Universal Remote Control Universal Remote M1055 User Manual

Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 1  
ATLAS  
DVR/PVR 5-DEVICE  
Universal Remote Control  
User’s Guide  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 3  
INTRODUCTION  
The Atlas DVR/PVR 5-Device Universal Remote Control  
by Universal Electronics is our latest generation universal  
remote control. Its sophisticated technology allows you to  
consolidate up to five of your original home entertainment  
remote controls into one easy-to-use product. Moreover, it’s  
packed with advanced features such as:  
• Preprogrammed control to operate the cable converter  
supplied by your cable service provider  
• Dedicated keys to control popular functions on your  
DVR/PVR (Digital/Personal Video Recorder)  
• Programmable Master Power key for master on/off  
control of your home entertainment equipment with a  
single keystroke  
• Instant Tune-In” keys for assignment to your  
favorite channels  
• Channel Lock to lock channel selection only to the  
cable converter  
Volume Lock to lock volume controls to one mode or  
individual modes  
• Device Key Re-Assignment to remotely control  
a second (duplicate) device  
• Code Search to help program control of older or  
discontinued components  
• Color-coded keys to quickly locate popular functions  
• Code library for popular video and audio devices  
Before using the product, you will need to install the  
enclosed batteries and also perform some programming  
to operate the specific home entertainment devices you  
wish to control.  
Please follow the instructions detailed in this manual to  
set up the unit and then start enjoying your new remote  
control and cable service.  
3
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 4  
FEATURES AND FUNCTIONS  
Use the illustration below to locate features on the  
Atlas DVR/PVR 5-Device Universal Remote Control and  
then study the Key Charts (on the next three pages) to  
learn how they function.  
To find out what type of devices can be controlled by each  
device key after programming, see the Device Table on  
page 8.  
4
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 5  
Key Charts  
Use SETUP for all programming  
sequences.  
Press PWR once to turn on or  
off a home entertainment device.  
For MASTER POWER control, see  
Using The Master Power Key on  
page 18.  
Press AUX, DVD, AUD, TV, or CBL  
once to select a home entertain-  
ment device to control.Also see  
the Device Table on page 8.  
Each device key has an embedded  
LED (red light) that blinks upon  
selection and indicates the remote  
control is working and (after pro-  
gramming) is sending signals.  
Use GUIDE to display the program  
guide.  
Press SETTINGS once to display  
available interactive services.  
Use INFO to display the current  
channel and program information.  
Use DAY+ (or DAY-) to move a day  
forward (or back) on your cable  
converter’s program guide.  
Use the Cursor keys to move the  
cursor in the program guide and  
menu screens and to navigate  
within the interactive service.  
Use OK/SELECT to choose options,  
PPV events, and to tune programs  
from the program guide.  
Use PAGE+ (or PAGE-) to page up  
(or page down) through menu  
screens and the program guide.  
Use EXIT to exit out of your cable  
converter’s menu and guide.  
Use A, B, or C to access additional  
cable features (see your cable  
converter’s manual).  
continued on next page...  
5
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 6  
FEATURES AND FUNCTIONS  
Key Charts (continued)  
Use VOL+ (or VOL-) to raise (or  
lower) the audio volume.  
Use FAV to cycle through your  
favorite channels stored in your  
cable converter.  
Use CH+ (or CH-) to select the  
next higher (or lower) channel.  
For DVD players, use these keys to  
skip forward (or reverse) through  
chapters.  
For amplifiers/receivers, use these  
keys to select the next higher (or  
lower) preset station.  
Press MUTE once to turn the  
sound off or on.  
Press LAST once to recall the last  
channel.  
Reserved for use asTune-Inkeys  
(see page 16).  
Use to command your PVR to  
instantly replay the last  
7 seconds of a program you are  
watching.  
Press LIST once to display a list  
of recorded shows on your PVR.  
Press LIVE to return to watching  
live TV.  
In all modes except CBL, use REW,  
PLAY, FFWD, STOP, and PAUSE to  
control a VCR, DVD player, or a  
PVR (after selecting a desired  
device). To record in the VCR  
mode, press REC twice.  
