Nokia Cell Phone 2855 User Manual

Nokia 2855 User’s Guide  
Copyright © 2006 Nokia. All rights reserved.  
i
 
Contents  
For your safety............................... vii Make calls................................................ 9  
call........................................................ 10  
Answer a call with the keypad  
About your device ............................... viii  
Network services.................................. viii  
Shared memory.......................................ix  
Welcome........................................... x  
Getting help............................................. x  
Find your phone label........................ x  
Nokia support and contact  
information........................................... x  
Additional information...................... x  
1. Phone at a glance........................1  
Keys and parts........................................ 1  
Standby mode......................................... 1  
Quick keys................................................ 2  
Indicators and icons ............................. 2  
Phone menus .......................................... 3  
Scroll method...................................... 3  
Main menu display............................ 4  
In-phone help...................................... 4  
Security feature ..................................... 4  
Go to functions...................................... 5  
Select options ..................................... 5  
Organise functions............................. 5  
Numbers (123).................................. 12  
Punctuation and special  
characters........................................... 12  
Predictive text mode .......................... 12  
Activate and deactivate................. 13  
Enter text ........................................... 13  
Change case and mode...................... 13  
Delete text............................................. 14  
2. Set up your phone.......................6  
Antenna.................................................... 6  
Battery...................................................... 7  
Remove the back cover .................... 7  
Remove the battery........................... 7  
UIM (CDMA SIM) card slot.............. 7  
Replace the battery........................... 7  
Replace the back cover .................... 8  
Charge the battery............................. 8  
Turn your phone on or off................... 8  
Connect the headset ............................ 8  
4. Messaging ..................................15  
Text messages....................................... 15  
Text message folders and options 15  
Write and send text messages..... 16  
Use a template.................................. 16  
Read and reply to text messages. 17  
Choose a text message option..... 17  
Use custom folders.......................... 18  
Delete text messages...................... 19  
Copyright © 2006 Nokia. All rights reserved.  
 
iii  
Text message settings.................... 19  
Multimedia messages........................ 20  
Multimedia message folders and  
options................................................ 21  
Write and send multimedia  
messages............................................ 21 Edit contacts ........................................ 36  
messages............................................ 22 Set up caller groups........................... 37  
Choose a multimedia message  
option.................................................. 23  
Delete multimedia messages........ 25  
Multimedia message settings...... 25 Set up voice tags................................. 37  
Distribution lists.................................. 27  
Create distribution lists................. 27  
Add and remove contacts ............. 27  
Use distribution lists....................... 27  
Voice messages.................................... 28  
Save voice mailbox number.......... 28 Set up speed dials............................... 39  
Call and set up your voice mail... 28  
Listen to your voice mail............... 28  
Automate voice mail ...................... 28  
Minibrowser messages...................... 29 Display phone number....................... 39  
5. Log..............................................30  
View missed calls................................ 30  
View received calls ............................. 30  
View dialled numbers......................... 30  
7. Gallery ........................................41  
View Message Recipients ................. 31 Open a folder ....................................... 41  
Time of call ........................................... 31 Gallery options..................................... 42  
Use other options................................ 31  
Clear log lists........................................ 31  
Call duration......................................... 31  
Data or fax calls.................................. 32  
Duration of minibrowser calls......... 32  
8. Media..........................................43  
Recorder ................................................ 43  
Record speech or sound................. 43  
Recording list.................................... 43  
6. Contacts .....................................33  
View contacts....................................... 33  
Search contacts................................... 33  
Add new contacts............................... 34  
Save a name and number ............. 34  
Save a number (only)...................... 34  
Save a contact.................................. 34  
9. Settings ......................................44  
Profiles................................................... 44  
Activate a profile............................. 44  
Personalise a profile ....................... 44  
Set a timed profile .......................... 44  
Display.................................................... 45  
Power saver....................................... 45  
Copyright © 2006 Nokia. All rights reserved.  
iv  
 
Standby mode settings................... 45  
Screen saver....................................... 45  
Banner................................................. 46  
Sleep mode ........................................ 46 Security .................................................. 58  
Backlight time-out .......................... 46  
Themes.................................................... 46  
Tones....................................................... 46  
Time and date....................................... 47  
Clock.................................................... 47  
Date...................................................... 47  
Auto-update of date and time..... 47 Application settings............................ 61  
Call........................................................... 48 Network.................................................. 61  
Anykey answer.................................. 48  
Automatic redial............................... 48  
Speed dials......................................... 48 Network services ................................. 62  
Answer when fold is opened......... 48 Store a feature code ....................... 62  
Calling cards...................................... 49 Restore factory settings .................... 63  
International prefix ......................... 50 Phone details........................................ 64  
Data and fax calls............................ 50  
Call summary..................................... 51  
Show call time on display ............. 51  
Ringing tone for no caller ID........ 51  
Phone...................................................... 51  
Language settings............................ 51  
Memory status.................................. 51  
Automatic keyguard........................ 51  
Navigation key.................................. 51  
DTMF tones........................................ 52  
Start-up tone .................................... 52  
Help text activation ........................ 52  
Voice commands.................................. 52  
Add a voice tag................................. 52  
Activate a voice command............ 53  
Voice command options................. 53  
Connectivity.......................................... 53  
Bluetooth connectivity................... 54  
Data cable transfer.......................... 56  
Data and fax transfer...................... 57  
Enhancement settings........................ 57  
Headset............................................... 57  
Handsfree........................................... 57  
Hearing aid ........................................ 58  
Calendar................................................. 66  
Open calendar................................... 66  
Calendar options.............................. 66  
Make a calendar note..................... 67  
View calendar notes (day view)... 67  
Options while viewing a day......... 67  
Receive a note in calendar format  
(vCal).................................................... 68  
Modify calendar settings............... 68  
Notes....................................................... 69  
Open notes......................................... 69  
Make a note....................................... 69  
Send a note........................................ 69  
Notes options.................................... 70  
To-do list................................................ 70  
Open to-do list ................................. 70  
Make a to-do list note ................... 70  
Copyright © 2006 Nokia. All rights reserved.  
 
v
Edit to-do list notes........................ 71 15. Reference information ............83  
View to-do list notes...................... 71  
Send a to-do list note.................... 71  
To-do list options ............................ 71  
Calculator.............................................. 72  
Use calculator................................... 72  
Currency converter.......................... 72  
Timers..................................................... 73  
Normal timer .................................... 73  
Interval timer.................................... 74  
Stopwatch............................................. 74  
Measure split or lap time.............. 74  
Save a time........................................ 75  
Stopwatch options.......................... 75  
Operation note................................. 75  
Certification information (SAR)........89  
11. Extras .......................................76  
Games..................................................... 76  
Select games..................................... 76  
Memory status ................................. 76  
Collection.............................................. 76  
Select application............................ 76  
Memory status ................................. 76  
12. Minibrowser.............................77  
Mobile Internet access...................... 77  
Sign on to the mobile Internet ....... 77  
Navigate the mobile Internet.......... 78  
Phone keys......................................... 78  
Receive a call while online........... 78  
Make an emergency call while  
online.................................................. 78  
Clear the cache and disconnect.. 78  
13. PC connectivity........................80  
PC data transfer .................................. 80  
Nokia PC Suite..................................... 80  
14. Enhancements..........................81  
Copyright © 2006 Nokia. All rights reserved.  
vi  
 
For your safety  
SWITCH OFF NEAR BLASTING  
Follow any restrictions.  
Do not use the phone  
where blasting is in  
progress.  
Read these simple guidelines.  
Not following them may be dangerous  
or illegal. Read the complete user  
guide for further information.  
SWITCH ON SAFELY  
USE SENSIBLY  
Use only in the normal  
Do not switch the phone  
on when wireless phone  
use is prohibited or when  
it may cause interference  
or danger.  
position as explained in  
the product  
documentation. Do not  
touch the antenna  
unnecessarily.  
ROAD SAFETY COMES FIRST  
Obey all local laws.  
PLAY SAFELY  
Use of vibration can  
Always keep your hands  
free to operate the vehicle  
while driving. Your first  
consideration while  
driving should be road  
safety.  
aggravate injuries. Do not  
turn vibration on if you  
have any ailment in the  
bones or joints of your  
fingers, hands, wrists, or  
arms.  
INTERFERENCE  
All wireless phones may be  
QUALIFIED SERVICE  
Only qualified personnel  
may install or repair this  
product.  
susceptible to  
interference, which could  
affect performance.  
SWITCH OFF IN HOSPITALS  
Follow any restrictions.  
Switch the phone off near  
medical equipment.  
ENHANCEMENTS AND  
BATTERIES  
Use only approved  
enhancements and  
batteries. Do not connect  
incompatible products.  
SWITCH OFF IN AIRCRAFT  
Follow any restrictions.  
Wireless devices can cause  
interference in aircraft.  
WATER-RESISTANCE  
Your phone is not  
water-resistant. Keep it  
dry.  
SWITCH OFF WHEN  
REFUELLING  
Do not use the phone at a  
refuelling point. Do not  
use near fuel or chemicals.  
Copyright © 2006 Nokia. All rights reserved.  
 
vii  
 
BACKUP COPIES  
Remember to make  
back-up copies or keep a  
written record of all  
important information  
stored in your phone.  
When taking and using images or video  
clips, obey all laws and respect local  
customs as well as privacy and  
legitimate rights of others.  
Warning:To use any features  
in this device, other than the  
alarm clock, the device must  
be switched on. Do not  
switch the device on when  
wireless device use may  
CONNECTING TO OTHER  
DEVICES  
When connecting to any  
other device, read its user  
guide for detailed safety  
instructions. Do not  
connect incompatible  
products.  
cause interference or danger.  
Network services  
To use the phone you must have  
EMERGENCY CALLS  
Ensure the phone is  
service from a wireless service provider  
switched on and in service. or network operator. Many of the  
Press the end key as many features in this device depend on  
times as needed to clear  
the display and return to  
standby mode. Enter the  
emergency number, then  
press the call key. Give  
your location. Do not end  
the call until given  
features in the wireless network to  
function. These network services may  
not be available on all networks or you  
may have to make specific  
arrangements with your service  
provider before you can utilise network  
services. Your service provider may  
need to give you additional  
permission to do so.  
instructions for their use and explain  
what charges will apply.  
Some networks may have limitations  
that affect how you can use network  
services. For instance, some networks  
may not support all language-  
About your device  
The wireless device described in this  
guide is approved for use on the CDMA  
800, and 1900, and AMPS networks,  
and also receives signals from the  
global positioning system.  
dependent characters and services.  
Your service provider may have  
requested that certain features be  
disabled or not activated in your  
device. If so, they will not appear on  
your device menu. Your device may  
also have been specially configured.  
This configuration may include  
Contact your service provider for more  
information about networks.  
When using the features in this device,  
obey all laws and respect privacy and  
legitimate rights of others.  
Copyright © 2006 Nokia. All rights reserved.  
viii  
 
       
changes in menu names, menu order  
and icons. Contact your service  
provider for more information.  
This device supports WAP 2.0 protocols  
(HTTP and SSL) that run on TCP/IP  
protocols. Some features of this device,  
such as Mobile web require network  
support for these technologies.  
Shared memory  
The following features in this device  
may share memory: Messaging,  
Contacts, Gallery, Organiser, and  
Extras. Use of one or more of these  
features may reduce the memory  
available for the remaining features  
sharing memory. For example, saving  
many photos to the Gallery may use all  
of the available memory. Your device  
may display a message that the  
memory is full when you try to use a  
shared memory feature. In this case,  
delete some of the information or  
entries stored in the shared memory  
features before continuing. Some of  
the features, such as Messaging and  
Contacts, may have a certain amount  
of memory specially allotted to them in  
addition to the memory shared with  
other features.  
Copyright © 2006 Nokia. All rights reserved.  
 
ix  
 
Welcome  
Congratulations on your purchase of  
this Nokia mobile phone. Your phone  
provides many functions which are  
practical for daily use, such as a hands-  
free loudspeaker, and more.  
Your phone can also connect to a PC,  
laptop, or other device using a USB  
data cable or Bluetooth wireless  
technology.  
Nokia support and contact  
information  
For the latest version of this guide,  
downloads, services and additional  
information related to your  
Nokia product, please visit  
your local Nokia web site.  
Should you still require assistance,  
Getting help  
To check for the nearest Nokia care  
center location for maintenance  
services, you may like to visit  
Find your phone label  
Additional information  
support or your local Nokia Web site  
for the latest version of this guide,  
additional information, downloads,  
and service related to your Nokia  
product.  
If you need help, the Nokia Care  
Contact Center is available for  
assistance. Before calling, we  
recommend that you write down the  
electronic serial number (ESN) of your  
phone and have it available:  
The ESN is found on the type label,  
which is located beneath the battery  
on the back of the phone. See “Remove  
the back cover”, p. 7, and “Remove the  
battery”, p. 7, for more information.  
Copyright © 2006 Nokia. All rights reserved.  
x
 
           
P h o n e a t  
a
g l a n c e  
1. Phone at a glance  
End and power key (9)  
Charger port (10)  
Keys and parts  
Pop-Port connector (11)  
1. Microphone (12)  
Loudspeaker (1)  
P2T key (2)  
Volume control key (3)  
Mini display (4)  
2.5 mm Headset connector (5)  
Standby mode  
Depending on your wireless service  
provider or network operator and the  
model number of your phone, some or  
all of the following selection keys may  
appear in standby mode.  
Earpiece (1)  
Main display (2)  
Left selection key (3)  
Call key (4)  
Keypad (5)  
Selection and scroll key (6)  
Center selection key (7)  
Right selection key (8)  
Copyright © 2006 Nokia. All rights reserved.  
 
1
     
P h o n e a t  
a
g l a n c e  
Scroll up key—Go to the contacts list or  
network operator menu.  
Scroll right key—View the calendar.  
Scroll down key—Go to the contacts  
list.  
Scroll left key—Create a text message.  
Center selection key—Select  
highlighted menus and submenus.  
The standby mode is home base and  
indicates your phone is idle.  
Indicators and icons  
Signal strength (1)—More bars indicate  
a stronger network signal.  
Depending on your wireless service  
provider or network operator and the  
model number of your phone, some or  
all of the following indicators and  
icons may appear in standby mode.  
Menu (2)—Press the center selection  
key to select this option.  
Go to (3)—Press the left selection key  
to select this option.  
You have one or more text or  
picture messages. See “Read  
and reply to text messages”,  
p. 17.  
Names or network operator menu (4)—  
Press the right selection key to select  
this option.  
Battery level (5)—A filled-in battery  
icon indicates a fully charged battery.  
Your phone keypad is locked.  
See “Keyguard”, p. 11  
You have one or more voice  
messages. See “Voice  
messages”, p. 28.  
Quick keys  
Depending on your wireless service  
provider or network operator and the  
model number of your phone, some or  
all of the following scroll key shortcuts  
may be available in standby mode.  
Your phone is set to the silent  
profile. See “Profiles”, p. 44.  
The alarm clock is on.  
See “Alarm clock”, p. 65.  
In standby mode, the four-way scroll  
and center selection keys instantly  
take you to frequently-accessed  
menus:  
The countdown timer is  
running. See “Timers”, p. 73  
The stopwatch timing is  
running in the background.  
See “Stopwatch”, p. 74.  
Copyright © 2006 Nokia. All rights reserved.  
2
 
   
P h o n e a t  
a
g l a n c e  
Integrated hands free or  
loudspeaker is active.  
Note: Some features may not  
be available, depending on  
information, contact your  
wireless provider.  
The timed profile is selected.  
See “Profiles”, p. 44.  
Hearing aid mode is active.  
Bluetooth connectivity is  
enabled.  
Scroll method  
1. In standby mode, to  
select Menu use the  
center selection key.  
Toscroll through the  
main menu, use the  
scroll key.  
or  
set to on or to emergency only.  
, or  
Location sharing is  
,
,
,
An enhancement is connected to the  
phone.  
Phone is roaming outside of  
your home network  
On the right side of the screen, a  
scroll bar is displayed with a tab  
that moves up or down as you  
move through the menus. This  
provides a visual representation of  
your current position in the menu  
structure.  
Phone is in a digital network.  
See “Network services”, p. viii.  
Phone is in an analog network.  
See “Network services”, p. viii.  
Phone is in a 1XRTT network.  
See “Network services”, p. viii.  
2. When you arrive at a menu, select  
Select (the center selection key) to  
enter submenus.  
Phone menus  
Select Back from the submenu  
level to return to the previous  
menu.  
Phone features are grouped according  
to function and are accessed through  
the main menus. Each main menu  
contains submenus and lists from  
which you can select or view items and  
personalise your phone features. You  
can access these menus and submenus  
by using the scroll method or by using  
a shortcut.  
Press the end key to return to  
standby mode from any menu or  
submenu.  
Copyright © 2006 Nokia. All rights reserved.  
 
3
   
P h o n e a t  
a
g l a n c e  
Main menu display  
Security feature  
You can control whether your phone  
main menu is displayed as a List, or  
Grid. By default, the main menu  
displays in Grid format.  
The security feature protects your  
device from unauthorised outgoing  
calls or denies access to stored  
information with a lock or security  
code. The lock code is a four-digit  
number, while the security code is a  
five-digit number. By default, the  
security feature uses the lock code  
(defaulted to the last four digits of  
your phone number) instead of the  
security code to protect your phone.  
In standby mode, select Menu >  
Options > Main menu view > List or  
Grid.  
If supported by your wireless service  
provider or network operator, you can  
also change the order of menus in your  
main menu.  
To access the Security menu, do the  
following:  
In standby mode, select Menu >  
Options > Organise. Highlight a menu,  
select Move. Use the scroll key to move  
the menu to a new location, select OK.  
You can repeat the procedure to  
personalise your main menu.  
1. In standby mode, select Menu >  
Settings > Security.  
2. Enter the lock code, and select OK.  
See “Security”, p. 58 for more  
information.  
In-phone help  
Note: Depending on your  
wireless service provider or  
network operator, the preset  
lock code may be 1234 or  
0000 instead of the last four  
digits of your phone number.  
If none of these work, contact  
your wireless service provider  
or network operator for more  
help.  
Many features have brief descriptions  
(help text) that can be viewed on the  
display. To view these descriptions,  
scroll to a feature, and wait for about  
15 seconds. Scroll down to view all of  
the description, or select Back to exit.  
In order to view the descriptions, you  
must activate help text. See “Help text  
activation”, p. 52.  
To restore the factory settings, do the  
following:  
1. In standby mode, select Menu >  
Settings > Restore settings.  
2. Enter the lock code, and select OK.  
Copyright © 2006 Nokia. All rights reserved.  
4
 
       
P h o n e a t  
a
g l a n c e  
Note: Depending on your  
wireless service provider or  
network operator, your phone  
may ask for the security code  
(default setting of 12345 or  
00000) instead of the lock  
code.  
Organise functions  
In standby mode, select Go to >  
Options > Organise. Highlight an  
option, select Move. Scroll to move the  
option to a new location, and select  
OK. You can repeat the procedure to  
personalise your Go to menu.  
Select Done > Yes to save the changes.  
Go to functions  
The Go to menu allows you to change  
the function of the left selection key  
on your phone so that your most  
frequently used functions can be  
quickly accessed from the Go to menu  
in standby mode.  
Select options  
1. In standby mode, select Go to >  
Options > Select options.  
2. Scroll to the options you want to  
add.  
3. Select Mark to add an option or  
Unmark to remove an option.  
4. Select Done when you have added  
all desired options.  
5. Select Yes to save the changes.  
6. In standby mode, select Go to to  
display a list of the options that  
you selected in step 3.  
Copyright © 2006 Nokia. All rights reserved.  
 
