Universal Remote Control Universal Remote SL 8000 User Manual

Home Theater Master  
Universal Remote Control  
SL-8000  
Operating  
Manual  
 
Introduction  
The Home Theater Master SL-8000 remote control is  
preprogrammed to operate over 1,000 Audio and Video  
components so that you can set it up by simply punching  
in a three digit code number that matches your equipment.  
The Home Theater Master SL-8000 remote control operates  
up to eight different audio and video devices in your home  
entertainment system. They are listed below:  
1
2
3
4
TVs, Monitors, Video/LCD Projectors  
VCRs, TV/VCR combination units  
Cable boxes, Internet set-tops  
Satellite receivers - DSS, Primestar, Dish, DBS,  
C-Band  
5
6
7
8
Audio receivers, Preamplifiers, Surround processors  
Compact disc players, Multi-Disc changers  
DVD, Laser disc players, Cassette decks  
Cassette Tape Players, DAT, MiniDisc, Switchers,  
Lighting, Home Control Devices, and Line Doublers  
Setting up the remote control to work with your equipment  
is simple. The remote control also has many advanced  
features that can add ease and enjoyment to the operation  
of your home entertainment system. Please follow the  
instructions in this manual, and retain the manual for future  
reference.  
For any questions or comments about this remote control,  
please contact Universal Remote Control, Inc., 271 North  
Avenue, New Rochelle, NY 10801, or call (914) 235-2610.  
Service hours are 9:00 AM to 6:00 PM EST, Monday- Friday.  
2
 
Battery Installation  
This remote control uses four AAA 1.5 V batteries. Please  
be sure to match the batteries with the (+) and (–) markings  
inside the battery compartment during installation.  
A:To Open and Close the Battery  
Compartment Cover  
1 To open the battery cover, push the latch forward toward  
the top of the remote control, and lift the latch up.  
2 To close the battery cover, slide the battery cover straight  
back in (toward the top of the remote) and push down  
until it “clicks” into place.  
B: Low Battery Message  
When the Liquid Crystal Display (LCD) flashes L__BAT,  
the batteries should be replaced.  
Note: Batteries should last about 6 months under normal condi-  
tions. The SL-8000 remote control will retain its programmed  
memory for up to one year after the batteries are removed and up  
to ten years after the batteries go “dead”.  
3
 
Using Your Remote  
A: Function Table Reference  
AUD  
SAT  
CD  
TV  
DVD  
VCR  
AUX  
CBL  
1
5
2
6
3
7
4
8
POWER  
MUTE  
12  
13  
14  
15  
9
VOL  
CH  
T/V  
10  
21  
11  
GUIDE  
MENU  
22  
16  
PAUSE  
R
E
W
SEL  
PLAY  
F
.
F
19  
20  
17  
18  
STOP  
PRE.  
CH  
23  
24  
EXIT  
1
4
7
2
5
8
0
3
6
9
FAV  
25  
26  
29  
32  
34  
27  
37  
38  
39  
40  
SLEEP  
INFO  
PRO.L  
28  
31  
35  
30  
33  
36  
NEXT  
3.CH  
+
ALT  
10  
ENTER  
SHIFT  
TEST  
PIP  
41  
42  
43  
48  
44  
45  
50  
TUNER  
CD TAPE1 TAPE2 PHONO  
46  
47  
49  
VCR1 VCR2/SAT LDP  
M1  
M2  
AUX  
M3  
TV  
M4  
51  
52  
53  
54  
LIGHT  
55  
HOME THEATER MASTER  
SL-8000  
4
 
