Rosewill Computer Drive RX81US HT 25A BLK User Guide

External Enclosure for  
2.5" SATA to USB + eSATA  
RX81US-HT-25A-BLK  
User Manual  
 
External Enclosure for 2.5” SATA to USB  
+
eSATA  
User Manual  
Feature  
Standard USB 2.0 high speed transfer rate.  
Support Serial ATA. (USB + eSATA).  
eSATA transfer rate up to 3.0Gbps(NCQ support)  
Suitable for 2.5" HDD.  
All aluminum, to enhance heat dissipation.  
Plug and play / hot swappable.  
OS support Win 98SE/ME/2000/XP/Vista/Mac OS 8.6 above.  
Technical Specifications  
USB v 2.0 / eSATA  
Bus Interfaces:  
Data Speeds  
USB 2.0 = 480 Mbps  
eSATA = 3 Gbps (NCQ Support)  
Connectors  
SATA Standard  
LED  
USB mini B receptacle / eSATA connectors  
Compliant with SATA I / II with NCQ support  
Power On / Access  
Dimensions  
132*82*18 mm ( L*W*H)  
2
 
External Enclosure for 2.5” SATA to USB  
+
eSATA  
User Manual  
Installation Guide  
1. Release the screws to pull out the HDD frame.  
2. Fix the HDD by screws (after HDD located with the connecter).  
3. Pull in the frame into external box.  
4. Fasten the rear panel by screws.  
5. After connect transfer cable and Power cord, the external HDD will  
appear the relativity.  
3
 
External Enclosure for 2.5” SATA to USB  
+
eSATA  
User Manual  
Attention  
Only one interface at the time can be used(combo model)  
If this HDD is new one, please partition & format disk, otherwise  
the system cannot detect HDD.  
The HDD jumper should be set to “master”.  
Make sure your PCI Host Card is installed correctly  
If required, update your OS (win 2000 to SP4, Win XP to SP1a)  
Only one computer at the time can access the drive  
Driver Installation  
Windows 98SE  
After plug the external box into, the system will remind you there  
is a new hardware of USB Storage Adapter add into.  
Design the driver of the safe path (in the driver), the system will  
active the installation automatically.  
After for a while, click "My Computer", USB HDD will appear the  
relativity on the PC.  
Windows ME/2000/XP/Vista  
The system already provided support for the software.  
MAC OS 9.x/above  
OS 9.X edition:  
The system already provides support for the software.  
4
 
External Enclosure for 2.5” SATA to USB  
+
eSATA  
User Manual  
The divided partition of the external HDD  
Win 98SE/ME SYSTEM  
FDISK is command that doing the divided partition to HDD, The step  
of how to divided partition from the HDD by using FDISK as follows:  
1. Plug the cable of USB into PC, and be sure that the PC has  
identified HDD.  
2. Execute "FDISK" under the model of COMMAND.  
3. After enter the FDISK program [If the FDISK program does not  
work, please restart your PC again (don't plug out the USB  
HDD) then it will be work]. Firstly select "The fifth item" --select  
the USB HDD you want to divided partition for and then just  
see the illustration as follows: Then just follow the instruction  
to divided partition for the HDD of USB.  
Windows 2000/XP/Vista  
Plug the HDD into your system, it will appear the hot plug a play.  
Just click “Control Panel”/ “manage tool” / “computer management”  
/ “Disk management”. All the disk connects to the PC will appear on  
the chart, as well as the state of the HDD. Find out the HDD and  
click the right bottom of the mouse under the state of chart, just  
follow the step. Take a look of the icon on the bottom.  
Mac OS  
Mac OS9.2 and earlier version does not support creating partition on  
an external HDD. For your new HDD, you need to purchase  
additional 3rd party software to creating your HDD partition.  
For Mac OS X, use the Disk Utility to format and divided partitions  
on your external disk.  
• Select “Disk Utilities” in the utilities folder.  
• Choose your external drive and format it.  
5
 
External Enclosure for 2.5” SATA to USB  
+
eSATA  
User Manual  
Notice: If you want your ENCLOSURE on a Windows as well as  
on your Mac OS, we recommend you to use a PC to format the  
drive. Choose FAT32 format and do not change anything on the  
partition or format on your Mac, otherwise the Windows OS can  
not be able to recognize the ENCLOSURE.  
To remove the device:  
For Windows 98SE Users  
Before you remove your device please wait for “Access LED”  
on reader stops blinking to prevent data loss.  
For Windows ME/2000/XP/Vista Users  
Please double-click the icon  
dialog box will appear.  
on the system tray. A  
Double-click the Generic USB Storage Device to remove the  
device for preventing from data loss.  
Mac OS  
You can remove the cable of USB after putting the icon of  
USB HDD on the desktop into the trash can.  
FAQ  
How to solve it if you can’t use the Mobile Disk under some OS:  
It doesn’t support any USB device under the WIN95 and NT4 OS, so  
that can’t use the Mobile Disk.  
After formatting can PC use in the MAC?  
If use the Mobile Disk in the PC, can just format directly. If the PC &  
MAC cannot be in common use, you can use the MACOPEN  
6
 
External Enclosure for 2.5” SATA to USB  
+
eSATA  
User Manual  
software (download from the Internet) in the PC, format to the MAC  
model. If you used the MO storage before, you must familiar and  
have more experience about it because MO storage has the same  
problem when doing the format.  
Why I can not see the drive?  
If you can not see the drive, make sure the jumper settings of your  
hard drive is “master”.  
Thank you for purchasing a quality Rosewill Product.  
future support for your product.  
7
 

Radio Shack Scanner Pro 60 User Guide
Ricoh Photo Scanner IS200e User Guide
Rockford Fosgate Car Speaker RFT3061A User Guide
Russound Speaker SUB105 User Guide
Ryobi Trimmer 2800r User Guide
Samsung CRT Television TXN 1430F User Guide
Samsung Flat Panel Television HP P5031 User Guide
Samsung Stereo System P10 User Guide
Samsung Washer B1113J B913J User Guide
Sanyei America Radio 78 16401 01 User Guide