5
     
S e t u p y o u r p h o n e  
2. Set up your phone  
Antenna  
Your device has an  
internal antenna and  
an external antenna  
that works when fully  
extended.  
Note: As  
with any  
other radio  
transmitting  
device, do  
not touch  
the antenna  
unnecessaril  
y when the  
device is  
switched on. Contact with the  
antenna affects call quality  
and may cause the device to  
operate at a higher power  
level than otherwise needed.  
Avoiding contact with the  
antenna area when operating  
the device optimises the  
antenna performance and the  
battery life.  
Hold the device as  
you would any  
other telephone  
with the antenna  
area pointed up  
and over your  
shoulder.  
Copyright © 2006 Nokia. All rights reserved.  
6
 
   
S e t u p y o u r p h o n e  
Remove the battery  
Battery  
Always switch off the power and  
disconnect the charger before  
removing the battery. Avoid touching  
electronic components while changing  
the covers. Always store and use the  
device with the covers attached.  
After you have removed the back  
cover, insert your finger into the finger  
grip, and lift the battery from its  
compartment.  
Prolonged, continuous use of your  
device may increase the device  
temperature. The increased  
temperature is a normal function of  
this product and does not pose a safety  
concern for you or the device. If the  
temperature is uncomfortable to you,  
use a headset or allow your device to  
return to room temperature before  
your next call.  
UIM (CDMA SIM) card slot  
Your phone has a built-in UIM card  
slot. However, the UIM is not  
functional in this phone model.  
Avoid placing anything into the UIM  
card slot.  
Remove the back cover  
Replace the battery  
1. Insert the battery, gold-coloured  
contact end first, into the battery  
slot.  
1. With the back of the phone facing  
you, press down and hold the back  
cover latch.  
2. Push down on the other end of the  
battery to snap the battery into  
place.  
2. Slide the back cover toward the  
bottom of the phone, lift up and  
remove.  
Copyright © 2006 Nokia. All rights reserved.  
 
7
         
S e t u p y o u r p h o n e  
minutes before the charging  
indicator appears on the display or  
before any calls can be made.  
Replace the back cover  
Turn your phone on  
or off  
1. Set the back cover on the phone  
with the cover tabs aligned with  
the slots in the phone.  
2. Press the back cover latch down,  
and slide the back cover toward the  
top of phone.  
1. To turn your phone on or off, press  
and hold the end key for at least  
3 seconds.  
3. Make sure back cover latch is  
secure.  
2. Enter the lock code, if necessary,  
Charge the battery  
and select OK.  
Connect the headset  
1. Plug the charger transformer into a  
standard ac outlet.  
2. Insert the charger output plug into  
the round jack at the bottom of the  
phone.  
If necessary, you can use a CA-44  
adapter cable (1) to connect a  
charger and the phone.  
A compatible headset, such as HS-5,  
may be purchased with your phone or  
separately as an enhancement.  
See “Enhancement settings”, p. 57 for  
information.  
After a few seconds, the battery  
indicator in the display scrolls.  
If the battery is completely  
discharged, it may take a few  
Copyright © 2006 Nokia. All rights reserved.  
8
 
       
S e t u p y o u r p h o n e  
1. Plug the headset connector into  
the Pop-Port™ connector at the  
bottom of your phone.  
Use the save contact option  
1. In standby mode, enter the phone  
and select Save, enter a name for  
the contact, and select OK.  
appears on the display.  
2. Position the headset on your ear.  
With the headset connected, you can  
make, answer, and end calls as usual.  
2. To make the call, press the call key.  
To return to standby mode, select  
Done.  
Use the keypad to enter numbers.  
Press the call key to place a call.  
Press the end key to end a call.  
Use the contacts list  
1. In standby mode, scroll down to  
You can also plug a compatible  
headset, such as the such as the HS-9  
Universal Headset, into the into the  
2.5-mm headset jack on the side of  
your phone to allow hands-free  
operation. See “Enhancement  
settings”, p. 57.  
display your contacts.  
2. Scroll to the contact you wish to  
dial,and press the call key. To view  
details of the entry, select Details.  
Use the last dialled number  
1. In standby mode, press the call key  
to display the last 30 numbers  
dialled.  
Warning: When you use the  
headset, your ability to hear  
outside sounds may be  
affected. Do not use the  
headset where it can  
2. Scroll to the number or name you  
wish to redial, and press the call  
key.  
endanger your safety.  
Make calls  
Make a conference call  
Conference calling is a network service  
Using the keypad  
that allows you to take part in a  
1. Enter the phone number (including conference call with two other  
the area code), and press the call  
key. To delete a character to the  
left of the cursor, select Clear.  
participants.  
1. Make a call to the first participant.  
2. With the first participant on the  
2. To end the call, press the end key.  
To cancel the call attempt, select  
End call.  
line, select Options > Add new call.  
Copyright © 2006 Nokia. All rights reserved.  
 
9
           
S e t u p y o u r p h o n e  
3. Enter the phone number of the  
When adjusting the volume, a bar  
second participant; or, to retrieve a chart appears in the display indicating  
number from your contacts, select  
Search and the number you want  
to call.  
the volume level.  
Answer a call with the  
keypad locked  
4. Press the call key. The first  
participant is put on hold.  
To answer a call with the keypad  
5. When the second participant picks locked, simply press the call key.  
up, press the call key to connect  
the calls.  
During the call, all features function as  
normal. When you end or reject the  
6. To end the conference call, select  
call, the keypad automatically relocks.  
Options > End all calls, or press the See “Keyguard”, p. 11 for details.  
end key.  
When the device is locked, calls may be  
possible to the official emergency  
number programmed into your device.  
Answer calls  
Answer or silence an  
incoming call  
Use the loudspeaker  
Warning: Do not hold the  
1. To answer the call, press the call  
device near your ear when  
the loudspeaker is in use  
because the volume may be  
extremely loud.  
key or select Answer.  
2. To reject the call, press the end key.  
Select Silence to mute the ringing  
tone. Select Dismiss or do nothing,  
and the call is eventually  
You can use your phone loudspeaker  
during a call:  
forwarded to voice mail.  
To activate the loudspeaker, select  
Loudsp.  
If your phone is set to Silent in the  
Profiles menu, select Dismiss, and  
the call is forwarded to voice mail.  
To deactivate the loudspeaker,  
select Normal.  
The loudspeaker is deactivated  
Adjust the earpiece volume automatically when a call or a call  
attempt ends or when certain  
enhancements are connected.  
Press the up arrow or down arrow on  
the volume key located on the right  
side of your phone to adjust the  
volume of the earpiece.  
Copyright © 2006 Nokia. All rights reserved.  
10  
 
           
S e t u p y o u r p h o n e  
Mute phone during call  
To mute your phone during a call,  
select Mute; to unmute the phone,  
select Unmute.  
Keyguard  
With keyguard, you can lock the  
keypad to prevent keys from being  
pressed accidentally. Remember to  
accidental calls or activation of  
features. If the keypad is locked, it  
unlocks when you receive a call.  
After the call, the lock automatically  
reactivates.  
Options during a call  
Many of the options that you can use  
during a call, are network services.  
Check with your wireless service  
provider or network operator for more  
information.  
When the keyguard is on, calls may be  
possible to the official emergency  
number programmed into your device.  
During a call, select Options and one of  
the following:  
If the phone is closed, open it. When  
the phone is open:  
Loudspeaker or Normal—Activate or  
deactivate the loudspeaker while in a  
call.  
To unlock the keypad, select  
Unlock, and press * within 2  
seconds.  
Add new call—Initiate a conference  
call. See “Make a conference call”, p. 9  
for information.  
To lock the keypad, select Menu,  
and press * within 2 seconds.  
Save—Save a number entered during a  
call.  
Add to contact—Add a number entered  
during a call to a contact in your list.  
End all calls—Disconnect from all  
active calls.  
DTMF tones—Enter the numbers, and  
select Tones to send the numbers as  
tones.  
Contacts—View the contacts list.  
Menu—View the phone menu.  
Copyright © 2006 Nokia. All rights reserved.  
 
11  
     
T e x t e n t r y  
3. Text entry  
You can use two methods for entering  
text and numbers: standard mode and  
predictive text mode.  
Numbers (123)  
To switch to 123 mode from Abc mode,  
press and hold # at any message entry  
screen to open the Editor settings.  
Select Number mode, and the device  
returns to the message entry screen  
and switches the ABC icon in the upper  
left corner of the display to the 123  
icon (or back). To return to Abc mode,  
press and hold #.  
Standard mode  
Standard mode is the only way to enter  
text into the contacts list, and to  
rename caller groups.  
Text (Abc)  
Press a key once to insert the first  
letter on the key, twice for the  
second letter, etc. If you pause  
briefly, the last letter in the display  
is accepted and your phone awaits  
the next entry.  
Punctuation and special  
characters  
While at any text entry screen, press *  
to display special characters (press and  
hold * if predictive text is on). Press *  
again to cycle through all available  
characters. Scroll to navigate through  
the list of special characters. Once a  
character is highlighted, select Insert  
to insert the character into your  
message.  
Press 0 to enter a space, thereby  
accepting a completed word.  
Press 1 as many times as necessary  
to scroll through a list of commonly  
used characters.  
Press * to display a complete list of  
special characters.  
Predictive text mode  
Press and hold # to open Editor  
settings, and select Number mode,  
Prediction on or Prediction off.  
Predictive text input allows you to  
write messages quickly using your  
keypad and the built-in dictionary. It is  
much faster than the standard mode  
method, because for each letter, you  
only press the corresponding key on  
your keypad once.  
Copyright © 2006 Nokia. All rights reserved.  
12  
 
           
T e x t e n t r y  
Press and hold the specific number  
key to enter a number.  
Activate and deactivate  
Activate and deactivate  
Press and hold # to open Editor  
settings, and select Number mode,  
Prediction on or Prediction off.  
At any text entry screen, select and  
hold Options to turn predictive text on  
or off depending on previous mode, or  
select Options > Predictive text >  
Prediction on or Prediction off. Press #  
twice to change from predictive text  
mode to standard mode and back.  
Change case and  
mode  
Press # to switch between uppercase,  
lowercase, and sentence case, as well  
as standard and predictive text modes.  
Case and mode are indicated by the  
following icons that appear in the  
upper left of the display screen.  
Enter text  
The illustration below simulates your  
display each time a key is pressed.  
For example, to write Nokia with  
predictive text on and with the English  
dictionary selected, press each of the  
following keys once:  
Uppercase text: standard  
mode is on.  
Lowercasetext: standard  
mode is on.  
6
6
5
4
2
Sentence case text:  
standard mode is on.  
Only available at the beginning of a  
sentence.  
Press 0 to enter a space and begin  
writing the next word.  
If a displayed word is not correct,  
press * to see other matches. To  
return to the previous word in the  
list of matches, select Prev.  
Uppercase text:  
predictive text is on.  
Lowercase text:  
predictive text is on.  
If ? appears after a word, it is not in  
the dictionary. Select Spell to add  
the word to the dictionary.  
Sentence case text:  
predictive text is on.  
Only available at the beginning of a  
sentence.  
Press 1 to insert a period into your  
message.  
Press and hold * to display special  
characters. Press * again to cycle  
through all available characters.  
Copyright © 2006 Nokia. All rights reserved.  
 
13  
     
T e x t e n t r y  
Delete text  
To delete text, use one of the following  
options:  
Select Clear to backspace the  
cursor and delete a character.  
Select and hold Clear to backspace  
continuously and delete  
characters.  
Copyright © 2006 Nokia. All rights reserved.  
14  
 
 
M e s s a g i n g  
4. Messaging  
Your phone is capable of creating and  
receiving text, multimedia, voice and  
minibrowser messages. Check with  
your service provider to see what  
messaging is available for you.  
Note: When sending  
messages, your device may  
display Message sent. This is  
an indication that the message  
has been sent by your device  
to the message center number  
programmed into your device.  
This is not an indication that  
the message has been received  
at the intended destination.  
For more details about  
Text messages  
Text messaging is a network service.  
See “Network services”, p. viii, for more  
information. If your wireless service  
provider or network operator supports  
this feature, you can send and receive  
text messages to compatible phones  
that are also subscribed to the service.  
messagingservices, check with  
your service provider.  
Text message folders and  
options  
In standby mode, select Menu >  
Messaging > Text messages and from  
the following:  
When composing text messages, check  
the number of characters allowed in  
the top right corner of the message.  
Using special (unicode) characters  
takes up more space. If there are  
special characters in your message, the Create message—Create and send  
indicator may not show the message  
length correctly. Before the message is  
sent, the phone will tell you if the  
message exceeds the maximum length  
allowed for one message. Also, you can  
make distribution lists that contain  
phone numbers and names from your  
contact list. See “Distribution lists”,  
p. 27 for more information.  
messages.  
Inbox—Check for received text  
messages. Text messages are  
automatically stored in the Inbox when  
they are received. A notification  
appears when a message arrives in the  
Inbox.  
Copyright © 2006 Nokia. All rights reserved.  
 
15  
     
M e s s a g i n g  
Outbox—Check for outgoing text  
messages. Text messages are  
automatically stored in the Outbox as  
they are sent. If your service is  
interrupted while sending, the text  
message is stored in the Outbox until  
another delivery attempt is made.  
To go quickly to the Create  
message screen, scroll left in  
standby mode.  
2. Compose a text message using the  
keypad. See “Choose a text  
message option”, p. 17, for options  
in composition.  
Sent items—Sent text messages are  
stored in Sent items.  
3. Select Send to > Recently used,  
Send to number, Send to e-mail,  
Send to many, or Send to  
distribution list (if you have created  
one).  
Drafts—View the list of messages saved  
for additional work.  
Archive—View the list of saved  
messages for later reference.  
4. Select a number or distribution list,  
enter the recipient’s phone number  
or e-mail address, or select Search  
to retrieve a number or e-mail  
address from your contacts list;  
select Send.  
Templates—Select from a collection of  
prewritten Templates, when creating  
text messages. Preloaded Templates  
can be edited and personalised.  
My folders—Create and name personal  
folders.  
Use a template  
Delete messages—Delete messages  
Templates are short, prewritten  
messages that can be retrieved and  
inserted into new text messages.  
from a selected folder or all folders.  
Message settings—Change settings to  
read, write, and send text messages.  
1. In standby mode, select Menu >  
Messaging > Text messages >  
Create message > Options > Use  
template.  
Send numeric page—Send a message  
with a number to which to return a  
call.  
2. Select one of the available  
templates, and use the keypad to  
complete the text message.  
Write and send text  
messages  
1. In standby mode, select Menu >  
Messaging > Text messages >  
Create message.  
Copyright © 2006 Nokia. All rights reserved.  
16  
 
   
M e s s a g i n g  
Clear text—Erase all text from your  
message.  
Read and reply to text  
messages  
When you receive a text message,  
a notification appears and the  
Styles > Font type, Font size, orText  
alignment, —Select how your message  
is displayed.  
unopened letter icon (  
displayed.  
) is  
Insert contact—Insert detail from your  
contacts list into your message.  
1. Select Show to read the text  
message or Exit to dismiss the  
notification.  
Insert number—Insert a phone number  
or find a phone number in the contacts  
list.  
Scroll to view the whole message,  
if necessary.  
Save—Save the message in Drafts.  
When unopened messages are in  
Exit editor—Exit the message editor.  
your inbox,  
upper left corner in standby mode  
as a reminder.  
is shown in the  
Use template—Insert a predefined  
template.  
Insert smiley—Insert a smiley.  
2. Select Reply > Empty screen,  
Original text, Template, or one of  
the predefined answers provided.  
Predictive text —Turn predictive text  
on or off, and select the language used  
for predictive text.  
3. Compose your reply with the  
Insert word or Edit word—Enter or edit  
the text of a new word that might not  
appear in the predictive text  
dictionary. This is displayed only when  
predictive text is on.  
keypad, and select Send.  
Choose a text message  
option  
Insert symbol—Insert a special  
character. This is displayed only when  
predictive text is on.  
Create message options  
When you create or reply to a text  
message, depending on the mode of  
text input you use and the features  
supported by your wireless service  
provider or network operator, some or  
all of the following are available:  
Read message options  
When you read a text message, the  
following options are available:  
Delete—Discard the text message.  
Sending optionsMark or Unmark a  
message as Urgent, Delivery note,  
Callback no., or Signature.  
Copyright © 2006 Nokia. All rights reserved.  
 
17  
   
M e s s a g i n g  
Use detail > Number, E-mail address,  
or Web address—Select Save to create  
a new contact; select Options > Add to  
contact, Send message, or Call for  
other options. See “Save other details”,  
p. 35, to create and save details for a  
new contact.  
Add folder to create an additional  
custom folder.  
2. Enter a name for the new folder,  
and select OK.  
Rename a custom folder  
1. In standby mode, select Menu >  
Messaging > Text messages > My  
folders.  
Move—Save the message to Archive,  
Templates, or a folder you have  
created.  
2. Scroll to the folder you wish to  
rename, and select Options >  
Rename folder.  
Forward—Forward the text message to  
another phone number.  
3. Select and hold Clear to delete the  
existing entry; enter a new name  
for the folder; select OK to confirm  
or Back to exit.  
Lock or Unlock—Lock or unlock the text  
message. The appropriate option  
appears.  
Rename—Edit the title of the text  
message.  
Delete a custom folder  
Only folders in My folders can be  
deleted. The Inbox, Outbox, Sent items,  
Drafts, Archive, and Templates folders  
are protected. When you delete a  
folder, all messages in the folder are  
also deleted.  
Use custom folders  
Your phone has a folder system that  
saves and stores text messages.  
Additionally you can create custom  
folders.  
1. In standby mode, select Menu >  
Messaging > Text messages > My  
folders.  
Create a custom folder  
To organise your messages, create  
custom folders, and save messages you  
want to keep there.  
2. Scroll to the folder you wish to  
delete, and select Options > Delete  
folder.  
1. In standby mode, select Menu >  
Messaging > Text messages > My  
folders > Add fold. to create your  
initial custom folder.  
3. Select Yes to delete or No to exit.  
Select Menu > Messaging > Text  
messages >Myfolders >Options >  
Copyright © 2006 Nokia. All rights reserved.  
18  
 
 
M e s s a g i n g  
2. If you select All or All read, select  
Mark or Unmark to choose the  
folders from which to delete text  
messages. Select Options > Mark  
all to choose all folders.  
Delete text messages  
If your message memory is full and you  
have more text messages waiting at  
the network,  
blinks in standby  
mode. You can do the following:  
3. Select Done after choosing the  
Read some of the unread text  
messages, and delete them.  
folders.  
4. Select Yes to delete the message or  
Delete text messages from some of  
your folders.  
No to exit.  
Delete a single text message  
To delete a single text message, you  
must open it.  
Text message settings  
Sending options  
In standby mode, select Menu >  
Messaging > Text messages >  
Message settings > Sending options.  
Highlight the setting or settings you  
wish to change:  
1. In standby mode, select Menu >  
Messaging > Text messages.  
2. Select the folder containing the  
text message you wish to delete.  
3. Select the message you wish to  
Priority > Normal or Urgent—the  
priority of the message  
delete and Options > Delete.  
4. Select Yes to delete the message or  
Delivery note—to receive a note  
confirming delivery of a text message.  
No to exit.  
Send callback number > On—to send  
your default phone to the recipient  
Delete all messages in a folder  
1. In standby mode, select Menu >  
Messaging > Text messages >  
Delete messages and one of the  
following:  
Signature—to append a signature to an  
outgoing text message. If you have not  
created a signature, select On; enter a  
signature, and select OK.  
All—Deletes all text messages in  
the folder.  
Other settings  
In standby mode, select Menu >  
Messaging > Text messages >  
All read—Deletes only the read text  
messages in the folder.  
All unread—Deletes all unread text Message settings > Other settings and  
messages in the Inbox. the setting you wish to change:  
Copyright © 2006 Nokia. All rights reserved.  
 