In the CBL mode, use above keys  
to control DVR/PVR functions of  
the set-top box.  
6
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 7  
Use the keypad numbers (1~ 9,  
and 0) to directly tune channels  
(e.g., 09). For amplifiers/receivers,  
use the keypad numbers to select  
inputs 1 through 10.  
Press HD/ZOOM once to change  
the aspect ratio of the show you  
are watching. (Not available on all  
set-top boxes).  
Use PIP ON-OFF to switch the  
Picture-In-Picture feature on or  
off (if available on your TV or  
cable service).  
Use PIP SWAP to switch images  
and sound between the main and  
window pictures.  
Use PIP MOVE to move the window  
picture to different positions in the  
main picture.  
Use PIP CH+ (or CH-) to select  
the next higher (or lower) PIP  
channel.  
In the CBL mode, use VIDEO  
SOURCE to view other video  
sources (A or B) instead of cable.  
In all other modes, use VIDEO  
SOURCE to watch TV or video  
programs on a desired device. For  
amplifiers/receivers, use VIDEO  
SOURCE to select an input source.  
7
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 8  
FEATURES AND FUNCTIONS (continued)  
Device Table  
NOTE: Please refer to the table below when performing the  
instructions in “Programming Device Control” on page 10 or  
“Programming TV/ VCR Combo Control” on page 12.  
After programming, the Atlas DVR/PVR 5-Device  
Universal Remote Control will be able to control the  
following types of devices:  
DEVICE KEY  
CONTROLS THESE TYPES OF DEVICES  
VCR, TV/VCR Combo, PVR  
(Personal Video Recorder), or  
extra DVD Player  
DVD Player  
Audio Amplifier, Tuner, or  
Receiver  
Te l e v i s i on  
Cable Box (Converter) or  
Satellite Receiver  
8
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 9  
INSTALLING BATTERIES  
1.  
2.  
On the back of the remote control, push the  
tab and lift off the battery cover.  
Locate the two (2) enclosed AA batteries.  
Match the + and – marks with those in the  
battery case, then insert them.  
3.  
4.  
Align the cover’s keys with the case’s holes  
and press the cover back into place. The tab  
should click when the cover is locked.  
Test the remote control by pressing  
any mode key (e.g., TV). If the batteries are  
inserted correctly, the LED (red light) will  
blink once  
NOTE: When batteries need replacement, the remote control will  
cease to operate. Replace the batteries and the unit will be restored  
to its full functionality, complete with your favorite settings.  
9
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 10  
PROGRAMMING DEVICE CONTROL  
The Atlas DVR/PVR 5-Device Universal Remote Control  
is preprogrammed to operate the Scientific Atlanta cable  
box (converter) provided by your cable system, an RCA  
TV, a Toshiba DVD player, an RCA VCR (as an AUX  
device), and a Pioneer audio receiver. To control devices  
other than the default brands, perform the following steps;  
otherwise skip this section:  
NOTES: For TV/VCR Combo control, skip this section and perform  
the instructions on page 12. Also refer to the “Device Table” on  
page 8 to find out which devices can be programmed onto each  
device key.  
If you have another brand of cable converter or a satellite receiver  
you would like to control, you’ll first need to unlock the cable ID  
Lock before changing the converter code – see “Programming ID  
Lock” on page 16.  
1.  
Turn on a device and, if applicable, insert  
video media, (e.g., cassette or disc).  
NOTE: Please read steps 2 through 4 completely  
before proceeding. Highlight or write down the codes  
and device you wish to program before moving on to  
step 2.  
2.  
3.  
On the remote control, press a device key once  
(i.e.., AUX, DVD, AUD, TV, or CBL); it will blink  
once. Then press and hold SETUP until the  
selected mode key blinks twice, then release  
SETUP.  
Use the Manufacturer’s Codes (starting on  
page 24) to locate the the type of device and  
brand name and then enter the first four-digit  
code for your device. If performed correctly,  
the selected mode key will blink twice.  
NOTE: If the selected mode key emits a long blink,  
the entry is invalid. Repeat steps 2 through 3 and try  
entering the same code again.  
4.  
Aim the remote control at the device and  
press PWR once. The device should turn off.  