Using Your Remote  
Function Table  
No.  
Button Name  
Audio Functions  
SAT Functions  
TV Functions  
1-8  
9
Device Name  
Power  
AUDIO (ON)  
On/Off (OFF)  
Mute  
SAT (ON)  
On/Off (OFF)  
Mute  
TV (ON)  
On/Off (OFF)  
Mute  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Mute  
T/V Input  
VOL Up  
Band/FM  
Vol Up  
TV/SAT  
Vol Up  
Vol Down  
Ch. Up  
Ch. Down  
Up  
TV/Video  
Vol Up  
VOL Down  
CH Up  
Vol Down  
Preset +  
Vol Down  
Ch. Up  
CH Down  
Up/Pause  
Down/Stop  
Right/F.F.  
Left/Rew  
Sel/Play  
Preset -  
Ch. Down  
Up  
Center +  
Center  
Rear +  
-
Down  
Down  
Right  
Right/Picture  
Left/Audio  
Select/Enter  
Display/Recall  
Menu  
Rear  
-
Left  
Select/Sub.Bass  
Display  
Select  
Guide/I<<  
Menu/>>I  
Exit/Rec  
Guide  
Surround  
Menu  
Delay  
-
Exit/Cancel  
Prev. Ch.  
1—0  
Exit/Clear  
Q. View/Last Ch.  
1—0  
Pre. Ch./Eject  
Delay+  
1—0  
25-34 1—0  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
10+  
Plus 10  
Shift  
100/Ch. Scan  
Ch. Scan  
Enter/Shift  
Fav/Sleep  
Info/Pro. L.  
Next/3 Ch.  
Alt/Test  
Tuner  
Enter  
Sleep  
Fav  
Sleep  
Pro. Logic  
3 Ch.  
Info/Fetch  
Next Prog.  
Alt. Audio  
Caption  
Ant  
Test Tone  
Tuner/AM/FM  
CD  
Reset  
PIP On/Auto Ch.  
PIP Swap, Add  
PIP Freeze/Delete  
PIP Off/Position  
TV/CATV  
Auto  
CD  
Tape 1  
Tape 2  
Phono  
VCR1  
VCR2/SAT  
LD/DVD  
Aux  
Tape 1  
Tape 2  
Phono  
VCR1  
Rec.  
VCR2  
Add  
LD/DVD  
Aux  
Delete  
TV  
TV  
M1  
M2  
M3  
M4  
Light  
5
 
Using Your Remote  
Function Table  
No.  
Button Name  
VCR Functions  
Cable Functions  
1-8  
9
Device Name  
Power  
VCR (ON)  
On/Off (OFF)  
Mute  
CABLE (ON)  
On/Off (OFF)  
Mute  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Mute  
T/V Input  
VOL Up  
VCR/TV  
Vol Up  
Switch/A/B  
Vol Up  
VOL Down  
CH Up  
Vol Down  
Ch Up  
Vol Down  
Ch Up  
CH Down  
Up/Pause  
Down/Stop  
Right/F.F.  
Left/Rew  
Sel/Play  
Ch Down  
Pause  
Ch Down  
Up/Fine +  
Down/Fine -  
Right/Fine R  
Left/Fine L  
Select  
Stop  
Fast Forward  
Rewind  
Play  
Guide/I<<  
Menu/>>I  
Exit/Rec  
F. Adv./Slow<  
X2/Intro/Slow>  
Record  
Guide/Recall  
Menu  
Exit  
Pre. Ch./Eject  
Eject  
Prev. Ch  
1—0  
25-34 1—0  
1—0  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
10+  
1—100  
*/Help  
Enter/Shift  
Fav/Sleep  
Info/Pro. L.  
Next/3 Ch.  
Alt/Test  
Tuner  
Enter  
Enter/Memory  
Fav  
Program  
Display  
C-Counter  
Reset  
Info  
PPV/Buy  
P/Delete  
Page -  
Auto Ch  
Add +  
CD  
Page +  
Tape 1  
Tape 2  
Phono  
VCR1  
VCR2/SAT  
LD/DVD  
Aux  
Delete -  
Tape Speed  
VCR Plus  
Tracking +  
Tracking -  
Auto Tracking  
Slow -  
Day -.  
Day +  
Record  
TV  
Slow +  
M1  
Index  
M2  
QTR On  
QTR Off  
Edit  
M3  
M4  
Light  
6
 