19  
   
M e s s a g i n g  
Message font size—Select the desired  
font size for the display.  
may not be able to receive the  
message.  
Messageoverwriting >Sentitemsonly,  
Inbox only, S. items & Inbox, orOff—Set  
your phone to automatically replace  
old messages in Inbox or Sent items  
when new ones arrive. When the  
message memory is full, your phone  
cannot send or receive any new  
messages.  
Note: Only devices that have  
compatible features can  
receive and display  
multimedia messages.  
The appearance of a message  
may vary depending on the  
receiving device. The wireless  
multimedia messages. If the  
inserted picture exceeds this  
limit, the device may make it  
smaller so that it can be sent  
by multimedia message.  
Save sent messages—Select Always  
save or Always prompt to save sent  
text messages to Sent items. Select Off  
to not save messages.  
Queue msgs when digital unavailable—  
Select On or On prompt to store text  
messages in the Outbox until they can  
be sent with a digital service. Select  
Off to not store messages.  
Depending upon your network, you  
may receive a message that includes  
an Internet address where you can go  
to view the multimedia message.  
Pictures are scaled to fit the display  
area of the phone. Your phone has a  
multimedia message viewer for playing  
messages and a multimedia inbox for  
storing saved messages. Once you save  
the multimedia message, you can use  
the image as a screen saver or the  
sound as a ringing tone.  
Multimedia messages  
Multimedia messaging is a network  
service. See “Network services”, p. viii,  
for more information. If your wireless  
service provider or network operator  
supports this feature, you can send and  
receive multimedia messages to  
compatible phones that are also  
subscribed to the service.  
Copyright protections may prevent  
some images, ringing tones, and other  
content from being copied, modified,  
transferred, or forwarded.  
A multimedia message can contain  
text, sound, a picture, or a video clip.  
Your phone supports multimedia  
messages that are up to 600 KB. If the  
maximum size is exceeded, the phone  
Multimedia messaging only supports  
the following formats:  
Picture: JPEG, GIF, animated GIF,  
WBMP, BMP, and PNG  
Copyright © 2006 Nokia. All rights reserved.  
20  
 
 
M e s s a g i n g  
Sound: MP3, eAAC+, SP-MIDI,  
AMR audio, QCELP, and  
monophonic ringing tones  
Outbox until another delivery attempt  
is made.  
Sent items—Sent multimedia messages  
are stored in Sent items.  
Video: clips in H.264 format with  
QCIF image size  
Saved items—Save multimedia  
You cannot receive multimedia  
messages if you have a call in progress,  
games or other applications running,  
or an active browsing session. Because  
delivery of multimedia messages can  
fail for a variety of reasons, do not rely  
solely upon them for essential  
messages for later use in Saved items.  
Delete messages—Delete multimedia  
messages from the Inbox, Outbox, Sent  
items, or Saved items.  
Message settings—Change the settings  
for multimedia messages.  
communications.  
Write and send multimedia  
messages  
1. In standby mode, select Menu >  
Messaging > Multimedia msgs. >  
Create Message.  
Multimedia message folders  
and options  
In standby mode, select Menu >  
Messaging > Multimedia messages.  
and from the following:  
2. Compose a message using the  
keypad. See “Choose a multimedia  
message option”, p. 23 for  
composing options.  
Create message—Create and send  
multimedia messages.  
Inbox—Check for received multimedia  
messages. Multimedia messages are  
automatically stored in the Inbox when  
they are received. You receive a  
notification when a message arrives in  
your Inbox.  
3. Select Send to > Recently used, To  
phone number, To e-mail address,  
To many, or Distribution lists.  
4. Select a number or distribution list,  
and enter the recipient’s phone  
number or email address; or select  
Search to retrieve a number or e-  
mail address from your contacts  
list.  
Outbox—Check for outgoing  
multimedia messages. Multimedia  
messages are automatically stored in  
the Outbox as they are sent. If your  
service is interrupted while sending,  
then messages are stored in the  
5. Select Send.  
The multimedia message is moved to  
the Outbox for sending.  
Copyright © 2006 Nokia. All rights reserved.  
 
21  
     
M e s s a g i n g  
The wireless network may limit the size See “Multimedia message settings”,  
of multimedia messages. If the inserted p. 25. This is not an indication that the  
picture exceeds this limit, the device  
may make it smaller so that it can be  
sent by multimedia messaging.  
message has been received at the  
intended destination.  
It takes more time to send a  
Read and reply to  
multimedia messages  
When a multimedia message is  
multimedia message than to send a  
text message. While the multimedia  
message is being sent, the animated  
received,  
appears in the display  
indicator  
is displayed and you  
along with the percentage display  
indicating the download progress.  
Once the message has been fully  
can use other functions on the phone.  
If there is an interruption while the  
message is being sent, the phone  
automatically tries to resend it a few  
times. If this fails, the message remains  
in the Outbox and you can try to  
manually resend it later. Check your  
Outbox for unsent messages.  
downloaded,  
and a notification  
appears in the display.  
1. To view the multimedia message  
immediately, select Show.  
To save the message to the inbox  
for later viewing, select Exit.  
Note: When sending  
To view a saved message, select  
Menu > Messaging > Multimedia  
msgs. > Inbox and the message you  
want to view.  
messages, your device may  
display the words Multimedia  
message sent. This is an  
indication that the message  
has been sent by your device  
to the message center number  
programmed into your device.  
This is not an indication that  
the message has been  
received at the intended  
destination. For more details  
about messaging services,  
check with your service  
provider.  
While viewing a message, select  
Play to play the entire message  
2. Select Reply or Options > Reply to  
all, and compose your reply.  
3. Select Send.  
If  
blinks and Multimedia  
memory full. View waiting message.  
appears, the memory for multimedia  
messages is full. To view the waiting  
message, select Show. Before you can  
save the message, you need to delete  
some of your old messages. See “Delete  
Messages that you send are saved in  
Sent items if the setting Save sent  
messages is set to Yes.  
Copyright © 2006 Nokia. All rights reserved.  
22  
 
 
M e s s a g i n g  
multimedia messages”, p. 25 for more  
information.  
Insert > New sound clip—Opens the  
voice recorder to create a new sound  
clip that you attach to the message.  
Important: Exercise caution  
when opening messages.  
Multimedia message objects  
may contain malicious  
software or otherwise be  
harmful to your device or PC.  
Insert > Slide—Insert a slide into your  
message. Each slide can contain text,  
business card, calendar note, one  
image, and one sound clip.  
Insert > Business card—Insert contact  
as a business card.  
Choose a multimedia  
message option  
Insert > Calendar note—Insert a  
calendar note.  
Delete > Image, Sound clip, or Video  
clip—Delete an image, sound clip, or  
video clip file from your message. Only  
appears when your message has a file  
attachment.  
Create message options  
When you create or reply to a  
multimedia message, depending on the  
mode of text input you are using and  
the features supported by your wireless  
service provider or network operator,  
some or all of the following options are  
available:  
Delete > Slide—Delete the current slide  
from your message.  
Edit subject—Edit the subject heading.  
Send to album—Send message to an  
online album. This is an online network  
service. Check with your service  
provider for more information.  
Clear text—Erases all text from the  
current slide in your message.  
Preview—Preview the message or slide  
presentation before sending it. Select  
Stop to end the preview. Select Play to  
start the preview again or Back to  
return to the list of options.  
Insert > Image, Sound clip, or Video  
clip—Insert an image, sound clip,  
or video clip file from your Gallery.  
Open the desired folder, and select the  
file and Options > Insert.  
Previous slide—Move to the previous  
slide. Option only appears if there is a  
previous slide.  
Copyright protections may prevent  
some images, ringing tones, and other  
content from being copied, modified,  
transferred, or forwarded.  
Next slide—Move to the next slide.  
Option only appears if there is a next  
slide.  
Copyright © 2006 Nokia. All rights reserved.  
 
23  
   
M e s s a g i n g  
Slide list—Shows a list of all slides.  
Select the slide you wish to edit.  
you want to use. This appears only  
when predictive text is on.  
Slide timing—Set the timing interval  
for each slide. By default, each slide  
appears for 12 seconds.  
Read message options  
When you read a multimedia message,  
the following options are available:  
Place text first or Place text last—Move  
text to the top or bottom of the slide.  
By default, the text appears at the  
bottom or last.  
Set contrast—Adjust the contrast of an  
image. This option is only available  
when viewing an image.  
Details—Displays the details of a  
highlighted file attachment.  
Save—Saves the message to Saved  
items.  
Save image, Save sound clip, or Save  
video clip—Save the corresponding file  
to the Gallery. Images, sound clips, and  
video clips must be opened before you  
can save them.  
More options > Insert contact—Insert a  
name from your contacts list into your  
message.  
More options > Insert number—Insert a  
phone number or find a phone number  
in the contacts list.  
Save link—Save the corresponding Web  
link. This appears only when a Web link  
is highlighted.  
More options—Shows the details of  
your multimedia message.  
View text—View only the text included  
Exit editor—Exits the message editor.  
in the message.  
Insert smiley—Insert a smiley.  
Activate image, Activate tone, or  
Activate video clip—View or listen to  
the corresponding file.  
Insert word or Edit word—Enter or edit  
the text of a new word that might not  
appear in the predictive text  
Open business card—Open an attached  
dictionary. This appears only when  
predictive text is on.  
business card.  
Open calendar note—Open an attached  
Insert symbol—Insert a special  
character. This appears only when  
predictive text is on.  
calendar note.  
Delete—Delete the message you are  
viewing.  
Prediction on or Prediction off—Turn  
predictive text on or off.  
Reply or Reply to all—Enter a reply and  
send it to the original sender and any  
other recipients of the message.  
Matches—View matches found in the  
predictive text dictionary for the word  
Copyright © 2006 Nokia. All rights reserved.  
24  
 
M e s s a g i n g  
Use detail—Use a corresponding  
3. Select the message you wish to  
number or e-mail address. The number  
or e-mail address must be highlighted  
delete and Options > Delete.  
4. Select Yes to delete or No to exit.  
Forward > Recently used, To phone  
number, To e-mail address, or To  
many—Forward the message to a  
phone number, to an e-mail address, or  
to multiple recipients.  
Delete all multimedia  
messages in a folder  
1. In standby mode, select Menu >  
Messaging > Multimedia msgs. >  
Delete messages > Inbox, Outbox,  
Sent items, or Saved items.  
Album—Forward the message to an  
online album. This is an online network  
service. Check with your service  
provider for more information.  
2. Select Yes to delete the all  
messages in the folder or No to  
exit.  
Delete multimedia  
messages  
Multimedia message  
settings  
If your message memory is full and you  
have more multimedia messages  
Save sent messages  
waiting at the network,  
standby mode. You can do the  
following:  
blinks in You can save the multimedia messages  
that you send to the Sent items folder.  
In standby mode, select Menu >  
Read some of the unread  
Messaging > Multimedia msgs. >  
multimedia messages, and delete  
them.  
Message settings > Save sent  
messages > No or Yes.  
Delete multimedia messages from  
some of your folders.  
Delivery reports  
You can request delivery reports to  
inform you if a message is delivered.  
Delete a single multimedia  
message  
In standby mode, select Menu >  
To delete a single multimedia message, Messaging > Multimedia msgs. >  
you need to open it first.  
Message settings > Delivery reports >  
On or Off  
1. In standby mode, select Menu >  
Messaging > Multimedia msgs.  
Scale image down  
You can request for images to be  
automatically scaled down.  
2. Select the folder containing the  
multimedia message you wish to  
delete.  
Copyright © 2006 Nokia. All rights reserved.  
 
25  
   
M e s s a g i n g  
In standby mode, select Menu >  
Messaging > Multimedia msgs. >  
Message settings > Scale image  
down > Yes or No.  
In home network—Allow incoming  
messages only if you are in the service  
provider’s home system. This is a  
network service. Check with your  
service provider for more information.  
Default slide timing  
You can set the default time in mm:ss  
No—Block all incoming messages.  
for the slides of a multimedia message.  
Incoming multimedia  
messages  
In standby mode, select Menu >  
Messaging > Multimedia msgs. >  
Message settings > Default slide  
timing, enter a slide time, and select  
OK.  
You can set how your phone retrieves  
incoming multimedia messages.  
In standby mode, select Menu >  
Messaging > Multimedia msgs. >  
Message settings > Incoming multim.  
msgs. and one of the following:  
Allow multimedia reception  
Before you can use the multimedia  
message feature, you must specify  
whether you want to receive message  
at all times or only if you are in the  
service provider’s home system. This is  
a network service. Check with your  
service provider for more information.  
Retrieve—Sets the phone to  
automatically retrieve all multimedia  
messages. When new messages arrive,  
you are notified that a multimedia  
message is received. If you choose to  
automatically retrieve messages, you  
can select Show to read the  
The default setting of the multimedia  
message service is generally on.  
The appearance of a multimedia  
message may vary depending on the  
receiving device.  
multimedia message or Exit to view  
them in your inbox later.  
Retrieve manually—Choose the  
messages you wish to retrieve.  
When new messages arrive, you are  
notified that a multimedia message is  
available for retrieval. If you select to  
manually retrieve messages, select  
Show to open the message  
notification, then Retrieve. Select Exit  
to save the notification to your inbox,  
and retrieve the message later.  
You can choose to receive all  
messages, to block all messages, or to  
receive messages only when you are in  
the service provider’s home network.  
In standby mode, select Menu >  
Messaging > Multimedia msgs. >  
Message settings > Allow multimedia  
recept. and one of the following:  
Yes—Allow all incoming messages.  
Copyright © 2006 Nokia. All rights reserved.  
26  
 
M e s s a g i n g  
Reject—Sets the phone to reject  
multimedia messages.  
A distribution list only contains phone  
numbers of recipients.  
Allow or block advertisements  
Allows you to block advertisements.  
This setting is not available if  
Add and remove contacts  
To add contacts, select Menu >  
Messaging > Text messages >  
multimedia reception is blocked.  
Distribution lists > the list of choices >  
Add new. Add the contacts one by one.  
From standby mode, select Menu >  
Messaging > Multimedia msgs. >  
Message settings > Allow  
To remove contacts, select Menu >  
Messaging > Text messages >  
advertisements > Yes or No.  
Distribution lists > the list of choices >  
Options, and remove the contact name.  
This is a network service. Check with  
your service provider for more  
information.  
Use distribution lists  
1. In standby mode, select Menu >  
Distribution lists  
Distribution lists allow you to send  
messages to a designated group of  
people.  
Messaging > Distribution lists.  
2. Scroll to the list you wish to  
modify; select Options and one of  
the following:  
Create new list—Create a new  
distribution list.  
Create distribution lists  
1. In standby mode, select Menu >  
Messaging > Distribution lists >  
New list.  
Send message—Send message to  
the distribution list.  
Rename list—Rename the  
distribution list.  
If you create a second distribution  
list, select Menu > Messaging >  
Distribution lists > Options >  
Create new list.  
Clear list—Clear the distribution list  
of all current contacts.  
2. Enter a name for the list, and select  
Delete list—Delete the distribution  
OK.  
list.  
3. To add a contact to this list, select  
Add new, and add the contacts one  
by one.  
Copyright © 2006 Nokia. All rights reserved.  
 
27  
       
M e s s a g i n g  
Listen to your voice mail  
After you set up voice mail, you can  
dial the number in one of four ways:  
Voice messages  
If you subscribe to voice mail, your  
wireless provider will furnish you with  
a voice mailbox number. You need to  
save this number to your phone to use  
voice mail. When you receive a voice  
message, your phone will beep, display  
a message, or both. If you receive more  
than one message, your phone shows  
the number of messages received.  
Dial the number.  
Press and hold 1.  
Select Listen if there is a  
notification on the display.  
In standby mode, select Menu >  
Messaging > Voice messages >  
Listen to voice messages.  
Save voice mailbox number When you connect and the  
prerecorded greeting begins, follow  
the automated instructions to listen to  
your voice messages.  
Your wireless provider may have  
already saved your voice mailbox  
number to your phone. If so, the  
number will appear in the display in  
step 2. Select OK to leave the number  
unchanged.  
Automate voice mail  
Voice mail services vary by service  
provider. The following instructions are  
examples of common operations.  
Please check with your service provider  
for specific instructions for using your  
voice mail service.  
1. In standby mode, select Menu >  
Messaging > Voice messages >  
Voice mailbox number.  
2. If the number is not displayed or  
incorrect, enter your voice mailbox  
area code and number.  
Write down number and  
process  
3. Select OK.  
1. Write down your voice mailbox  
number.  
Call and set up your  
voice mail  
2. Call and check your voice mail as  
you normally would.  
After you save the voice mailbox, in  
standby mode, press and hold 1. When  
you connect to voice mail and the  
prerecorded greeting begins, follow  
the automated instructions to set up  
your voice mail.  
3. Write down your interaction with  
therecordedprompts step-by-step.  
Note that each voice mail service  
may vary. Your steps may resemble  
the following:  
Copyright © 2006 Nokia. All rights reserved.  
28  
 
           
M e s s a g i n g  
Dial 2745551212, pause 5 seconds, To dial and listen to your voice mail,  
press 1, pause 2 seconds, press  
1234, and press *.  
press and hold the assigned speed dials  
key in standby mode.  
Be precise; you will need this  
information in “Set up voice mail with  
dialling codes”, p. 29.  
Minibrowser messaging is a network  
service. See “Network services”, p. viii,  
for more information.  
Set up voice mail with  
dialling codes  
1. In standby mode, select Menu >  
Contacts > Speed dials.  
Important: Exercise caution  
when opening messages.  
E-mail messages may contain  
otherwise be harmful to your  
device or PC.  
2. Scroll to an empty speed dials slot,  
and select Assign.  
3. Enter your voice mailbox number,  
including the area code.  
4. Refer to dialling codes, and enter  
any codes as necessary. Use the  
information that you saved from  
Write down number and process”,  
p. 28.  
If your wireless service provider or  
network operator supports this feature,  
you can check for e-mail messages  
using the minibrowser. In standby  
mode, select Menu > Messaging >  
Minibrowser messages > Connect.  
For example, if you pause for 5  
seconds after connecting to voice  
mail, enter p twice after the voice  
mailbox number, for example,  
2145551212pp. For more  
See “Minibrowser”, p. 77 for more  
information on using your phone to  
access web pages.  
information on dialling codes see  
Insert dialling codes”, p. 34.  
5. Enter any remaining pauses or  
other information that allows you  
to listen to your messages, and  
select OK.  
6. Enter a name (such as voice mail),  
and select OK.  
Copyright © 2006 Nokia. All rights reserved.  
 
29  
   
L o g  
5. Log  
Log stores information about the last  
30 missed, 30 received, or 30 dialled  
calls. It also adds the total duration of  
all calls. When the number of calls  
exceed the maximum, the most recent  
call replaces the oldest.  
View missed calls  
Missed calls are calls that were never  
answered. The missed calls feature  
does not function when your phone is  
switched off.  
1. In standby mode, select Menu >  
Log > Missed calls; if a missed call  
notification appears, select List.  
Whether viewing missed, received, or  
dialled calls, the menu options are the  
same:  
2. Scroll to a name or number, select  
Time of call—Display the date and time  
of the call.  
Options and a menu option.  
Send message—Send a message to the  
number.  
View received calls  
Received calls are calls that have been  
answered.  
Use number—Edit the number and  
associate a name with the number.  
1. In standby mode, select Menu >  
Save—Enter a name for the number  
and save it to your contacts list.  
Log > Received calls.  
2. Scroll to a name or number, select  
Add to contact—Add the number to an  
existing name in your contacts list, if  
the number is not associated with a  
name.  
Options and a menu option.  
View dialled numbers  
Dialled calls are numbers you have  
previously dialled from your phone:  
Delete—Clear the number from  
memory.  
1. In standby mode, press the call key;  
or select Menu > Log > Dialled  
numbers.  
Call—Call the number.  
2. Scroll to a name or number, select  
Options and a menu option.  
Copyright © 2006 Nokia. All rights reserved.  
30  
 
       
L o g  
View Message  
Call duration  
Recipients  
Note: The actual invoice for  
calls and services from your  
service provider may vary,  
depending on network  
You can view recipients of messages  
you have sent.  
features, rounding off for  
billing, taxes and so forth.  
Time of call  
You can make or receive up to five calls  
to or from the same number and view  
the time each call occurred. Your clock  
must be set for this feature to work  
accurately.  
You can view the duration of your  
calls. In standby mode, select Menu >  
Log > Call duration and one of the  
following options:  
Last call duration—Check the time of  
your last call.  
1. While viewing a missed, received,  
or dialled call, select Options >  
Time of call.  
Dialled calls' duration—Check the  
combined time of calls you dialled for  
either Home or Roaming.  
2. Scroll down to view the most  
recent call times from this number.  
Received calls' duration—Check the  
combined time of calls you received for  
either Home or Roaming.  
3. Select Back to return to the options  
list.  
All calls' duration—Check the  
combined time of all calls.  
Use other options  
Useful options exist when viewing a  
missed, received, or dialled call. Select  
Options > Time of call, Send message,  
Use number, Save, Add to contact,  
Delete, or Call.  
Life timer—Check the total airtime  
minutes logged on your phone.  
Clear timers—Enter your lock code, and  
select OK to clear all timers on your  
phone.  
Note: Some timers, including  
the life timer, may be reset  
during service or software  
upgrades.  
Clear log lists  
You can delete any missed, dialled, or  
received calls from phone memory.  
In standby mode, select Menu > Log >  
Clear log lists > All call lists, Missed  
calls, Received calls, Dialled numbers,  
or Message recipients.  
Copyright © 2006 Nokia. All rights reserved.  
 
