Plug the TL-WR710N into
near your modem or a wired ethernet connection.
Wait until the LED is blinking.
a
power outlet that is
If you are connecting the TL-WR710N directly to
your cable modem, you must first power reset the
modem and wait until its ONLINE LED is solid.
Then use an ethernet cable to connect to your
modem via the LAN/WAN port on the TL-WR710N.
Click the Wireless Network icon on your desktop
( or ). Select the Default SSID of the
TL-WR710N, then click Connect.
Enter the Default Password, then click OK or
Next.
Congratulations! You have successfully
connected to your network!
1
2
3
4
5
Currently connected to:
Not Connected
If you are connecting the TL-WR710N to an existing
network, simply plug the ethernet cable into the
LAN/WAN port and to your network.
TP-LINK_XXXXXX
Internet access
Connections are available
In either case, wait until the LED is solid blue.
Wireless Network Connection
Wireless Network Connection
Connected
TP-LINK_XXXXXX
TP-LINK_ XXXXXX
Connect automatically
Connect
TP-LINK_Home
TP-LINK_Guest
TP-LINK_Neighbor
Free Public WiFi
TP-LINK_Home
TP-LINK_Guest
TP-LINK_Neighbor
Free Public WiFi
LAN
Open Network and Sharing Center
Wired Ethernet
Connection
Open Network and Sharing Center
eset LAN/WAN
Customizing your Wireless Network Name & Password (Optional)
Open a web browser and go to the page
To customise your Wireless Network Name Click
on “Wireless”from the menu on the left.
In the “Wireless Network Name” box, type in
your new Wireless Name. Then click “Save”.
To customise your Wireless Password, click
“Wireless” from the menu on the left, then click
“Wireless Security”.
In the “Wireless Password” box under
“WPA/WPA2 - Personal (Recommended)” type
in your new wireless Password. Then click “Save”.
5
1
2
3
4
Wireless Settings
Wireless Settings
Disable Security
Wireless Network Name:
(Also called the SSID)
INSERT CUSTOM SSID HERE
WPA/WPA2 Personal (Recommended)
-
Region:
United States
Warning:
Ensure you select correct country to conform local law.
Incorrect settings may cause interference.
a
Status
Status
Version:
WPA2-PSK
Status
Quick Setup
Quick Setup
WPS
Wireless Set
Encryption:
AES
Mode:
Channel Width:
Channel:
11bgn mixed
Auto
Wireless Password:
INSERT CUSTOM PASSWORD HERE
WPS
Enter the login username: admin and
password: admin.
(You can enter ASCII characters between and 63 or Hexdecimal
8
Working Mode
Network
Working Mode
Auto
Seconds (Keep it default if you are not sure,
m
Group Update Key Period:
Network
Wireless Ne
Enable Wireless Router Radio
Enable SSID Broadcast
Enable WDS Bridging
Wireless
Wireless
WPA/WPA2
-
Enterprise
Version:
Encryption:
DHCP
- Wireless Settings
- Wireless Security
- Wireless MAC Filtering
- Wireless Advanced
- Wireless Statistics
DHCP
Automatic
Automatic
Save
admin
LAN
USB Settings
Forwarding
Security
Radius Server IP:
Radius Port:
1812
0
(1-65535, stands for default port 1812)
0
Ch
Radius Password:
Parental Control
Access Control
Advanced Routing
Bandwidth Control
IP & MAC Binding
Dynamic DNS
System Tools
Group Update Key Period:
(In seconds, minimum is 30, means no upda
0
USB Settings
WEP
Wireless
Forwarding
Automatic
Hexadecimal
WEP Key
Type:
Security
WEP Key Format:
Parental Control
Access Control
Advanced Routing
Bandwidth Control
IP & MAC Binding
Dynamic DNS
System Tools
Key Selected:
Key Type
Key 1:
Disabled
Key 2:
Key 3:
Key 4:
Disabled
Disabled
Disabled
Save
|