Using Your Remote  
Function Table  
No. Button Name  
CD Functions  
DVD Functions  
AUX Functions  
1-8  
9
Device Name  
Power  
CD (ON)  
On/Off (OFF)  
Mute/Fader  
Random  
DVD (ON)  
TAPE (ON)  
On/Off (OFF)  
On/Off (OFF)  
Mute/Rec Mute  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Mute  
T/V Input  
VOL Up  
Vol Up  
VOL Down  
CH Up  
Vol Down  
Track +/Skip +  
Track-/Skip -  
Pause  
Skip >>I  
Skip I<<  
Pause  
Stop  
CH Down  
Up/Pause  
Down/Stop  
Right/F.F.  
Left/Rew  
Sel/Play  
Pause  
Stop  
Stop  
FF/Search +  
REW/Search -  
Play  
F.F.  
F.F.  
REW  
REW  
Play  
Play  
Guide/I<<  
Menu/>>I  
Exit/Rec  
Search -  
Set Up  
Menu  
Clear  
Deck A  
Deck B  
Record  
Rev. Play  
Search +  
Pre. Ch./Eject  
Eject/Intro  
1—0  
Open/Close  
1—0  
25-34 1—0  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
10+  
Plus 10  
Disc  
10+  
Deck A  
Deck B  
Enter/Shift  
Fav/Sleep  
Info/Pro. L.  
Next/3 Ch.  
Alt/Test  
Tuner  
Enter  
Program  
Display  
Repeat  
Clear  
Return  
Display  
Sub. On/Off  
Audio  
Up  
Disc 1  
Disc 2  
Disc 3  
Disc 4  
Disc 5  
A-B  
REW  
CD  
Down  
Select  
Angle  
Slow  
For. Play  
F.F.  
Tape 1  
Tape 2  
Phono  
VCR1  
VCR2/SAT  
LD/DVD  
Aux  
Stop  
REV. Play  
Pause  
Record  
Left  
Time  
Right  
Intro  
Subtitle  
Repeat  
Random  
A/B Repeat  
T
Edit  
TV  
M1  
M2  
M3  
Title  
M4  
Memory  
Light  
7
 
Using Your Remote  
B: Preprogrammed Set Up  
The Home Theater Master universal remote control can  
operate up to eight separate audio and video devices  
(equipment). To program the remote control for your  
devices, please use the following steps:  
Three Digit Code Method  
1 Turn on the device you would like the remote control to  
operate, either manually or with your original remote  
control.  
2 Find the three digit Set-Up Code number for your  
device from the tables on pages (33~50).  
Example: To set up the remote to operate with a ZENITH  
TV, go to the TV Set-Up Code table found on pages (38 -  
40) and look for ZENITH under the Manufacturer/Brand  
column. You will find that the Set-Up Code numbers for  
ZENITH TVs are 072, 073, 095, 103 and 157.  
3 Press the corresponding Device Button (TV, VCR, SAT,  
CBL, AUD, CD, DVD, or AUX) and the MUTE button  
on the remote control simultaneously. SET will appear  
in the LCD.  
AUD  
SAT  
CD  
TV  
DVD  
VCR  
AUX  
CBL  
Device Buttons  
POWER  
MUTE  
VOL  
CH  
T/V  
Mute Button  
Example: To set-up the remote to operate a TV, press the  
TV Device Button and the Mute button, simultaneously.  
8
 
Using Your Remote  
Note: SET appears in the LCD for 20 seconds to indicate that  
the remote control is ready to be programmed. The following  
steps must be entered while SET appears in the LCD.  
4 Point the remote control toward the device that was  
turned on in Step 1 and press in the first three-digit Set-  
Up Code number for that device using the number buttons  
(0-9) on the remote control. SET followed by the number  
will appear in the LCD.  
Your device will turn off when the correct Set-Up Code  
number has been selected. If the device does not turn  
off, press in the next Set-Up Code number from the listing.  
Continue to select Set-Up Code numbers until your  
device turns off, before you proceed to Step 5.  
Note: If you have tried all of the three digit Set-Up Code  
numbers listed for your device and it still did not turn off, please  
proceed to the Auto Search Method on page (10) to  
program your remote control.  
5 Once your device turns off, press the Device Button  
selected in Step 3 once again to store the Set-Up Code  
number. PASS will flash in the LCD.  
6 Test the remote control for your device. Try the POWER,  
CHANNEL UP AND DOWN, VOLUME UP AND DOWN  
buttons, etc. If any of the buttons do not perform as they  
should, please repeat the set-up from Step 1 using the  
next Set-Up Code number for your device.  
Note: Some audio/video devices have separate buttons for  
POWER ON and POWER OFF. To operate these devices on  
the remote, press the corresponding DEVICE Button to turn the  
equipment ON and press the POWER button to turn the  
equipment OFF.  
7 Please repeat the above steps to program the remote  
control for each of your other devices.  
9