31  
         
L o g  
Data or fax calls  
Duration of  
minibrowser calls  
Data/fax calls are a network service.  
See “Network services”, p. viii, for more  
information. If your wireless service  
provider or network operator supports  
this feature, you can view the size or  
duration of sent or received data and  
fax calls.  
Minibrowser is a network service.  
See “Network services”, p. viii, for more  
information. If your wireless service  
provider or network operator supports  
this feature, you can view the size or  
duration of sent or received data from  
the minibrowser.  
Note: The actual invoice for  
calls and services from your  
service provider may vary,  
depending on network  
features, rounding off for  
billing, taxes and so forth.  
Note: The actual invoice for  
calls and services from your  
service provider may vary,  
depending on network  
features, rounding off for  
billing, taxes and so forth.  
In standby mode, select Menu > Log >  
Data/fax calls and one of the following  
options:  
In standby mode, select Menu > Log >  
Minibrowser calls and one of the  
following options:  
Last sent data/fax—View the size (KB)  
of the last sent data or fax call.  
Last sent browser data—View the size  
(KB) of the last send browser data.  
Last received data/fax—View the size  
(KB) of the last received data or  
fax call.  
Last rcvd. browser data—View the size  
(KB) of the last received data.  
All sent data/fax—View the size (KB) of  
All sent browser data—View the size  
all sent data and fax calls.  
(KB) of all sent browser data.  
All received data/fax—View the size  
All received browser data—View the  
(KB) of all received data and fax calls.  
size (KB) of all received browser data.  
Last data/fax’s duration—View the  
duration time of the last data or  
fax call.  
Last browser session—View the  
duration time of the last browser  
session.  
All data/fax calls’ duration—View the  
All browser sessions—View the  
duration time of all calls.  
duration time of all browser sessions.  
Clear all data/fax registers—Select Yes  
Clear all browser logs—Select OK > Yes  
to clear all data and fax registers.  
to clear all browser logs.  
Copyright © 2006 Nokia. All rights reserved.  
32  
 
   
C o n t a c t s  
6. Contacts  
The contacts list can hold up to 500  
contacts with multiple numbers and  
text notes for each contact.  
The amount of numbers and text  
entries that you can save may vary,  
depending on length and the total  
number of entries in the contacts list.  
View contacts  
In standby mode, select Menu >  
Contacts > Names, or scroll down to  
see your current list of contacts. While  
viewing your contact list, you can  
select Details for the contact  
information or Options and one of the  
following:  
In standby mode, select Menu >  
Contacts and from the following  
options:  
Search—Search your contacts.  
Add new—Add a new contact.  
Names—Display the list of contacts  
currently on your phone.  
Add new group—Add a new caller  
group.  
Settings—Change your contact  
settings.  
Delete contact—Delete the highlighted  
contact.  
Groups—Assign contacts to caller  
groups.  
To make a call, highlight a phone  
number for a contact, and select Call.  
Voice tags—Assign voice commands to  
phone numbers.  
Search contacts  
Speed dials—Assign specific keys to  
In standby mode, select Menu >  
Contacts >Names >Options >Search.  
Enter the first character of the contact  
name, and highlight the contact you  
wish to view.  
phone numbers.  
My number—Show the current number  
assigned to the phone.  
Delete all contacts—Delete all contacts  
on your phone.  
If the right selection key on your phone  
is Names, you can select Names >  
Options > Search in standby mode.  
To quickly access your contacts scroll  
up or down while in standby mode.  
Copyright © 2006 Nokia. All rights reserved.  
 
33  
     
C o n t a c t s  
instruct the receiving system to pause,  
wait, bypass, or accept the numbers  
that follow them in the dialling string.  
Add new contacts  
Save a name and number  
1. In standby mode, enter the phone  
Automate voice mail with dialling  
codes. For more information, see  
Automate voice mail”, p. 28.  
number you wish to save.  
2. Select Save.  
Press * repeatedly to cycle through  
dialling codes. When the desired code  
is displayed, pause briefly, and the  
code is inserted into the dialling string.  
3. Enter the name, and select OK >  
Done.  
When you enter a number, you can  
select Options > Insert pause ('p') to  
insert a pause code or Options > Insert  
wait ('w') to insert a wait code.  
See “Insert dialling codes”, p. 34, for  
more information.  
The following dialling codes are  
available:  
Dialling Indicates...  
code  
*
Bypasses a set of  
instructions.  
Save a number (only)  
In standby mode, enter the phone  
number you wish to save, and select  
and hold Options.  
+
Causes the international  
access code to be replaced  
by +.  
Pauses for 2.5 seconds  
before sending any numbers  
that follow.  
p
Save a contact  
1. In standby mode, select Menu >  
Contacts > Names > Options >  
Add new.  
w
Waits for you to press the  
call key before sending the  
numbers or codes that  
follow.  
2. Enter the name, and select OK.  
3. Enter the phone number, and select  
Save multiple numbers  
OK.  
You can save different types of phone  
numbers per contact. The first number  
you save for any entry is automatically  
set as the default, but the default  
number can always be changed.  
Insert dialling codes  
Insert special characters called dialling  
codes into phone numbers such as  
voice mail, and save the number to a  
Speed dials location. Dialling codes  
Copyright © 2006 Nokia. All rights reserved.  
34  
 
           
C o n t a c t s  
1. In standby mode, scroll down to  
display your list of contacts.  
3. Select Details > Options > Add  
detail > Image to save an image  
from the gallery or Tone to select  
the default tone or a new tone  
from the gallery.  
2. Select the contact to which you  
want to add a phone number.  
3. Select Details > Options > Add  
detail > Number > General,  
Mobile, Home, Office, or Fax.  
Change default number  
To change the default number for an  
existing contact.  
4. Enter the phone number, and select  
OK.  
1. In standby mode, scroll down to  
display your list of contacts.  
If you want to change the number  
type, highlight the number, and select  
Details > Options > Change type >  
General, Mobile, Home, Office, or Fax.  
2. Select the contact for which you  
want to change the default number  
and Details.  
3. Highlight the new default number,  
Save other details  
To add an address or a note to an  
and select Options > Set as default.  
existing contact, do the following:  
Send business cards  
You can send a business card to a  
compatible phone or other handheld  
device.  
1. In standby mode, scroll down to  
display your list of contacts.  
2. Scroll to the contact to which you  
want to add an address or note.  
1. In standby mode, scroll down to  
display your list of contacts.  
3. Select Details > Options > Add  
detail > E-mail address, Web  
2. Select the contact to which you  
want send as a business card and  
Details.  
address, Postal address, or Note.  
4. Enter the text for the note or  
address, and select OK.  
3. Select the number to use and  
Options > Send bus. card > Via  
multimedia, Via text message, or  
Via Bluetooth.  
To associate an image or tone to an  
existing contact, do the following:  
1. In standby mode, scroll down to  
display your list of contacts.  
4. Select Default number or All details  
to send all the personal details that  
have been defined.  
2. Scroll to the contact to which you  
want to add an address or a note.  
Copyright © 2006 Nokia. All rights reserved.  
 
35  
     
C o n t a c t s  
5. Enter the number for your  
recipient, or select Search to  
retrieve a number from your  
contacts; select OK.  
Change image—Change the  
selected image associated with the  
contact.  
Delete contact—Delete the entire  
contact entry from your contacts.  
Edit contacts  
1. In standby mode, scroll down to  
display your list of contacts.  
Delete—Delete the detail from this  
contact.  
Send message—Create and send a  
2. Highlight a contact, select Details.  
text message to the contact.  
3. Highlight the name, number, detail,  
or image you wish to edit, and  
select Options. The type of detail  
you highlight determines your  
selection of options. Choose one of  
the following options:  
Use number—Display the phone  
number, ready for use.  
Set as default—Make the number  
the default for the contact.  
Change type > General, Mobile,  
Home, Office, or Fax—Change the  
number type.  
View—View the phone number of  
the contact.  
Add voice tag—Add a voice tag to  
Add detail > Name—Add a name to  
the contact. This option appears  
only if the contact does not have a  
name.  
the contact.  
Save to gallery—Save the image to  
your Gallery.  
Send bus. card > Via text message,  
Via Bluetooth, or Via multimedia—  
Send the contact as a business card  
to another phone.  
Add detail > Number > General,  
Mobile, Home, Office, or Fax—Add  
a number to the contact.  
Add detail > E-mail address, Web  
address, Postal address, Note,  
Image, or Tone—Add an additional  
detail to the contact.  
Add to group—Add the contact to a  
previously created call group.  
Speed dials—Assign the contact to  
your speed dials list.  
Edit name, Edit number, or Edit  
detail—Edit the detail of the  
contact.  
Copyright © 2006 Nokia. All rights reserved.  
36  
 
 
C o n t a c t s  
Add a contact to a  
caller group  
Modify contact  
settings  
1. In standby mode, scroll down to  
In standby mode, select Menu >  
Contacts > Settings and the setting  
you wish to change:  
display your list of contacts.  
2. Highlight a contact, select Details.  
Scrolling view—Select Normal name  
list, Name and number, Large name list,  
or Name and image view.  
3. Highlight a number, and select  
Options > Add to group and the  
existing caller group to which you  
wish to add the number.  
Memory status—View the amount of  
phone memory used as well as the  
amount of phone memory available.  
Modify a caller group  
In standby mode, select Menu >  
Contacts > Groups > Options > Group  
details and one of the following  
options:  
Set up caller groups  
You can add contacts to caller groups  
that you create and assign a unique  
ringing tone or graphic to each group.  
This enables you to identify callers  
from the group by their unique ringing  
tone or graphic.  
Group name—Rename the group to  
your preference.  
Group ringing tone—Set the ringing  
tone for the group.  
Group image—Turn the graphic for the  
caller group on or off.  
Create a caller group  
You can create a new caller group and  
store a list of contacts in the group.  
Group members—Add or remove  
members from the caller group.  
In standby mode, select Contacts >  
Groups > Options > Add new group;  
enter the name of the new group, and  
press OK.  
Set up voice tags  
Before using voice tags, note the  
following:  
Voice tags are not language-  
dependent. They are dependent on  
the speaker's voice.  
You must say the name exactly as  
you said it when you recorded it.  
Copyright © 2006 Nokia. All rights reserved.  
 
37  
           
C o n t a c t s  
Voice tags are sensitive to  
appears next to the phone numbers  
which have voice tags assigned.  
background noise. Record voice  
tags, and use them in a quiet  
environment.  
Use a voice tag  
1. In standby mode, select and hold  
Very short names are not accepted.  
Use long names, and avoid similar  
names for different numbers.  
Names.  
2. When you hear several beeps and  
Note: Using voice tags may be  
difficult in a noisy  
environment or during an  
emergency, so you should not  
rely solely upon voice dialling  
in all circumstances.  
Speak now appears, release the key.  
3. Pronounce the voice tag clearly  
into the microphone.  
When the phone finds the voice  
tag, a notification appears, and the  
phone automatically dials the  
number. If the phone does not  
locate a number or recognise the  
voice tag, No match found appears.  
Assign a voice tag  
To use voice dialling, you must first  
assign a voice tag to a number.  
1. In standby mode, scroll down to  
your list of contacts.  
Play back a voice tag  
1. In standby mode, select Menu >  
2. Highlight a contact, and select  
Contacts > Voice tags.  
Details.  
2. Scroll to the voice tag you want to  
3. Highlight the number you want to  
assign a voice tag, and select  
Options > Add voice tag.  
play back, and select Playback.  
Modify a voice tag  
1. In standby mode, select Menu >  
4. Select Start, then speak clearly into  
the microphone. Do not select Quit  
unless you want to cancel the  
recording.  
Contacts > Voice tags.  
2. Scroll to the voice tag you want to  
change, and select Change.  
5. After you finish speaking, the  
phone automatically stops  
recording, saves, and replays the  
voice tag.  
3. Select Start, and speak clearly into  
the microphone. The phone repeats  
your voice tag, and Voice tag  
changed appears.  
Copyright © 2006 Nokia. All rights reserved.  
38  
 
       
C o n t a c t s  
Delete a voice tag  
Change speed dial numbers  
1. In standby mode, select Menu >  
1. In standby mode, select Menu >  
Contacts > Voice tags.  
Contacts > Speed dials.  
2. Scroll to the voice tag you want to  
delete, and select Delete. Delete  
voice tag? appears.  
2. Scroll to the Speed dials entry you  
wish to change, and select  
Options > Change.  
3. Select Yes to erase the voice tag.  
3. Enter the new number, or select  
Search to retrieve a number from  
your contacts; select OK.  
Set up speed dials  
4. If necessary, enter the contact  
name for the number, and select  
OK to change the key assignment.  
You can associate any entry in your  
contacts with a key from 2 to 9; to dial  
those entries, press and hold the  
assigned key.  
Delete speed dial numbers  
1. In standby mode, select Menu >  
Assign a key to speed dials  
1. In standby mode, select Menu >  
Contacts > Speed dials.  
Contacts > Speed dials.  
2. Scroll to the Speed dials location  
you wish to delete.  
2. Scroll to any empty slot, and select  
Assign.  
3. Select Options > Delete > Yes to  
delete the key assignment.  
3. Enter the number (including the  
area code), and select OK; or select  
Search to retrieve a number from  
your contacts.  
Display phone  
number  
4. If necessary, enter the contact  
name for the number, and select  
OK.  
In standby mode, select Menu >  
Contacts > My number to display your  
phone number.  
If Speed dials is off, the phone displays  
a prompt asking if you want to activate  
Speed dials. Select Yes to activate  
Speed dials.  
Copyright © 2006 Nokia. All rights reserved.  
 
39  
           
C o n t a c t s  
Delete contacts  
Delete individual contacts  
1. In standby mode, scroll down to  
display your list of contacts.  
2. Highlight a contact, and select  
Options > Delete contact > Yes or  
No.  
Delete all contacts  
1. In standby mode, select Menu >  
Contacts > Delete all contacts >  
Yes.  
2. Enter your lock code, and press OK.  
See “Security”, p. 58 for more  
information.  
Copyright © 2006 Nokia. All rights reserved.  
40  
 
     
G a l l e r y  
7. Gallery  
You can save pictures, video clips,  
recordings, music files, and ringing  
Your phone has about 12 MB of  
memory for storing files in the Gallery.  
tones to folders in the Gallery, and add This memory is not shared with other  
new folders to the ones already there.  
To download images and tones, use  
multimedia messaging, text  
messaging, mobile Internet sites, or  
Nokia PC Suite.  
functions, such as contacts. If the  
phone displays a message that the  
memory is full, delete some existing  
files before proceeding.  
Your phone supports a digital rights  
management system to protect  
content that you have acquired.  
A piece of content, such as a ringing  
tone, can be protected and associated  
with certain usage rules, for example,  
the number of usage times or a certain  
usage period. The rules are defined in  
the content activation key that can be  
delivered with the content or  
Open a folder  
In standby mode, select Menu >  
Gallery to view the folder system.  
The phone folder system includes:  
Images—By default, received pictures  
are saved to this folder.  
Video clips—By default, received video  
clips are saved to this folder.  
Music files—By default, music files are  
separately, depending on the service  
provider. You may be able to update  
these activation keys. Always check  
the delivery terms of any content and  
activation key before acquiring them,  
as they may be subject to a fee.  
saved to this folder.  
Themes—A set of themes included with  
your phone are stored here.  
Graphics—A set of graphics included  
with your phone are stored here.  
Tones—A set of ringing tones included  
with your phone are stored here.  
Copyright protection may prevent  
some images, ringing tones, and other  
content from being copied, modified,  
transferred, or forwarded.  
Recordings—By default, voice  
recordings are saved to this folder.  
Received files—Files sent directly to  
your phone are stored here.  
Copyright © 2006 Nokia. All rights reserved.  
 
41  
   
G a l l e r y  
Your folders—Folders you create  
appear after the preset folders.  
Activation key list—View the list of  
available activation keys. You can  
delete activation keys if desired.  
To open a folder, highlight the folder,  
and select Open. Once you open the  
folder list and highlight a file, you can  
access the file or the options  
Mark or Mark all—Allows you to mark  
Gallery folders to be moved into  
another folder. This function only  
applies to folders you have created.  
associated with that specific file type.  
Other options appear depending on the  
type of files that exist in the folders.  
Gallery options  
In standby mode, select Menu >  
Gallery > Options and one of the  
following:  
Delete folder—Delete a folder you have  
created. You cannot delete a preset  
folder.  
Move—Move the selected folder into  
another folder. After selecting Move,  
highlight another folder, and select  
Move to. You cannot move a preset  
folder.  
Rename folder—Rename a folder you  
have created. You cannot rename a  
preset folder.  
Details—Show the name, size, and date  
of creation of the selected folder.  
Type of view—Choose whether to view  
the folders as a list with details, list  
only or a grid.  
Sort—Sort the contents of the selected  
folder by name, date, format, or size.  
Add folder—Create a new folder.  
Memory status—Check the available  
memory for the phone handset.  
Copyright © 2006 Nokia. All rights reserved.  
42  
 
 
M e d i a  
8. Media  
These options are only available during  
the current recording session.  
Recorder  
Voice recorder allows you to make a  
short (up to 3 minutes) recording and  
save it to the Recordings folder or  
another folder in the Gallery.  
The recorder cannot be used when a  
data call is active.  
Recording list  
1. In standby mode, select Menu >  
Media > Recorder > Recordings  
list.  
2. Navigate through the Recordings  
folder, and select a recording you  
want to modify.  
Record speech or sound  
1. In standby mode, select Menu >  
Media > Recorder.  
3. Select Open to open and play the  
recording, or select Options to use  
the Gallery options.  
2. To start the recording, select the  
red record virtual button.  
3. Hold the phone in the normal  
position near your ear, and record  
your message.  
4. When you are finished recording,  
select the green stop virtual  
button.  
The recording is given a default name  
and saved to the Recordings list.  
The default location of the Recordings  
list is the Recordings folder in the  
Gallery.  
After you have made a recording,  
select Play last recorded to replay the  
recording and Send last recorded > Via  
Bluetooth, or Via multimedia to send  
the recording to a compatible phone.  
Copyright © 2006 Nokia. All rights reserved.  
 
43  
       
S e t t i n g s  
9. Settings  
Use the Settings menu to change  
profiles, display settings, themes, tone  
settings, time and date settings, call  
settings, phone settings, voice  
commands, connectivity,  
enhancements, security settings,  
application settings, network settings,  
network services, restore factory  
settings, and view phone details.  
Activate a profile  
In standby mode, select Menu >  
Settings > Profiles > General, Silent,  
Meeting, Outdoor, or custom profile >  
Activate.  
Personalise a profile  
To modify a profile, in standby mode,  
select Menu > Settings > Profiles >  
General, Silent, Meeting, Outdoor, or  
custom profile > Personalise > and a  
profile option. You cannot rename the  
General profile. To personalise profile  
tones, see “Tones”, p. 46.  
Profiles  
Profiles define how your phone reacts  
when you receive a call or message,  
how your keypad sounds when you  
press a key, and more. Ringing options,  
keypad tones, and other settings for  
each of the available profiles can be  
left at their default setting, or  
Set a timed profile  
Timed profiles can be used to prevent  
missed calls. For example, suppose you  
attend an event that requires your  
phone be set to Silent before the event  
starts, but you forget to return it to  
General until long after the event.  
A timed profile can prevent missed  
calls by returning your phone to the  
default profile at a time you specify.  
personalised to suit your needs.  
The following profiles are available:  
General, Silent, Meeting, Outdoor, and  
two customisable profiles.  
Profiles are also available for  
enhancements such as a headset and  
car kit. See “Enhancement settings”,  
p. 57.  
Copyright © 2006 Nokia. All rights reserved.  
44  
 
         
S e t t i n g s  
To set a timed profile, do the following: mode settings > Wallpaper and one of  
the following:  
1. In standby mode, select Menu >  
Settings > Profiles > General,  
Silent, Meeting, Outdoor, or  
custom profile > Timed.  
On—Activate wallpaper on your phone.  
Off—Deactivate wallpaper on your  
phone.  
2. Enter the time for the profile to  
Image—Choose an image from the  
Gallery for wallpaper. Select Open to  
browse the Images folder. Select the  
image of your choice for the wallpaper.  
expire, and select OK.  
Timed profiles can be set up to 24  
hours in advance.  
Font colour  
Display  
To set font colour of your phone when  
in standby mode, in standby mode,  
select Menu > Settings > Main  
display > Standby mode settings >  
Standby mode font colour. Scroll to  
select a colour from the colour grid.  
Your phone has two displays: a main  
display inside the cover and a mini  
display outside the cover.  
Power saver  
When this feature is enabled, the  
display shows only a simplified display  
after a time-out period. In standby  
mode, select Menu > Settings > Main  
display or Mini display > Power saver >  
On or Off  
Screen saver  
You can choose a screen saver for the  
main display. In standby mode, select  
Menu > Settings > Main display >  
Screen saver and one of the following:  
On—Activate screen saver on your  
Standby mode settings  
phone.  
You can choose settings for the display  
of the standby screen on the main  
display.  
Off—Deactivate screen saver on your  
phone.  
Screen savers > Image, Video Clip,  
Slide set, or Digital clock—Choose an  
image, video clip or other option to act  
as your screen saver.  
Wallpaper  
You can set either an Image or a Slide  
set as wallpaper for the phone display.  
Time-out—Modify the idle time before  
the screen saver activates.  
In standby mode, select Menu >  
Settings > Main display > Standby  
Copyright © 2006 Nokia. All rights reserved.  
 
45  
           
S e t t i n g s  
Note: Power saver is  
Themes  
automatically activated after  
the time-out of the screen  
saver to optimise battery life.  
Themes allows you to personalise the  
ringtone, screensaver and background  
on your phone.In standby mode, select  
Menu > Settings > Themes > Select  
theme and a theme of your choice.  
Banner  
If your wireless service provider or  
networkoperator supports thisfeature,  
you can choose whether the display  
shows the operator logo or a custom  
banner, when the phone is in standby  
mode. In standby mode, select Menu >  
Settings > Main display > Banner >  
Default or Personalise.  
Tones  
You can adjust the ringing volume,  
keypad tones, and more for the active  
profile. In standby mode, select  
Menu > Settings > Tones and one of  
the following:  
Incoming call alert—Select how your  
phone will alert you when there is an  
incoming call: Ringing, Ascending,  
Ring once, Beep once, Off.  
Sleep mode  
Sleep mode is a power-saving feature  
that turns the phone display off during  
inactivity. You can activate the sleep  
mode feature on your phone. In  
standby mode, select Menu >  
Ringing tone—Select Open Gallery >  
Tones to select the ringing tone for  
incoming calls.  
Incoming call video > Off or Incoming  
call video—Select a video clip to be  
displayed when you receive an  
incoming call.  
Settings > Main display or Mini  
display > Sleep mode > On or Off.  
When Sleep mode is activated the  
display is completely blank. A blinking  
LED indicator shows that the phone is  
still on.  
Ringing volume—Use the left and right  
scroll keys to set the volume of your  
ringing tone.  
Vibrating alert—Activate the vibrating  
call alert. Select On to activate the  
vibrating alert.  
Backlight time-out  
You can control the time-out of the  
backlight on your phone. In standby  
mode, select Menu > Settings > Main  
display > Backlight time-out.  
Message alert tone—Select the alert  
tone for incoming messages: Off,  
Standard, Special, Beep once, Long &  
loud, Ringing tone.  
Copyright © 2006 Nokia. All rights reserved.  
46  
 
           
S e t t i n g s  
Keypad tones—Scroll to set the volume include Daylight savings time, so add  
of your keypad tones (or turn them off). or subtract accordingly.  
Warning tones—Turn warning and  
confirmation tones on or off  
Change the format  
In standby mode, select Menu >  
Alert for—Set the phone to alert only  
when a member of a selected caller  
group calls. See “Set up caller groups”,  
p. 37 for more information.  
Settings > Time and date > Clock >  
Time format > 24-hour or 12-hour.  
Date  
Show or hide the date  
In standby mode, select Menu >  
Settings > Time and date > Date >  
Show date or Hide date.  
Time and date  
Clock  
Show or hide the clock  
In standby mode, select Menu >  
Settings > Time and date > Clock >  
Show clock or Hide clock.  
Set the date  
In standby mode, select Menu >  
Settings > Time and date > Date > Set  
the date, enter the date, and select OK.  
Set the time  
Change the format  
1. In standby mode, select Menu >  
Settings > Time and date > Clock >  
Set the time.  
1. In standby mode, select Menu >  
Settings > Time and date > Date >  
Date format and the format of your  
choice.  
2. Enter the time (in hh:mm format),  
and select OK.  
2. With Date displayed, select Date  
separator and the separator of your  
choice.  
3. Select am or pm (this option is  
displayed only when 12-hour  
format is in use).  
Auto-update of date  
and time  
Auto-update is a network service.  
See “Network services”, p. viii, for more  
information.  
Change the time zone  
In standby mode, select Menu >  
Settings > Time and date > Clock >  
Time zone and your time zone based on  
Greenwich Mean Time (GMT), plus or  
minus hours in your time zone.  
If your wireless service provider or  
network operator supports this feature,  
you can allow the digital network to  
For example, GMT-8 is US Pacific time  
in Los Angeles, CA. GMT does not  
Copyright © 2006 Nokia. All rights reserved.  
 
47  
             
S e t t i n g s  
set the clock, which is useful when you  
are out of your home area (for  
example, when you have travelled to  
another network or time zone).  
Automatic redial  
Occasionally, your network may  
experience heavy traffic, resulting in a  
fast busy signal when you dial. With  
automatic redial activated, your phone  
redials the number, and notifies you  
once the network is available.  
In standby mode, select Menu >  
Settings > Time and date > Auto-  
update of date & time > On, Confirm  
first, or Off.  
In standby mode, select Menu >  
Settings > Call > Automatic redial >  
On or Off.  
If you use the Auto-update of date &  
time option while outside your digital  
network, you may be prompted to  
enter the time manually. Network time  
will replace the time and date when  
you re-enter your digital network.  
Speed dials  
To activate or deactivate Speed  
dialling, in standby mode, select  
Menu > Settings > Call > Speed  
dialling > On or Off. For more  
information on Speed dialling, see “Set  
up speed dials”, p. 39.  
You may be prompted to enter the time  
manually, if the battery is removed or  
discharged while you are outside the  
digital network and the battery is  
installed or recharged while you are  
still outside of the digital network.  
Answer when fold is opened  
Set your phone to answer a call when  
you open the slide. If the setting is off,  
you must press the call key after you  
open the slide.  
Call  
Anykey answer  
When Anykey answer is on, briefly  
press any key except the right selection  
or end key to answer a call. In standby  
mode, select Menu > Settings > Call >  
Anykey answer > On or Off.  
In standby mode, select Menu >  
Settings > Call > Answer when fold is  
opened > On or Off.  
Copyright © 2006 Nokia. All rights reserved.  
48  
 
         
5. Enter the required information  
Calling cards  
(access number or prefix and card  
number), and select OK to confirm  
your entries.  
If you use a calling card for long  
distance calls, save the calling card  
number in your phone. The phone can  
store up to four calling cards. Contact  
your calling card company for more  
information.  
6. Select Card name > enter the card  
name > OK.  
Select a calling card  
You can select one of the calling cards  
for which you have saved information.  
The selected card information is used  
when you make a card call.  
Save information  
1. In standby mode, select Menu >  
Settings > Call > Calling card.  
2. Enter your security code, and select  
1. In standby mode, select Menu >  
OK. See “Security”, p. 58.  
Settings > Call > Calling card.  
3. Scroll to the calling card of your  
choice, and select Options > Edit >  
Select > Dialling Sequence.  
2. Enter your security code, and select  
OK. See “Security”, p. 58.  
3. Scroll to the calling card of your  
choice, and select it.  
4. Select one of the following  
sequence types:  
Access no.+phone no.+card no.—  
Dial the access number for the  
calling card, the phone number,  
then enter the card number (plus  
PIN if required).  
Make card calls  
After you have selected a calling card,  
make a card call.  
1. Enter the phone number, including  
any prefix (such as 0or 1) that your  
calling card may require when you  
make a calling card call. See your  
calling card for instructions.  
Access no.+card no.+phone no.—  
Dial the access number for the  
calling card, card number (plus PIN  
if required), then enter the phone  
number.  
2. Press and hold the send key for a  
few seconds until Card call is  
displayed.  
Prefix+phone no.+card no.—Dial  
the prefix (numbers that must  
precede the phone number) and  
phone number, then enter the card  
number (plus PIN if required).  
3. Follow the instructions on the  
screen.  
4. When you hear the tone or system  
message, select OK.  
Copyright © 2006 Nokia. All rights reserved.  
 
49  
 
S e t t i n g s  
connected. See “Network services”,  
p. viii, for more information.  
International prefix  
If supported by your service provider,  
you can store an international prefix  
into your phone. When you enter + at  
the beginning of a phone number, your  
phone automatically inserts the  
international prefix that you have  
stored.  
For better performance during data  
calls, place the phone on a stationary  
surface. Do not move the phone by  
holding it in your hand during a data  
call.  
For more information on connectivity,  
refer to the PC/PDA Connectivity  
Guide. The PC/PDA Connectivity Guide  
can be downloaded from the Nokia  
Store an international prefix  
1. In standby mode, select Menu >  
Settings > Call > International  
prefix.  
1. In standby mode, select Menu >  
Settings > Call > Data/fax calls >  
Incoming data/fax call and view  
the following options:  
2. Enter the international prefix (for  
example, 011), and select OK.  
Use the international prefix  
In standby mode, press the * key twice  
to bring up the + symbol, and the  
phone number you want to call, for  
example, +33934546789.  
Normal—The phone receives  
incoming calls as usual.  
Data calls only—The phone receives  
only data calls.  
The phone dials the international  
prefix you have stored in your phone  
and the phone number you have  
entered. In the example, the phone  
dials 011.33.9.3454.6789.  
Fax calls only—The phone receives  
only fax calls.  
2. Select Data calls only or Fax calls  
only.  
3. When you are finished receiving  
the fax or data call, repeat steps 1  
and 2, and select Normal.  
Data and fax calls  
Receive data or fax calls  
Data/fax calls.  
View data transfer  
You can view the transmission speed  
when sending or receiving data or fax  
calls. In standby mode, select Menu >  
Settings > Call > Data/fax calls > Data  
rate display > Graphic or Off.  
If your wireless service provider or  
networkoperator supports thisfeature,  
you can set up the phone to send or  
receive data or fax calls when a  
terminal, such as a PDA or PC, is  
Copyright © 2006 Nokia. All rights reserved.  
50  
 
   
S e t t i n g s  
Call summary  
Memory status  
Your phone can display the time spent You can view the memory usage of  
on a call when you hang up. In standby your phone. Some or all of the  
mode, select Menu > Settings > Call > following options are available on your  
Call summary > On or Off.  
phone. In standby mode, select  
Menu > Settings > Phone > Memory  
status and one of the following  
possible options.  
Show call time on display  
Your phone can display the call time  
Free mem.—Shows the amount of  
phone memory available for file  
storage.  
during the phone call. In standby  
mode, select Menu > Settings > Call >  
Show call time on display > On or Off.  
Gallery—Shows the amount of phone  
memory currently used for Gallery.  
Ringing tone for no caller ID  
Applications—Shows the amount of  
phone memory currently used for  
Applications.  
You can select a different ringing tone  
for calls received with no caller ID. In  
standby mode, select Menu >  
Settings > Call > Ringing tone for no  
caller ID > On or Off. See “Personalise a  
profile”, p. 44 for more information on  
selecting a ringing tone.  
Automatic keyguard  
Automatic keyguard allows you to  
automatically lock your phone after a  
defined time. In standby mode, select  
Menu > Settings > Phone > Automatic  
keyguard > On or Off.  
Phone  
Language settings  
Phone language allows you set the  
language of the display text seen on  
the phone. In standby mode, select  
Menu > Settings > Phone > Phone  
language and the language of your  
choice.  
Navigation key  
If supported by your wireless service  
provider or network operator, you can  
set the features that are activated  
when you press the scroll key.  
1. In standby mode, select Menu >  
Settings > Phone > Navigation key.  
2. Highlight the scroll up, scroll down,  
scroll right, or scroll left arrow;  
select Change.  
Copyright © 2006 Nokia. All rights reserved.  
 
51  
               
S e t t i n g s  
3. Select a function to assign to the  
action.  
DTMF tone length > Short (0.1  
seconds) or Long (0.5 seconds).  
DTMF tones  
Start-up tone  
DTMF tones are the tones that sound  
If the Start-up tone is activated, the  
when you press the keys on your phone tone sounds when you turn on your  
keypad. You can use DTMF tones for phone. In standby mode, select  
many automated dial-up services such Menu > Settings > Phone > Start-up  
as banking and airlines or for entering  
your voice mailbox number and  
password.  
tone > On or Off.  
Help text activation  
DTMF tones are sent during an active  
call. You can send them manually from  
your phone keypad, or send them  
automatically by saving them in your  
phone.  
Your phone displays brief descriptions  
for most menu items. When you arrive  
at a feature or menu, pause for about  
15 seconds and wait for the help text  
to display. Scroll to page through the  
full help text, if necessary.  
Set type  
The default setting for help text is on.  
However, you can turn help text on or  
off.  
In standby mode, select Menu >  
Settings > Phone > DTMF tones >  
Manual DTMF tones and one of the  
following:  
In standby mode, select Menu >  
Settings > Phone > Help text  
activation > On or Off.  
Continuous—The tone sounds for as  
long as you press and hold a key.  
Fixed—Use to send tones of the  
duration you specify in the DTMF tone  
length option.  
Voice commands  
You can set up to five Voice commands,  
which allow hands-free operation of  
certain phone features.  
Off—Use to turn off tones. No tones are  
sent when you press a key.  
Set length  
You can specify DTMF tone length  
Add a voice tag  
Before using Voice commands, you  
must first add a voice tag to the phone  
function.  
when using the Fixed option.  
In standby mode, select Menu >  
Settings > Phone > DTMF tones >  
Copyright © 2006 Nokia. All rights reserved.  
52  
 
           
S e t t i n g s  
1. In standby mode, select Menu >  
Voice command options  
Settings > Voice commands.  
You can modify voice command tags.  
In standby mode, select Menu >  
Settings > Voice commands, highlight  
the voice command tag, and select one  
of the following options:  
2. Select a function option you wish  
to tag, and select Add.  
3. Select Start, and speak the voice  
tag clearly into the microphone.  
Playback—Listen to the voice  
command tag.  
Do not select Quit unless you want to  
cancel the recording.  
Options > Change—Change the voice  
The phone replays then saves the  
command tag.  
recorded tag.  
appears next to the  
function option for which you add a  
voice tag.  
Options > Delete—Erase the voice  
command tag.  
Activate a voice command  
Connectivity  
After you have associated a voice  
command tag with a phone function,  
you can issue a command by speaking  
the voice command tag.  
You can also connect the phone to a  
compatible PC using a USB data cable;  
and use the phone as a modem to  
enable connectivity from the PC.  
Remember to make back-up copies of  
important data.  
1. In standby mode, select and hold  
Names.  
For more information, see the Nokia PC  
Suite online help. Nokia PC Suite and  
all related software can be  
2. When Speak now appears,  
pronounce the voice tag clearly  
into the microphone.  
downloaded from the U.S. Mobile  
Phone products section of www.nokia-  
When the phone finds the voice  
command tag, Found: appears, and the  
phone plays the recognised voice  
command tag through the earpiece.  
The function you requested is  
activated.  
Important: only install and  
use applications and other  
software from sources that  
offer adequate security and  
protection against harmful  
software.  
Copyright © 2006 Nokia. All rights reserved.  
 
53  
     
S e t t i n g s  
Dial-up networking profile (DUN)  
Bluetooth connectivity  
Generic object exchange profile  
(GOEP)  
Bluetooth technology connectivity  
enables cost-free wireless connections  
between electronic devices and can be  
used to send and receive images, texts,  
gallery files, voice recordings, video  
clips, notes, business cards, and  
calendar notes. It can also be used to  
connect wirelessly to products that use  
Bluetooth wireless technology, such as  
computers. You can synchronise your  
phone and your PC using Bluetooth  
connectivity.  
Headset profile (HSP)  
Hands-free profile (HFP)  
Generic access profile (GAP)  
Service Discovery Protocol (SDP)  
Serial port profile (SPP)  
To ensure interoperability between  
other devices supporting Bluetooth  
technology, use only enhancements  
approved by Nokia for this model.  
Check with the manufacturers of other  
devices to determine their  
Since devices with Bluetooth  
connectivity communicate using radio  
waves, your phone and the other  
device do not need to be in direct  
line-of-sight.  
compatibility with this device.  
There may be restrictions on using  
Bluetooth technology in some  
locations. Check with your local  
authorities or service provider. If you  
want more information on this  
function, visit the Bluetooth  
The two devices only need to be within  
a maximum of 30 feet (10 meters) of  
each other. The connection can be  
subject to interference from  
obstructions such as walls or other  
electronic devices.  
Technology organisation website:  
The Bluetooth wireless technology  
application whether used actively or in  
the background, consumes the battery  
and reduces the operating time of the  
phone.  
Pairing  
You can set up a permanent  
association (pairing) between your  
phone and another device with  
Bluetooth technology. Some devices  
may require pairing before data  
transfer can take place.  
This device is compliant with  
Bluetooth Specification 1.2 and  
supports the following profiles:  
To pair with a device, you and the  
owner of the other device must agree  
on a pass code of 1–16 numeric  
Object push profile (OPP)  
File transfer profile (FTP)  
Copyright © 2006 Nokia. All rights reserved.  
54  
 
 
S e t t i n g s  
characters. The first time you try to  
connect the devices, you must each  
enter the same pass code. Once the  
devices are paired, you will not need to  
use the pass code again, so there is no  
need to remember it.  
Bluetooth connectivity  
settings  
You can define how your phone is  
shown to other devices with Bluetooth  
connectivity. In standby mode, select  
Menu > Settings > Connectivity >  
Bluetooth > Bluetooth settings and  
one of the following:  
Paired devices are placed in your  
paired device list. You can view the list  
even when Bluetooth connectivity is  
not active or when the devices in the  
list are not available for connection.  
My phone's visibility—Select Shown to  
all to show the phone to all other  
devices with Bluetooth connectivity or  
Hidden to show the phone only to the  
paired devices. Operating the phone in  
hidden mode is a safer way to avoid  
malicious software.  
In standby mode, select Menu >  
Settings > Connectivity > Bluetooth >  
Paired devices > Options and one of  
the following:  
My phone's name—Change your phone  
name that is seen by other users.  
Assign short name—Give a nickname to  
the selected device (visible to you  
only).  
Set up a connection  
1. In standby mode, select Menu >  
Settings > Connectivity >  
Auto-conn. without confirmation—  
Select No, if you want the phone to  
connect to the selected device  
automatically or Yes, if you want the  
phone to ask for your permission first.  
Bluetooth > On. The active  
Bluetooth technology connection  
is indicated by  
display.  
at the top of the  
Delete pairing—Delete the pairing to  
the selected device.  
2. Select Search for audio  
enhancements to search for  
compatible devices with Bluetooth  
connectivity. The list of found  
devices appears in the display.  
Pair new device—Search for active  
devices with Bluetooth technology  
within range, scroll to the desired  
device, and select Pair to establish  
pairing with that device. Do not accept  
Bluetooth connectivity from sources  
you do not trust.  
3. Select the desired device. If  
required, enter the Bluetooth  
connectivity pass code of the  
device to complete the pairing.  
Copyright © 2006 Nokia. All rights reserved.  
 
55  
   
S e t t i n g s  
4. If required, enter the Bluetooth  
connectivity pass code of the  
device to pair with the device.  
transfer, an alarm sounds, and a  
message appears in standby mode.  
To view the transferred item  
immediately from standby mode,  
select Show. To view the item at a later  
time, select Exit.  
Your phone connects to the device.  
You can start data transfer.  
To view the device you are connected  
to, select Menu > Settings >  
Connectivity > Bluetooth > Active  
device.  
Depending on the nature of the item, it  
is saved in the appropriate menu in  
your phone. For example, a business  
card would be saved in Contacts, and a  
calendar note would be saved in  
Calendar.  
To deactivate Bluetooth connectivity,  
select Menu > Settings >  
Connectivity > Bluetooth > Off.  
Deactivation of the Bluetooth  
technology connection will not affect Data cable transfer  
other functions of the phone.  
To transfer data from your phone to a  
compatible PC or from a compatible PC  
to your phone, use a CA-53 USB data  
cable. To disconnect the cable from the  
device, hold the connector, and remove  
the cable.  
Send data  
Instead of using the Connectivity  
menu, you can use other phone menus  
to send various types of data to other  
devices with Bluetooth connectivity.  
For example, you can send a video clip  
from the Video clips folder of the  
Gallery menu. See the appropriate  
sections of the user guide for  
information about sending different  
types of data.  
Important: Disconnect the USB data  
cable from the phone to make a call.  
Enable default mode  
connection  
Connect to your PC in Default mode to  
transfer phone data and files between  
your phone and PC using PC Suite.  
Receive a data transfer  
When a Bluetooth technology  
1. Connect your PC and your phone  
with a CA-53 USB data cable.  
connection is active in your phone, you  
can receive notes, business cards, video  
clips, and other types of data transfers  
from another device with Bluetooth  
connectivity. When you receive a data  
A notification is displayed that asks  
which mode you want to select.  
2. Select Accept > Default mode.  
A notification is displayed stating  
that a connection is active.  
Copyright © 2006 Nokia. All rights reserved.  
56  
 
   
S e t t i n g s  
You can now use PC Suite to connect  
to your phone.  
Enhancement  
settings  
The Enhancement settings menu  
displays the hearing aid compliant  
option by default, but shows other  
options only if the phone is or has been  
connected to a compatible  
Disable data storage  
connection  
1. To disable the USB data cable,  
double-click the green arrow on  
the task bar at the bottom of your  
PC screen.  
enhancement type.  
A window pops up that shows  
Headset  
Unplug or Eject Hardware.  
In standby mode, select Menu >  
Settings > Enhancements > Headset  
2. Click on USB Device in the  
Hardware devices window.  
A popup window shows Stop a  
wish to be automatically activated  
when a headset is connected.  
Hardware device.  
3. Highlight USB device, and click OK.  
The Safe to Remove Hardware  
popup window is displayed with  
the following message “The ‘USB  
Device’ device can now be safely  
removed from the system”.  
Automatic answer—Calls are answered  
automatically after one ring when a  
headset is connected. Select On or Off.  
Handsfree  
In standby mode, select Menu >  
Settings > Enhancements > Handsfree  
and one of the following:  
4. Click OK.  
Data and fax transfer  
You can make data and fax transfers  
during a phone call. For more  
information, see “Data and fax  
transfer”, p. 57.  
Default profile—Choose the profile you  
wish to be automatically activated  
when a car kit is connected.  
Automatic answer—Calls are answered  
automatically after one ring when a  
car kit is connected. Select On or Off.  
Lights—Choose to keep the phone  
lights always on, or to shut off  
automatically after several seconds.  
Select On or Automatic.  
Copyright © 2006 Nokia. All rights reserved.  
 
57  
       
S e t t i n g s  
Lights— Select On or Automatic to  
keep the phone lights always on or to  
shut off automatically after several  
seconds.  
Hearing aid  
A LPS-4 hearing aid accessory allows  
your device to optimise sound quality  
when coupled with a hearing aid that  
is set to T-coil mode.  
Hearing aid  
To optimise sound quality, you can set  
your phone to couple to a T-coil-  
equipped hearing aid.  
In standby mode, select Menu >  
Settings > Enhancements > Hearing  
aid > Use hearing aid > Yes or No.  
If the Hearing aid is connected and  
recognised through the Pop-Port™  
connector, the phone automatically  
uses the Hearing aid.  
In standby mode, select Menu >  
Settings > Enhancements > Hearing  
aid > T-coil hearing aid mode.  
Select On to activate the HAC.  
Verify that the hearing aid is set to  
T-coil mode, and hold the phone  
against the ear.  
TTY/TDD  
Check with the manufacturer of the  
TTY/TDD device for a connecting cable  
that is compatible with your phone.  
Only activate the T-coil hearing aid  
mode when using your device with a  
hearing aid or it may impact the audio  
performance of the device.  
TTY/TDD communications depend on  
network availability. Check with your  
service provider for availability and  
description of services.  
Security  
In standby mode, select Menu >  
Settings > Enhancements > TTY/TDD >  
Use TTY > Yes or No.  
To access Security for the first time,  
you must enter the preset lock code.  
By default, the preset lock code is the  
last four digits of your phone number.  
Depending on your wireless service  
provider or network operator, the  
preset lock code may be a four digit  
number such as 1234 or 0000. If none  
of these work, contact your wireless  
service provider or network operator  
for help.  
Charger  
In standby mode, select Menu >  
Settings > Enhancements > Charger  
and one of the following:  
Default profile—Select the profile you  
want to automatically activate when  
your phone is connected to the  
charger.  
Copyright © 2006 Nokia. All rights reserved.  
58  
 
         
S e t t i n g s  
If you select Lock now, you must enter  
your lock code before the phone will  
function normally. After the lock code  
is accepted, your phone functions  
normally.  
Phone lock  
The phone lock feature protects your  
phone from unauthorised outgoing  
calls or unauthorised access to  
information stored in the phone.  
When phone lock is activated,  
Phone locked is displayed each time  
you turn your phone on.  
Call not allowed appears if you attempt  
to place a call while your phone is  
locked.  
To answer a call with phone lock on,  
select Answer, or press the call key.  
By default, the preset lock code is the  
last four digits of your phone number.  
Depending on your wireless service  
provider or network operator, the  
preset lock code may be a four-digit  
number such as 1234 or 0000. If none  
of these work, contact your wireless  
service provider or network operator  
for help.  
Allowed number when  
phone locked  
With phone lock on, the only outgoing  
calls you can make are to the  
emergency number programmed into  
your phone (for example, 111) and the  
numbers stored in the Allowed no.  
when phone locked location.  
When the device is locked, you can still  
call the official emergency number  
programmed into your phone.  
1. In standby mode, select Menu >  
1. In standby mode, select Menu >  
Settings > Security.  
Settings > Security.  
2. Enter the lock code, and select OK.  
2. Enter the lock code, and select OK.  
3. Select Allowed no. if lock active >  
3. Select Phone lock and one of the  
Assign and one of the three slots.  
following:  
4. Enter the phone number, or select  
Search to retrieve the number from  
the phone book; select OK.  
Off—Immediately turns off the  
phone lock feature.  
Lock now—Immediately turns on  
the phone lock feature.  
To place a call to an allowed number  
when the phone is locked, enter the  
allowed number and press the call key.  
On power-up—Turns on the phone  
lock feature the next time you turn  
the phone on.  
Copyright © 2006 Nokia. All rights reserved.  
 
59  
   
S e t t i n g s  
Avoid entering a lock code similar to  
emergency numbers to prevent  
accidental emergency calls.  
Change lock code  
When changing the lock code, avoid  
using codes similar to emergency  
numbers such as 111 to prevent  
accidental dialling of an emergency  
number.  
Call restrictions  
Call restrictions allows you to block or  
permit numbers for incoming or  
outgoing calls.  
If you enter an incorrect lock code five  
times in a row, your phone may ask you  
for the security code. By default, the  
security code is the five-digit number,  
12345.  
1. In standby mode, select Menu >  
Settings > Security.  
2. Enter the lock code, and select OK.  
Note: If you enter the wrong  
lock code five times in  
3. Select Call restrictions and the type  
of calls you wish to restrict:  
succession, your phone will  
not accept your current lock  
code for 5 minutes. This  
occurs even if when you  
power down the phone  
Restrict outgoing calls—Set  
restrictions on making calls.  
Restrict incoming calls—Set  
restrictions on receiving calls.  
between incorrect attempts.  
4. Select whether to block or allow  
numbers:  
To change the phone lock code, do the  
following:  
Blocked numbers—Set numbers  
that are blocked on incoming calls,  
allowing all other numbers. When a  
number is blocked, the call is sent  
to voice mail.  
1. In standby mode, select Menu >  
Settings > Security.  
2. Enter the current lock code, and  
select OK.  
Allowed numbers—Set numbers  
that are allowed, blocking all other  
numbers.  
3. Select Change lock code.  
4. Enter the new lock code (only 4  
characters), and select OK.  
5. To modify the restriction list, select  
from the following options:  
5. Enter the new lock code again for  
verification, and select OK.  
Select—Add numbers to the  
restriction list.  
When you change your lock code,  
make sure to remember it. If necessary,  
write it down and store it in a safe  
place away from your phone.  
Copyright © 2006 Nokia. All rights reserved.  
60  
 
   
S e t t i n g s  
Add restriction—Add a restriction  
to a number (unavailable if  
memory is full).  
Application sounds > On or Off—Play  
sounds during an application.  
Application lights > App. defined or  
Default—Play lights during an  
application.  
Edit—Edit a restriction on a  
number.  
Delete—Delete a number from  
Application vibration > On or Off—  
restriction list.  
Vibrate phone during an application.  
When calls are restricted, calls may be  
possible to the official emergency  
number programmed into your device.  
Network  
The menu options you see in your  
phone are based on your service  
provider’s network. The network  
determines which options actually  
appear in the phone menu. Check with  
your service provider for more  
information.  
Voice privacy  
Voice privacy is a network service, and  
its function depends on a variety of  
services. Contact your service provider  
for more information.  
The Network menu personalises the  
way your phone chooses a network in  
which to operate while you are within  
or outside of your primary or home  
system. Your phone is set to search for  
the most cost-effective network.  
If your phone cannot find a preferred  
network, it selects a network  
If your wireless service provider or  
network operator supports this feature,  
the voice privacy feature protects the  
privacy of your current phone  
conversation from other callers placing  
phone calls on your same network.  
1. In standby mode, select Menu >  
Settings > Security.  
automatically based on the option you  
choose in the Network menu.  
2. Enter the lock code, and select OK.  
3. Select Voice privacy > On or Off.  
Roaming options  
Application settings  
If supported by your wireless service  
provider or network operator, you can  
select which roaming option you wish  
to use. In standby mode, select Menu >  
Settings >Network >Roamingoptions  
and one of the following.  
The Application settings menu changes  
game and application settings.  
In standby mode, select Menu >  
Settings > Application settings and  
one of the following:  
Copyright © 2006 Nokia. All rights reserved.  
 
61  
       
S e t t i n g s  
Home only—You can make and receive Analog per call—You can select an  
calls in your home area only.  
analog network on a call to call basis.  
Automatic—The phone automatically  
searches for service in another digital  
network. If one is not found, the phone  
uses analog service. The roaming rate  
applies when not in the home service  
area.  
IS-95 per call—You can select an IS-95  
network on a call to call basis.  
Digital only—You can make and receive  
calls on a digital network only.  
Network services  
The following features are network  
services. See also “Network services”,  
p. viii.  
Automatic A—The phone automatically  
searches for service in another digital  
network. The roaming rate applies  
when not in the home service area.  
Automatic B—The phone automatically  
searches for service in another digital  
network. If one is not found, the phone  
uses analog service. The roaming rate  
applies when not in the home service  
area.  
Store a feature code  
Network feature setting allows you to  
activate network services in your  
phone using feature codes received  
from your service provider.  
1. In standby mode, select Menu >  
Settings > Network services >  
Network feature setting.  
Mode  
If supported by your wireless service  
provider or network operator, you can  
choose whether your phone will use  
digital or analog service. In standby  
mode, select Menu > Settings >  
Network > Mode and one of the  
following.  
2. Enter the feature code from your  
service provider (for example, *900  
for activating Divert if busy), and  
select OK.  
3. Select Call divert.  
4. Scroll to the type of diverting that  
matches the feature code you  
entered (for example, Divert if  
busy), select Activate.  
Digital preferred—You prefer to make  
calls on a digital network, but will find  
another network, if necessary.  
Analog only—You can make and  
receive calls on an analog network  
only.  
The activated feature code is now  
stored in your phone, and you are  
returned to the Feature code: prompt.  
Continue entering other feature codes  
Copyright © 2006 Nokia. All rights reserved.  
62  
 
       
S e t t i n g s  
(for example, *900 to cancel Divert if  
busy), or press the end key to return to  
standby mode.  
Call waiting  
Call If your wireless provider supports  
this feature, call waiting notifies you  
of an incoming call even while you are  
in a call. You can accept, reject, or  
ignore the incoming call.  
When you enter a network feature  
code successfully the feature becomes  
visible in the Network services menu.  
To activate, in standby mode, select  
Menu > Settings > Network services >  
Call waiting > Activate.  
Call divert  
Call divert tells your network to  
redirect incoming calls to another  
number. Call divert is a network service  
and may not work the same in all  
networks, so contact your wireless  
provider for availability and  
information.  
During a call, select Answer or press  
the call key to answer the waiting call.  
The first call is put on hold. Press the  
end key to end the active call.  
To cancel, in standby mode, select  
Menu > Settings > Network services >  
Call waiting > Cancel.  
To activate, do the following:  
1. In standby mode, select Menu >  
Settings > Network services > Call  
divert and the following:  
Restore factory  
settings  
Divert all calls—Divert all calls to  
You can reset some of the menu  
settings to their original values.  
Data that you have entered or  
downloaded is not deleted (for  
example, entries in your contacts list  
are not affected).  
the number you specify.  
2. Select Activate.  
3. Enter the number to which your  
calls, data, or other information are  
diverted, and select OK.  
To cancel, in standby mode, select  
Menu > Settings > Network services >  
Call divert > Cancel all call diverting.  
1. In standby mode, select Menu >  
Settings > Restore factory sett.  
2. Enter the lock code, and select OK.  
Cancel all call diverting may affect  
your ability to receive voice mail  
messages. Contact your wireless  
provider for specific details.  
Note: Depending on your  
wireless service provider or  
network operator, your device  
may request the security code  
(defaulted to 12345) instead  
of the lock code.  
Copyright © 2006 Nokia. All rights reserved.  
 
63  
     
S e t t i n g s  
Phone details  
You can view the current details of  
your phone. In standby mode, select  
Menu > Settings > Phone details and  
one of the following options:  
User details—Shows the phone’s  
current number details.  
Version details—Shows the hardware,  
software and browser version  
information for the phone.  
System details—Shows the digital  
network the phone is on.  
Icon details—Shows the icons used.  
Copyright © 2006 Nokia. All rights reserved.  
64  
 
 
O r g a n i s e r  
10. Organiser  
Your phone contains features to help  
organise your everyday life, including  
an alarm clock, calendar, calculator,  
countdown timer, and stopwatch.  
Repeat alarm  
You can set the alarm to repeat every  
day or only on certain days of the  
week.  
1. In standby mode, select Menu >  
Organiser > Alarm clock > Repeat  
alarm > On.  
Alarm clock  
Set an alarm  
2. Check the day or days of the week  
you wish to repeat the alarm, and  
select Mark. Select Unmark to  
remove a day.  
The alarm clock is based on the phone  
clock. It sounds an alert any time you  
specify and even works if the phone is  
turned off.  
3. Select Done when you have added  
1. In standby mode, select Menu >  
Organiser > Alarm clock > Alarm  
time.  
all desired days.  
If you need to revise the days for a  
repeated alarm, select Menu >  
Organiser > Alarm clock > Repeat  
alarm > Repetition days from standby  
mode.  
2. Enter the time for the alarm in  
hh:mm format, and select OK.  
3. Select am or pm if 12-hour clock  
format is on.  
If you need to stop a repeated alarm,  
Alarm on appears briefly in the display, select Menu > Organiser > Alarm  
and  
appears in standby mode.  
clock > Repeat alarm > Off in standby  
mode.  
If you need to reset the alarm select  
Menu > Organiser > Alarm clock >  
Alarm time > On from standby mode.  
Set the alarm tone  
You can set which tone is played when  
the alarm sounds.  
To turn off the alarm, select Menu >  
Organiser > Alarm clock > Alarm  
time > Off from standby mode.  
In standby mode, select Menu >  
Organiser > Alarm clock > Alarm tone  
and one of the following:  
Copyright © 2006 Nokia. All rights reserved.  
 
65  
         
O r g a n i s e r  
Standard—Select the default alarm.  
Calendar  
Open Gallery—Select a tone from the  
Gallery as the alarm.  
The calendar keeps track of reminders,  
calls you need to make, meetings,  
memo, and birthdays. It can even  
sound an alarm for any of these events.  
Set the snooze time-out  
You can set the Snooze time-out for  
the alarm.  
The default monthly view provides an  
overview of the selected month and  
weeks. You can also jump to a specific  
date. Any days or dates that appear in  
bold font contain calendar notes such  
as a meeting or reminder. A short  
summary of notes for the day appear at  
the bottom of the screen.  
In standby mode, select Menu >  
Organiser > Alarm clock > Snooze  
time-out and choose a snooze time.  
When the alarm sounds, your phone  
beeps, vibrates (if vibrate alert is on in  
the currently active profile), and lights  
up.  
Open calendar  
In standby mode, select Menu >  
Organiser > Calendar.  
With the phone on, select Stop to shut  
the alarm off or Snooze. If you select  
Snooze, the alarm stops for 10  
minutes.  
Scroll to move the cursor in the  
calendar view.  
If you do not press a key, the alarm  
stops (snoozes) for the Snooze time-  
out, then sounds again.  
Calendar options  
In standby mode, select Menu >  
Organiser > Calendar > Options and  
one of the following:  
If the alarm time is reached while the  
phone is switched off, the phone  
switches itself on and starts sounding  
the alarm tone. If you select Stop, the  
device asks whether you want to  
activate the phone for calls. Select No  
to switch off the device or Yes to make  
and receive calls. Do not select Yes  
when wireless phone use may cause  
interference or danger.  
Week view—View your calendar by  
weeks. To return to month view select  
Back, while in the Week view.  
Make a note—Create a note on the  
selected date.  
Go to date—Jump to a specific date.  
Enter the date (for example, 15/07/  
2005), and select OK.  
Go to today—Jump to the current date.  
Copyright © 2006 Nokia. All rights reserved.  
66  
 
       
O r g a n i s e r  
Settings—Modify the calendar  
settings.  
Birthday—Enter the person’s name,  
and select Save. Enter the year of  
birth. Choose an alarm option.  
Go to to-do list—Go directly to your to-  
do list.  
Memo—Enter the subject, and  
select Save. Enter a start and end  
date. Choose an alarm option.  
Delete all notes—Delete all calendar  
notes. This option appears only if a  
calendar note has been created.  
Reminder—Enter the reminder, and  
select Save. Choose an alarm  
option.  
Make a calendar note  
You can make a calendar note for a  
specific date. You can choose from five  
types of notes. Your phone asks for  
further information depending on  
which note you select. You can also set  
an alarm for your note.  
View calendar notes  
(day view)  
You can view the calendar notes for a  
day.  
1. In standby mode, select Menu >  
1. In standby mode, select Menu >  
Organiser > Calendar.  
Organiser > Calendar.  
2. Scroll to the date you want to view  
or select Options > Go to date. Days  
with notes appear in bold type.  
2. Highlight the date for which you  
want to make a note. Scroll or  
select Options > Go to date.  
3. Select View to see the list of notes  
3. Select Options > Make a note and  
for that day.  
one of the following  
To view a specific note, highlight the  
note, and select View again. If there  
are no notes for that date, select Add  
note to create a new calendar note.  
Meeting—Enter the subject, and  
select Save. Enter a location, and  
select Save. Enter a start and end  
time. Choose an alarm option.  
Call—Enter the phone number, and  
select Save. Enter a name, and  
select Save. Enter a time. Choose  
an alarm option. You can also  
select Options > Search to search  
your contacts.  
Options while viewing a day  
When viewing the list of notes for a  
day, you can highlight a note, select  
Options and one of the following:  
Make a note—Create a new note for  
the selected date.  
Delete—Delete the note.  
Copyright © 2006 Nokia. All rights reserved.  
 
67  
     
O r g a n i s e r  
Edit—Edit the note.  
Select Show to view the calendar note.  
Select Save to save the note to your  
calendar or Options > Discard to  
discard the note.  
Use detail—Use a detail contained in  
the note.  
Move—Move the note to another date  
on your calendar.  
Modify calendar settings  
In standby mode, select Menu >  
Organiser > Calendar > Options >  
Settings and one of the following:  
Repeat—Enable the note to recur on a  
regular basis (daily, weekly, biweekly,  
monthly, and yearly). Repeat is not  
available for Birthday note.  
Set the date—Enter the current date,  
and select OK.  
Go to date—Jump to another date on  
your calendar.  
Set the time—Enter the current time,  
and select OK.  
Go to today—Return to the current  
date.  
Time zone—Select your current time  
zone.  
Send note > Send as message, Via  
calendar, or Via Bluetooth—Send a  
calendar note in calendar format  
(vCal), in a text message, in a  
multimedia message, or directly to  
another device.  
Date format—Select your preferred  
date format.  
Date separator—Select your preferred  
date separator.  
Copy—Copy the note. You can paste  
the note to another date.  
Time format—Select your preferred  
time format.  
Settings—Modify the calendar  
settings.  
Default view—Select a monthly or  
weekly view.  
Go to to-do list—Go directly to your to-  
do list.  
Week starts—Select the day the week  
starts.  
Auto-delete notes—Select when to  
delete past notes.  
Receive a note in calendar  
format (vCal)  
When you receive a calendar note in  
calendar-to-calendar format (vCal),  
your phone displays Calendar note  
received.  
Copyright © 2006 Nokia. All rights reserved.  
68  
 
   
O r g a n i s e r  
Insert smiley—Inserts a smiley into  
your message.  
Notes  
You can write text notes with the  
Notes. You can also send notes using  
text messaging or Bluetooth  
connectivity.  
Insert word or Edit word—Enter or edit  
the text of a new word that might not  
appear in the predictive text  
dictionary. Option only appears when  
predictive text is on.  
Open notes  
In standby mode, select Menu >  
Organiser > Notes. You see your  
current list of notes.  
Insert symbol—Inserts a special  
character into your message.  
Option only appears when predictive  
text is on.  
If there are no notes, select Add to  
create your first note. If there are  
existing notes, highlight a note, and  
select View.  
Prediction on or Prediction off—Turn  
predictive text on or off.  
Matches—View matches found in the  
predictive text dictionary for the word  
you want to use. This displays only  
when predictive text is on.  
Make a note  
Initial note  
In standby mode, select Menu >  
Organiser > Notes > Add. Create your  
note, and select Save.  
Send a note  
1. In standby mode, select Menu >  
Organiser > Notes.  
Additional notes  
2. Highlight the note you wish to  
send, and select Options > Send  
note > Send as message, or Via  
Bluetooth to send the note in a text  
message, in a multimedia message,  
or directly to another device.  
In standby mode, select Menu >  
Organiser > Notes > Options > Make a  
note. Create your note, select any note  
options, and select Save.  
Create note options  
When you create a note, the following  
options are available:  
Insert time & date—Adds the time and  
date to your note.  
Close—Returns you to the notes list.  
Copyright © 2006 Nokia. All rights reserved.  
 
69  
       
O r g a n i s e r  
highlight a to-do list note, and select  
View.  
Notes options  
In standby mode, select Menu >  
Organiser > Notes > Options and one  
of the following:  
Make a to-do list note  
Make a note—Create a new note.  
Delete—Delete the note you selected.  
Edit—Edit the note you selected.  
Initial to-do list note  
In standby mode, select Menu >  
Organiser > To-do list > Add. Enter the  
subject, and select Save > High,  
Medium, or Low.  
Use detail—Use a detail contained in  
the note.  
Additional to-do list notes  
In standby mode, select Menu >  
Organiser > To-do list > Options >  
Add. Enter the subject, and select  
Save > High, Medium, or Low.  
Send note > Send as message, or Via  
Bluetooth—Send a note in a text  
message, in a multimedia message,  
or directly to another device.  
Delete all notes—Delete all notes.  
Create to-do list note options  
When you create a to-do list note, the  
following options are available:  
The note options appear only when you  
have created one or more notes.  
Insert smiley—Insert a smiley into your  
message.  
To-do list  
Use the To-do list feature to keep track  
of your tasks. You can save a task or  
errand as a to-do list note, select a  
priority level for the to-do list note,  
and mark it as done when you have  
completed it. You can sort the to-do  
list notes by priority or by date.  
Insert word or Edit word—Enter or edit  
the text of a new word that might not  
appear in the predictive text  
dictionary. This displays only when  
predictive text is on.  
Insert symbol—Insert a special  
character into your message.  
This displays only when predictive text  
is on.  
Open to-do list  
In standby mode, select Menu >  
Organiser > To-do list. You see your  
current to-do list.  
Prediction on or Prediction off—Turn  
predictive text on or off.  
Matches—View matches found in the  
predictive text dictionary for the word  
If there are no to-do tasks, select Add  
to create your first to-do list note.  
If there are existing to-do list notes,  
Copyright © 2006 Nokia. All rights reserved.  
70  
 
       
O r g a n i s e r  
you want to use. This displays only  
when predictive text is on.  
Send a to-do list note  
1. In standby mode, select Menu >  
Organiser > To-do list.  
Edit to-do list notes  
In standby mode, select Menu >  
Organiser > To-do list > View > Edit.  
Edit the subject, select Save.  
2. Highlight the note you wish to  
send, and select Options > Send >  
Send as message, Via calendar, or  
Via Bluetooth to send the to-do list  
note in calendar format (vCal), in a  
text message, in a multimedia  
message, or directly to another  
device.  
View to-do list notes  
In standby mode, select Menu >  
Organiser > To-do list > View >  
Options, and one of the following  
choices:  
To-do list options  
In standby mode, select Menu >  
Organiser > To-do list > Options and  
one of the following:  
Deadline—Change the deadline of the  
to-do list note.  
Mark note as done or Mark as not  
done—Indicate whether the to-do list  
note is completed or not.  
Add—Create a new to-do list note.  
Delete—Delete the to-do list note you  
selected.  
Delete—Delete the to-do list note.  
Mark note as done or Mark as not  
done—Indicate whether the to-do list  
note is completed or not.  
Use detail—Use a detail contained in  
the note.  
Edit priority—Change the priority to  
Use detail—Use a detail contained in  
High, Medium, or Low.  
the note.  
Send > Send as message, Via calendar,  
or Via Bluetooth—Send the to-do list  
note.  
Sort by deadline or Sort by priority—  
Sort the to-do list by either date or  
priority.  
Go to calendar—Leave the to-do list,  
Send > Send as message, Via calendar,  
or Via Bluetooth—Send the to-do list  
note in calendar format (vCal), in a text  
message, in a multimedia message, or  
directly to another device.  
and go to the calendar.  
Save to calendar—Save the to-do list  
note to your calendar.  
Copyright © 2006 Nokia. All rights reserved.  
 
71  
       
O r g a n i s e r  
Go to calendar—Leave the to-do list,  
and go to the calendar.  
Press the scroll key up or down to  
change the sign of your number or  
value.  
Save to calendar—Save the to-do list  
note you selected to your calendar.  
Press * to cycle through the add (+),  
subtract (-), multiply (*), and divide  
(/) characters. Pause briefly to  
select the displayed character.  
Delete done notes—Delete the to-do  
list note you selected from your  
calendar.  
3. Enter the second number in your  
calculation.  
Delete all notes—Delete all the to-do  
list notes.  
4. Select Equals.  
The to-do list options appear only  
when you have created one or more  
notes.  
To perform a square or square root  
calculation, select Options > Square or  
Square root.  
Calculator  
Currency converter  
The calculator in your phone adds,  
subtracts, multiplies, divides,  
You can convert foreign currency to  
domestic, or vice versa, directly from  
standby mode or from the Calculator  
menu.  
calculates the square and the square  
root, changes the sign of the number  
entered, and converts currency values.  
Note: When you change base  
currency, you must enter the  
new rates because all  
previously set exchange rates  
are set to zero.  
Note: This calculator has a  
limited accuracy and is  
designed for simple  
calculations.  
1. In standby mode, select Menu >  
Organiser > Calculator > Options >  
Exchange rate > Foreign units in  
domestic units or Domestic units in  
foreign units.  
Use calculator  
1. In standby mode, select Menu >  
Organiser > Calculator.  
2. Enter the first number in the  
calculation.  
Foreign units in domestic units—  
The number of domestic units it  
takes to make one unit of foreign  
currency.  
Press # for a decimal point if  
necessary.  
Copyright © 2006 Nokia. All rights reserved.  
72  
 
     
O r g a n i s e r  
Domestic units in foreign units—  
When the time runs out, your device  
The number of foreign units it takes sounds an alarm.  
to make one unit of your domestic  
Set the normal timer  
currency.  
1. In standby mode, select Menu >  
2. Enter the exchange rate (press # to  
Organiser > Timer > Normal timer.  
insert a decimal), and select OK.  
2. Enter the time (in hh:mm:ss  
3. Select Back to return to the  
Calculator screen, and enter the  
currency amount to convert.  
format), and select OK.  
3. Enter a note for the timer, and  
select Start.  
4. Select Options > In domestic or In  
and the timer (in hh:mm:ss  
format) appear in standby mode when  
the countdown timer is running.  
foreign.  
In domestic—Converts foreign  
currency to domestic currency.  
When the time runs out, your phone  
sounds an alarm, vibrates, and flashes  
its lights. If you are in standby mode,  
select Restart or Exit. If you are not in  
standby mode, press any key during the  
alarm to stop the timer.  
In foreign—Converts domestic  
currency to foreign currency.  
5. If you have not already entered an  
exchange rate, the device prompts  
you to enter it. Select OK. You can  
edit the exchange rate at any time.  
After 60 seconds the timer alert  
expires automatically. Select Exit or  
press the end key to clear the timer  
note.  
Timers  
Your device contains two event timers:  
a normal timer that counts down a set  
interval, and an interval timer that  
counts up set intervals.  
Change the timer  
After you have set a timer, you can  
change the time.  
The timers only work when the phone  
is on. Once you turn off your phone,  
the timers are no longer active.  
1. In standby mode, select Menu >  
Organiser > Timer > Change time.  
2. Enter the new time, and select OK.  
3. Leave the note as it was, or enter a  
Normal timer  
This countdown timer enables you to  
enter a specific duration (up to 99  
hours, 59 minutes, and 59 seconds).  
new note, and select Start.  
Copyright © 2006 Nokia. All rights reserved.  
 
73  
   
O r g a n i s e r  
Stop the timer before the  
alarm sounds  
After you have set the timer, you can  
Use an interval timer  
1. In standby mode, select Menu >  
Organiser > Timer > Interval timer.  
stop the timer.  
2. Select Start timer, View timer, Edit  
timer, Add new timer, or Delete  
timer. These options only appear if  
you have already created an  
interval timer.  
In standby mode, select Menu >  
Organiser > Timer > Stop timer.  
Interval timer  
The interval timer in your device allows  
you to store multiple interval timers.  
You can define and store up to 10  
timing periods for each interval timer.  
Once at least one interval timer is set  
and stored, you can select the interval  
timer and one of the stored intervals  
for that timer. When the selected  
Stopwatch  
Your phone has a stopwatch that can  
be used to track time. The stopwatch  
displays time in hours, minutes,  
seconds, and fractions of a second in  
hh:mm:ss.ss format.  
Using the stopwatch or allowing it to  
run in the background when using  
other features increases the demand  
on battery power and reduces the  
battery life.  
interval expires, your phone sounds an  
alarm, vibrates, and flashes its lights.  
Set an interval timer  
1. In standby mode, select Menu >  
Organiser > Timer > Interval timer.  
Measure split or lap time  
Use the split time or lap time functions  
for activities where you need to pace  
yourself.  
2. Select Add new timer. This option  
only appears if you have already  
created an interval timer.  
3. Enter a name for the timer and  
1. In standby mode, select Menu >  
Organiser > Stopwatch > Split  
timing or Lap timing > Start.  
select Save.  
4. Enter a name for the first timer  
period, and select Save.  
Split timing—Use the split time  
function for such activities as a  
long distance race when you need  
to pace yourself. Select Split to  
note the lapsed time. The timer  
continues to run and the split time  
5. Enter the desired time interval, and  
select OK.  
6. Select an existing stored period  
and Edit period, Add period, Delete  
period, or Start timer.  
Copyright © 2006 Nokia. All rights reserved.  
74  
 
       
O r g a n i s e r  
appears below the running time.  
Show last time—View the last  
Each time you select Split, the new measured time.  
measured time appears at the  
beginning of the list. The maximum  
number of splits is 20.  
Split timing—Use the split time  
function.  
Lap timing—Use the lap time function.  
Lap timing—Use the lap time  
View times—Browse saved times.  
function when you want to track  
how long it takes to complete each  
cycle or lap. Select Lap to note the  
lap time. The clock stops, then  
immediately restarts from zero. The  
lap time appears below the running  
time. Each time you select Lap, the  
new measured time appears at the  
beginning of the list. The maximum  
number of laps is 20.  
Delete times > One by one or Delete  
all—Delete saved times.  
Operation note  
If you press the end key and return to  
standby mode, the clock continues to  
run in the background, and  
appears at the top of the screen.  
To return to the Stopwatch screen, do  
the following:  
2. Select Stop to end timing and  
display total time.  
1. In standby mode, select Menu >  
Organiser > Stopwatch >  
Continue.  
Save a time  
To save a time while the clock is  
running, select Stop > Save, enter a  
name for the measurement, and select  
OK. If you do not enter a name, the  
total time is used as the default title  
for the lap or split time.  
2. To stop the clock, select Stop.  
Stopwatch options  
In standby mode, select Menu >  
Organiser > Stopwatch and one of the  
following:  
Continue—Continues to measure time.  
Only appears if clock is running and  
you are returning to stopwatch screen.  
Copyright © 2006 Nokia. All rights reserved.  
 
75  
     
E x t r a s  
11. Extras  
Note: Only install applications  
from sources that offer  
adequate protection against  
harmful software.  
Games  
Select games  
In standby mode, select Menu >  
Extras > Games to display the games  
on your device.  
Memory status  
You can view the memory available for  
application installations. in standby  
mode, select Menu > Extras >  
Memory status  
You can view the memory available for  
game installations. In standby mode,  
select Menu > Extras > Games >  
Options > Memory status.  
Collection > Options > Memory status.  
Collection  
Select application  
In standby mode, select Menu >  
Extras > Collection > Select  
application. Scroll to an application  
and select Open, or press the call key.  
An application may require a few  
seconds to load. When you open an  
application, wait for the launch screen  
to disappear. At that point, the  
application is ready.  
Leaving applications running in the  
background increases the demand on  
battery power and reduces the battery  
life.  
Copyright © 2006 Nokia. All rights reserved.  
76  
 
             
M i n i b r o w s e r  
12. Minibrowser  
Minibrowser is a network service.  
See “Network services”, p. viii, for more  
information.  
Mobile Internet  
access  
Because mobile Internet content is  
designed to be viewed from your  
phone, your wireless provider is now  
your mobile Internet service provider  
as well.  
Your phone has a built-in mobile Web  
browser you can use to connect to  
selected services on the mobile  
Internet. If your wireless service  
provider or network operator supports  
this feature, you can view weather  
reports, check news or flight times,  
view financial information, and much  
more. The Web browser on your phone  
can display WAP-based content.  
Your wireless provider has created a  
home page and set up your browser to  
go to this page when you log on to the  
mobile Internet. Once at your service  
provider’s home page, you may find  
links to a number of other sites.  
Your device may have some bookmarks  
loaded for sites not affiliated with  
Nokia. Nokia does not warrant or  
endorse these sites. If you choose to  
access them, you should take the same  
precautions, for security or content, as  
you would with any Internet site.  
It should not be necessary to manually  
configure the browser on your phone.  
Normally this is done by your wireless  
provider when you subscribe to the  
feature. Contact your wireless provider  
if you have problems using the  
browser.  
If the security indicator (  
) is  
displayed during a connection, the  
data transmission between the device  
and the Internet gateway or server is  
encrypted. The service provider secures  
the data transmission between the  
gateway and the content server.  
Sign on to the mobile  
Internet  
In standby mode, select Menu >  
Minibrowser.  
After a brief pause, your phone  
attempts to connect to your wireless  
provider’s home page. If you receive an  
error message, your phone may not be  
set up for browsing. Contact your  
Important: Use only services  
that you trust and that offer  
adequate security and  
protection against harmful  
software.  
Copyright © 2006 Nokia. All rights reserved.  
 
77  
       
M i n i b r o w s e r  
wireless provider to make sure that  
your phone is configured properly.  
If your wireless service provider or  
network operator does not support  
incoming calls while browsing,  
incoming calls are automatically  
forwarded to voice mail.  
Navigate the mobile  
Internet  
Since your phone screen is much  
smaller than a computer screen,  
mobile Internet content is displayed  
differently than you may be  
Make an emergency call  
while online  
You can end your data connection and  
make an emergency call.  
accustomed to seeing. This section  
contains guidelines for using phone  
keys to navigate a WAP site.  
1. To close your mobile Internet  
connection, press the end key.  
2. Press the end key as many times as  
needed to clear the display and  
ready the phone for calls.  
Phone keys  
To browse the WAP site, scroll up or  
down.  
3. Enter the emergency number for  
your present location (for example,  
111). Emergency numbers vary by  
location.  
Select a highlighted item.  
To enter text, press # to switch text  
input modes, and then press 0-9.  
4. Press the call key.  
To enter special characters, press *.  
Clear the cache and  
disconnect  
Receive a call while online  
Depending on your wireless service  
provider or network operator, you may  
still be able to receive a voice call while  
using the WAP browser.  
A cache is a memory location that is  
used to store data temporarily. If you  
have tried to access or have accessed  
confidential information requiring  
passwords, empty the cache after each  
use. The information or services you  
have accessed are stored in the cache.  
To empty the cache while in the  
To answer the incoming call, press  
the call key.  
To reject the incoming call, press  
the end key.  
After you end your voice call, the  
mobile Internet connection  
automatically resumes.  
browser menu, select Navigate >  
Advanced> Clear. Highlight and select  
Cache > Clear. The cache also clears  
Copyright © 2006 Nokia. All rights reserved.  
78  
 
         
M i n i b r o w s e r  
when you press and hold the end key to  
power off your device.  
To close your mobile Internet  
connection while browsing, press the  
end key.  
Copyright © 2006 Nokia. All rights reserved.  
 
79  
P C c o n n e c t i v i t y  
13. PC connectivity  
PC data transfer  
You can transfer data, such as music,  
photos, and videos, from your device to  
a compatible PC or from a compatible  
PC to your device using Bluetooth  
connectivity. For more information,  
see “Bluetooth connectivity”, p. 54.  
Nokia PC Suite  
Nokia PC Suite software is available for  
this phone. Nokia PC Suite is a  
collection of powerful tools that you  
can use to manage your phone  
features and data. Each component is a  
separate program that includes online  
helps.  
Nokia PC Suite software, installation  
instructions, and other documentation  
is provided free of charge and can be  
downloaded from the software  
downloads of the Nokia web site:  
Some of the features in your phone  
require network support. Contact your  
service provider for availability and  
configuration instructions.  
Copyright © 2006 Nokia. All rights reserved.  
80  
 
     
E n h a n c e m e n t s  
14. Enhancements  
Check the model number of any  
charger before use with this device.  
This device is intended for use when  
supplied with power from the AC-3 or  
AC-4 charger.  
Checkregularlythatenhancements  
installed in a vehicle are mounted  
and are operating properly.  
Installation of any complex car  
enhancements must be made by  
qualified personnel only.  
Warning: Use only batteries,  
chargers and enhancements  
approved by Nokia for use  
with this particular model.  
The use of any other types  
may invalidate any approval  
or warranty, and may be  
dangerous.  
Power  
Standard Li-Ion Battery (BL-6C)  
Compact Charger (AC-3)  
Travel Charger (AC-4)  
Mobile Charger (DC-4)  
Charger Adapter (CA-44)  
For availability of approved  
Use the CA-44 charger adapter to  
connect the phone with Nokia  
chargers with a larger barrel size,  
including ACP-7, ACP-8, ACP-9,  
ACP-12, AC-1 (retractable  
charger), and LCH-12 (mobile  
charger).  
enhancements, please check with your  
dealer. When you disconnect the  
power cord of any enhancement, grasp  
and pull the plug, not the cord.  
A few practical rules about accessories  
and enhancements:  
Keep all accessories and  
enhancements out of the reach of  
small children.  
USB data cable  
Connectivity Cable (CA-53)  
Handsfree  
When you disconnect the power  
cord of any accessory or  
enhancement, grasp and pull the  
plug, not the cord.  
Headrest Handsfree (BHF-3)  
CDMA Headrest Handsfree (BHF-4)  
Easy to Use Car Handsfree (HF-3)  
Copyright © 2006 Nokia. All rights reserved.  
 
81  
 
E n h a n c e m e n t s  
Advanced Plug-in Car Handsfree  
(HF-6)  
Wireless Plug-in Car Handsfree  
(HF-6W)  
Headsets  
Mono Headsets (HDB-4, HS-5,  
HS-6, HS-8, HS-9)  
Stereo Headsets (HDS-3, HS-3,  
HS-23)  
Wireless Mono Headsets (HDW-3,  
HS-4W, HS-11W, HS-21W,  
HS-36W, HS-37W))  
Wireless Image Headsets (HS-13W)  
Wireless Stereo Headsets  
(HS-12W)  
Miscellaneous  
Inductive Hearing Aid (LPS-4)  
TTY Adapter (HDA-10)  
Advanced Car Kit (CK-1W)  
Wireless Car Kit (CK-7W)  
Digital Pen (SU-1B)  
Audio Adapter (AD-15)  
Music Stand (MD-1)  
Copyright © 2006 Nokia. All rights reserved.  
82  
 
R e f e r e n c e i n f o r m a t i o n  
15. Reference information  
This section provides information  
about your phone batteries,  
Do not leave fully charged battery  
connected to a charger, since  
enhancements, chargers, and safety  
guidelines. Be aware that the  
overcharging may shorten its lifetime.  
If left unused, a fully charged battery  
information in this section is subject to will lose its charge over time.  
change as batteries, chargers, and  
enhancements change.  
If the battery is completely discharged,  
it may take a few minutes before the  
charging indicator appears on the  
display or before any calls can be  
made.  
Batteries and  
chargers  
Use the battery only for its intended  
purpose. Never use any charger or  
battery that is damaged.  
Your device is powered by a  
rechargeable battery. The full  
performance of a new battery is  
achieved only after two or three  
complete charge and discharge cycles.  
The battery can be charged and  
discharged hundreds of times, but it  
will eventually wear out. When the talk  
and standby times are noticeably  
shorter than normal, replace the  
battery. Use only Nokia approved  
batteries, and recharge your battery  
only with Nokia approved chargers  
designated for this device.  
Do not short-circuit the battery.  
Accidental short-circuiting can occur  
when a metallic object such as a coin,  
clip, or pen causes direct connection of  
the positive (+) and negative (-)  
terminals of the battery. (These look  
like metal strips on the battery.) This  
might happen, for example, when you  
carry a spare battery in your pocket or  
purse. Short-circuiting the terminals  
may damage the battery or the  
connecting object.  
If a replacement battery is being used  
for the first time or if the battery has  
not been used for a prolonged period, it  
may be necessary to connect the  
charger and then disconnect and  
reconnect it to start the charging.  
Leaving the battery in hot or cold  
places, such as in a closed car in  
summer or winter conditions, will  
reduce the capacity and lifetime of the  
battery. Always try to keep the battery  
between 15°C and 25°C (59°F and  
77°F). A device with a hot or cold  
Unplug the charger from the electrical  
plug and the device when not in use.  
Copyright © 2006 Nokia. All rights reserved.  
 
83  
   
R e f e r e n c e i n f o r m a t i o n  
battery may not work temporarily,  
cannot be verified, return the battery  
even when the battery is fully charged. to the place of purchase.  
Battery performance is particularly  
Authenticate hologram  
1. When looking at the hologram on  
limited in temperatures well below  
freezing.  
the label, you should see the Nokia  
connecting hands symbol from one  
angle and the Nokia Original  
Enhancements logo when looking  
from another angle.  
Do not dispose of batteries in a fire as  
they may explode. Batteries may also  
explode if damaged. Dispose of  
batteries according to local  
regulations. Please recycle when  
possible. Do not dispose as household  
waste.  
Nokia battery  
authentication  
guidelines  
Always use original Nokia batteries for  
your safety. To check that you are  
getting an original Nokia battery,  
purchase it from an authorised Nokia  
dealer, look for the Nokia Original  
Enhancements logo on the packaging  
and inspect the hologram label using  
the following steps:  
2. When you angle the hologram left,  
right, down, and up, you should see  
1, 2, 3, and 4 dots on each side  
respectively.  
Successful completion of the four  
steps is not a total assurance of the  
authenticity of the battery. If you have  
any reason to believe that your battery  
is not an authentic original Nokia  
battery, you should refrain from using  
it, and take it to the nearest authorised  
Nokia service point or dealer for  
3. Scratch the side of the label to  
reveal a 20-digit code, for example,  
12345678919876543210. Turnthe  
battery so that the numbers are  
facing upwards. The 20-digit code  
reads starting from the number at  
the top row followed by the  
assistance. Your authorised Nokia  
service point or dealer will inspect the  
battery for authenticity. If authenticity  
bottom row.  
Copyright © 2006 Nokia. All rights reserved.  
84  
 
   
R e f e r e n c e i n f o r m a t i o n  
You should receive a message  
indicating whether the code can be  
authenticated.  
If you need assistance confirming  
the battery code, contact your local  
Nokia Care Centres listed at  
www.nokia-asia.com/  
carecentrelocator.  
4. Confirm that the 20-digit code is  
valid by following the instructions  
What if your battery is not authentic?  
If you cannot confirm that your Nokia  
battery with the hologram on the label  
is an authentic Nokia battery,  
please do not use the battery. Take it to  
the nearest authorised Nokia service  
point or dealer for assistance. The use  
of a battery that is not approved by the  
manufacturer may be dangerous and  
may result in poor performance and  
damage to your device and its  
To create a text message enter the  
20-digit code, for example,  
12345678919876543210, and send to enhancements. It may also invalidate  
any approval or warranty applying to  
the device.  
+44 7786 200276.  
To create a text message,  
To find out more about original  
Nokia batteries, visit  
For countries in Asia Pacific,  
excluding India: Enter the 20-digit  
code, for example,  
12345678919876543210, and  
send to +61 427151515.  
For India only: Enter Battery  
followed by the 20-digit battery  
code, for example,  
Battery 12345678919876543210,  
and send to 5555.  
National and international operator  
charges will apply.  
Copyright © 2006 Nokia. All rights reserved.  
 
85  
C a r e a n d m a i n t e n a n c e  
16. Care and maintenance  
Your device is a product of superior  
design and craftsmanship and should  
be treated with care. The suggestions  
below will help you protect your  
warranty coverage.  
Do not use harsh chemicals,  
cleaning solvents, or strong  
detergents to clean the device.  
Do not paint the device. Paint can  
clog the moving parts and prevent  
proper operation.  
Keep the device dry. Precipitation,  
humidity and all types of liquids or  
moisture can contain minerals that  
will corrode electronic circuits. If  
your device does get wet, remove  
the battery and allow the device to  
dry completely before replacing it.  
Use only the supplied or an  
approved replacement antenna.  
Unauthorised antennas,  
modifications, or attachments  
could damage the device and may  
violate regulations governing radio  
devices.  
Do not use or store the device in  
dusty, dirty areas. Its moving parts  
and electronic components can be  
damaged.  
Use chargers indoors.  
Always create a backup of data you  
want to keep, such as contacts and  
calendar notes, before sending  
your device to a service facility.  
Do not store the device in hot  
areas. High temperatures can  
shorten the life of electronic  
devices, damage batteries, and  
warp or melt certain plastics.  
All of the above suggestions apply  
equally to your device, battery,  
charger, or any enhancement. If any  
device is not working properly, take it  
to the nearest authorised service  
facility for service.  
Do not store the device in cold  
areas. When the device returns to  
its normal temperature, moisture  
can form inside the device and  
damage electronic circuit boards.  
Do not attempt to open the device  
other than as instructed in this  
guide.  
Do not drop, knock, or shake the  
device. Rough handling can break  
internal circuit boards and fine  
mechanics.  
Copyright © 2006 Nokia. All rights reserved.  
86  
 
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
17. Additional safety information  
Your device and its enhancements may device, because information stored on  
contain small parts. Keep them out of  
the reach of small children.  
them may be erased.  
Your device and its enhancements may  
contain small parts. Keep them out of  
the reach of small children.  
Operating  
environment  
Medical devices  
Operation of any radio transmitting  
Remember to follow any special  
regulations in force in any area and  
always switch off your device when its equipment, including wireless phones,  
use is prohibited or when it may cause may interfere with the functionality of  
interference or danger. Use the device  
only in its normal operating positions.  
inadequately protected medical  
devices. Consult a physician or the  
manufacturer of the medical device to  
determine if they are adequately  
shielded from external RF energy or if  
you have any questions. Switch off  
your device in health care facilities  
when any regulations posted in these  
areas instruct you to do so. Hospitals or  
health care facilities may be using  
equipment that could be sensitive to  
external RF energy.  
This device meets RF exposure  
guidelines when used either in  
the normal use position against the  
ear or when positioned at least  
2.2 centimeters (7/8 inch) away from  
the body. When a carry case, belt clip  
or holder is used for body-worn  
operation, it should not contain metal  
and should position the device the  
above-stated distance from your body.  
To transmit data files or messages, this  
device requires a good quality  
Pacemakers  
Pacemaker manufacturers recommend  
that a minimum separation of  
15.3 centimeters (6 inches) be  
maintained between a wireless phone  
and a pacemaker to avoid potential  
interference with the pacemaker.  
These recommendations are consistent  
with the independent research by and  
recommendations of Wireless  
Technology Research. Persons with  
pacemakers should:  
connection to the network. In some  
cases, transmission of data files or  
messages may be delayed until such a  
connection is available. Ensure the  
above separation distance instructions  
are followed until the transmission is  
completed.  
Parts of the device are magnetic.  
Metallic materials may be attracted to  
the device. Do not place credit cards or  
other magnetic storage media near the  
Copyright © 2006 Nokia. All rights reserved.  
 
87  
       
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Always keep the device more than  
15.3 centimeters (6 inches) from  
the pacemaker;  
flammable liquids, gases, or explosive  
materials in the same compartment as  
the device, its parts, or enhancements.  
For vehicles equipped with an air bag,  
remember that air bags inflate with  
great force. Do not place objects,  
including installed or portable wireless  
equipment in the area over the air bag  
or in the air bag deployment area.  
If in-vehicle wireless equipment is  
improperly installed and the air bag  
inflates, serious injury could result.  
Not carry the device in a breast  
pocket; and  
Hold the device to the ear opposite  
the pacemaker to minimise the  
potential for interference.  
If you suspect interference, switch off  
your device and move the device away.  
Hearing aids  
Using your device while flying in  
aircraft is prohibited. Switch off your  
device before boarding an aircraft. The  
use of wireless teledevices in an  
aircraft may be dangerous to the  
operation of the aircraft, disrupt the  
wireless telephone network, and may  
be illegal.  
Some digital wireless devices may  
interfere with some hearing aids.  
If interference occurs, consult your  
service provider.  
Vehicles  
RF signals may affect improperly  
installed or inadequately shielded  
electronic systems in motor vehicles  
such as electronic fuel injection  
systems, electronic antiskid (antilock)  
braking systems, electronic speed  
control systems, air bag systems. For  
more information, check with the  
manufacturer or its representative of  
your vehicle or any equipment that has  
been added.  
Potentially explosive  
environments  
Switch off your device when in any  
area with a potentially explosive  
atmosphere and obey all signs and  
instructions. Potentially explosive  
atmospheres include areas where you  
would normally be advised to turn off  
your vehicle engine. Sparks in such  
areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Switch off the device at refuelling  
points such as near gas pumps at  
service stations. Observe restrictions  
on the use of radio equipment in fuel  
depots, storage, and distribution areas,  
chemical plants or where blasting  
operations are in progress. Areas with  
Only qualified personnel should service  
the device, or install the device in a  
vehicle. Faulty installation or service  
may be dangerous and may invalidate  
any warranty that may apply to the  
device. Check regularly that all  
wireless device equipment in your  
vehicle is mounted and operating  
properly. Do not store or carry  
Copyright © 2006 Nokia. All rights reserved.  
88  
 
       
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
a potentially explosive atmosphere are call. Consult this guide or your service  
often but not always clearly marked.  
They include below deck on boats,  
chemical transfer or storage facilities,  
vehicles using liquefied petroleum gas  
(such as propane or butane), and areas  
where the air contains chemicals or  
particles such as grain, dust, or metal  
powders.  
provider.  
When making an emergency call, give  
all the necessary information as  
accurately as possible. Your wireless  
phone may be the only means of  
communication at the scene of an  
accident. Do not end the call until  
given permission to do so.  
Emergency calls  
Certification  
Important: Wireless phones,  
including this phone, operate  
using radio signals, wireless  
networks, landline networks,  
and user-programmed  
information (SAR)  
THIS DEVICE MEETS INTERNATIONAL  
GUIDELINES FOR EXPOSURE TO RADIO  
WAVES  
Your mobile device is a radio  
functions. Because of this,  
connections in all conditions  
cannot be guaranteed. You  
should never rely solely on any  
wireless phone for essential  
communications like medical  
emergencies.  
transmitter and receiver. It is designed  
and manufactured not to exceed the  
limits for exposure to radio frequency  
(RF) recommended by international  
guidelines (ICNIRP). These limits are  
part of comprehensive guidelines and  
establish permitted levels of RF energy  
for the general population.  
The guidelines were developed by  
independent scientific organisations  
through periodic and thorough  
evaluation of scientific studies.  
The guidelines include a substantial  
safety margin designed to assure the  
safety of all persons, regardless of age  
and health.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
Check for adequate signal strength.  
2. Press the end key as many times as  
needed to clear the display and  
ready the phone for calls.  
3. Enter the official emergency  
number for your present location.  
Emergency numbers vary by  
location.  
The exposure standard for mobile  
devices employs a unit of  
measurement known as the Specific  
Absorption Rate, or SAR. The SAR limit  
stated in the international guidelines is  
2.0 watts/kilogram (W/kg)*. Tests for  
4. Press the call key.  
If certain features are in use, you may  
first need to turn those features off  
before you can make an emergency  
Download from WwwCo.Spoyrmigahntu©a2ls0.0c6omNo. kAiall.MAlalnriugahltss SreesaerrvcehdA. nd Download.  
89  
     
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
SAR are conducted using standard  
operating positions with the device  
transmitting at its highest certified  
power level in all tested frequency  
national reporting requirements and  
the network band. For SAR information  
in other regions, please look under  
product information at  
bands. Although the SAR is determined www.nokia.com.  
at the highest certified power level, the  
actual SAR of the device while  
Battery information  
operating can be well below the  
maximum value. This is because the  
device is designed to operate at  
multiple power levels so as to use only  
the power required to reach the  
network. In general, the closer you are  
to a base station, the lower the power  
output of the device.  
This section provides information  
about battery charging times with the  
Compact Charger (AC-3), the Travel  
Charger (AC-4), talk-times, and  
standby times. Be aware that the  
information in this section is subject to  
change. For more information, contact  
your service provider.  
The highest SAR value for this device  
when tested for use at the ear is  
0.91 W/kg.  
Charging times  
The following charging times are  
approximate with the BL-6C Li-Ion  
battery:  
SAR values may vary depending on  
national reporting and testing  
requirements and the network band.  
Use of device accessories and  
enhancements may result in different  
Travel Charger (AC-4): up to 1 hour  
45 minutes  
Compact Charger (AC-3): up to 3  
hours 45 minutes  
information may be provided under  
product information at  
www.nokia-asia.com.  
Talk and standby times  
* The SAR limit for mobile devices used  
by the public is 2.0 W/kg averaged over  
10 grams of body tissue. The guidelines  
incorporate a substantial margin of  
safety to give additional protection for  
the public and to account for any  
variations in measurements.  
Operation times are estimates only and  
depend on signal strength, phone use,  
network conditions, features used,  
battery age and condition (including  
charging habits), temperatures to  
which the battery is exposed, and  
many other factors.  
SAR values may vary depending on  
Talk time: 3 to 4 hours (digital)  
Standby time: 6 to 10 days  
Download from WwCowp.ySroigmhta©nu2a0l0s6.cNomok.iaA.lAl lMl raignhutaslsreSseeravercdh. And Download.  
90  
     
Index  
receive, send notes 68  
settings 68  
A
Active profile 44  
Alarm clock  
view 67  
Call  
repeating 65  
divert 63  
setting 65  
tone 65  
duration 31  
settings 48  
Analog service 62  
Answer calls 10  
fold open 48  
Antenna 6  
Anykey answer 48  
Applications  
time 31  
waiting 63  
Caller  
collection 76  
settings 61  
groups 37  
Calling cards 49  
Calls  
Authenticate hologram 84  
Automatic  
answer 10  
keyguard 51  
redial 48  
update of time and date 47  
voice mail 28  
make 9  
mute phone during 11  
options during 11  
restrictions 60  
silence 10  
B
Back cover  
Change lock code 60  
Charger 58, 83  
connect 8  
remove 7  
replace 8  
Backlight time-out 46  
Banner 46  
Battery 7, 90  
times 90  
Clock settings, see time and date  
Conference calls 9  
Confirmation tones 47  
Contacts  
charge 8  
charging times 90  
remove, replace 7  
talk and standby times 90  
Bluetooth connectivity 54  
receive data 56  
set up 55  
add 34  
delete 40  
edit 36  
search 33  
settings 55  
settings 37  
Business cards 35  
view 33  
Countdown timer 73  
Currency converter 72  
Custom profile 44  
C
Calendar 66  
make notes 67  
open 66  
D
options 66  
Data  
Copyright © 2006 Nokia. All rights reserved.  
 
91  
 
call duration 32  
calls 50  
I
Indicators and icons 2  
Internet, see wireless Internet  
Interval timer 74  
transfer 80  
Date settings, see time and date  
Dialled numbers 30  
Dialling codes 34  
Digital service 62  
Display  
settings 45  
Distribution lists 27  
DTMF tones 52  
K
Keyguard  
automatic 51  
lock and unlock 11  
Keypad tones 46  
E
Emergency calls 78, 89  
End calls 10  
L
Language 51  
Lap time 75  
Enhancements 57  
approved 81  
Listen to voice mail 28  
Lock code  
Extras 76  
change 60  
preset 58  
F
Logs  
Fax calls 32, 50  
Feature codes 62  
Fold  
answer calls 48  
Folders, see gallery  
Font colour 45  
clearing 31  
Loudspeaker 10  
M
G
Make calls 9  
Gallery  
Memory  
opening folders 41  
options 42  
Games 76  
Go to functions 5  
organise 5  
checking status 51  
phone 51  
Messages  
minibrowser, see minibrowser  
messages  
multimedia, see multimedia  
messages  
select 5  
H
text, see test messages  
voice, see voice messages  
Minibrowser 77  
call duration 32  
messages 29  
Missed calls 30  
Mobile web 77  
Multimedia messages 20  
create 21, 23  
Handsfree settings 57  
Headset  
connect 8  
settings 57  
Hearing aid 58  
settings 58  
Help  
get x  
in-phone 4  
text activation 4, 52  
delete 25  
folders 21  
Copyright © 2006 Nokia. All rights reserved.  
92  
 
read 22  
R
reply 22  
Restore factory settings 63  
Ring  
send 21  
settings 25  
Mute phone 11  
My phone number, display 39  
volume 46  
N
for no caller ID 51  
Roaming options 61  
Navigation key 51  
Network  
services viii, 62  
settings 61  
S
No caller IDs 51  
Nokia battery authentication  
guidelines 84  
Safety guidelines vii  
battery 90  
Nokia Care Contact Center x  
Nokia PC Suite 80  
Nokia support and contact  
information x  
pacemakers 87  
vehicles 88  
Notes 69  
Screen saver 45  
Scroll method 3  
Security  
make 69  
open 69  
options 70  
settings 58  
send 69  
Set  
alarm 65  
O
date 47  
Organiser 65  
time 47  
Settings 44  
Show call time 51  
Sleep mode 46  
Snooze time-out 66  
Speed dials 39, 48  
Split time 74  
Standby  
P
PC connectivity 80  
Phone  
care and maintenance 86  
details 64  
language 51  
mode 1  
lock 59  
Standby mode  
settings 45  
Standby time 90  
Start-up tone 52  
Stopwatch 74  
memory 51  
set up your 6  
Phone settings 51  
Predictive text 12  
Profiles 44  
T
Q
Talk time 90  
Text entry  
Quick keys 2  
predictive 12  
standard 12  
Text messages  
create 16  
Copyright © 2006 Nokia. All rights reserved.  
 
93  
delete 19  
folders 15  
read 17  
W
Wallpaper 45  
Warning tones 47  
Wireless Internet  
access 77  
reply 17  
send 16  
settings 19  
templates 16  
clear cache 78  
disconnect 78  
Theme 46  
online 78  
Time and date 47  
Timed profiles 44  
Timer  
sign on 77  
countdown 73  
interval 74  
To-do list  
edit 71  
make 70  
open 70  
options 71  
send 71  
view 71  
Tones 46  
DTMF 52  
start-up 52  
TTY/TDD settings 58  
Turn phone on or off 8  
V
Vibrating alert 46  
Voice  
commands 52  
privacy 61  
recorder 43  
Voice messages  
automate 28  
listen 28  
mailbox number 28  
setting up mailbox 28  
Voice tags  
assign 38  
delete 39  
modify 38  
use 38  
Volume 10  
Copyright © 2006 Nokia. All rights reserved.  
94  
 

Nortel Networks Network Router 400 S User Manual
North Star Portable Generator 165959 User Manual
Omega Computer Hardware OME PIO D144 User Manual
Omega Marine Instruments DPG5000 User Manual
Omnimount TV Mount 10040 User Manual
Oregon Scientific Thermometer SL101 User Manual
Palsonic Flat Panel Television TFTV551FHD User Manual
Panasonic Air Compressor DD66C12GBU6 User Manual
Panasonic Camera Accessories CF VZS251A User Manual
Parkside Paint Sprayer PFS 100 B2 User Manual