If it does not, repeat steps 2 through 3, trying  
each code for your brand until you find one  
that works. If it still does not respond, try  
searching for the code (see Searching For Your  
Code on page 13).  
NOTE: If the device does not have a POWER key,  
press the (Play) key.  
10  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 11  
5.  
Repeat steps 1 through 4 for each device you  
want the remote control to operate. For future  
reference, write down each working device  
code in the following boxes:  
AUX Code  
Device Type:_______________________  
DVD Code  
Device Type:_______________________  
AUD Code  
Device Type:_______________________  
CBL Code  
Device Type:_______________________  
TV Code  
11  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 12  
PROGRAMMING TV/VCR COMBO CONTROL  
If you own a TV/VCR Combo, perform the following  
instructions to control this device:  
1.  
Turn on your TV/VCR Combo and insert a  
video cassette.  
2.  
On the remote control, press AUX once; it will  
blink once. Then press and hold SETUP until  
the AUX key blinks twice, then release SETUP.  
3.  
Use the Setup Codes For TV/VCR Combos (on  
page 36) to locate the brand name and then  
enter the first four-digit code for your TV/VCR  
Combo. If you perform this procedure  
correctly, the AUX key will blink twice.  
NOTE: If the AUX key did not blink twice after  
entering the code’s last digit, then repeat steps 2  
through 3 and try entering the same code again.  
If you’ve located a TV/VCR setup code that  
works for your TV/VCR Combo and a separate  
TV code is also listed, you’ll need to program  
this code into the remote control to access  
volume control (see Programming Device  
Control on page 10).  
4.  
5.  
Aim the remote control at your TV/VCR  
Combo and press PWR once. The device  
should turn off. If it does not respond, repeat  
steps 2 through 3, trying each code listed for  
your brand until you find one that works.  
If it still does not respond, try searching for  
the code (see Searching For Your Code on the  
page 13).  
For future reference, write down each working  
device code in the boxes below:  
TV/VCR Code  
TV Code  
(if used)  
12  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 13  
SEARCHING FOR YOUR CODE  
If your home entertainment device does not respond to  
the Atlas DVR/PVR 5-Device Universal Remote Control  
after trying all of the codes listed for your brand, or if  
your brand is not listed at all, try searching for your code.  
For example, to search for a code for your TV:  
1.  
2.  
Turn on your TV.  
On the remote control, press TV once; it will  
blink once. Then press and hold SETUP until  
the TV key blinks twice, then release SETUP.  
3.  
Enter 9 - 9 - 1. The TV key will blink twice.  
4.  
5.  
Aim the remote control at the TV and press  
PWR once.  
Press CH+ one or more times and stop when  
the TV turns off.  
NOTE: In the search mode, the remote control will  
send IR codes from its library to the selected  
device, starting with the most popular code first.  
6.  
7.  
Press SETUP once to lock in the code. The TV  
key will blink twice.  
To search for the codes of your other devices,  
repeat steps 1 through 5, but substitute the  
appropriate key (e.g., AUX, DVD, AUD, or CBL)  
for the device you are searching for.  
13  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 14  
CHECKING THE CODES  
If you have set up the Atlas DVR/PVR 5-Device Universal  
Remote Control using the Searching For Your Code  
procedure (on the previous page), you may need to find  
out which four-digit code is operating your equipment.  
For example, to find out which code is operating your TV:  
1.  
On the remote control, press TV once; it will  
blink once. Then press and hold SETUP until  
the TV key blinks twice, then release SETUP.  
2.  
3.  
Enter 9 - 9 - 0. The TV key will blink twice.  
To view the code for the first digit, press 1  
once.Wait 3 seconds and count the number  
of times the TV key blinks (e.g., 3 blinks = 3)  
and write down the number in the leftmost  
TV Code box on page 11.  
NOTE: If a code digit is “0”, the selected mode key  
will not blink.  
4.  
5.  
Repeat step 3 three more times for the  
remaining digits. Use 2 for the second digit,  
3 for the third digit, and 4 for the fourth digit.  
Finish writing down the code in the TV Code  
boxes on page 11.  
To check for other device codes, repeat steps  
1 through 4, but substitute the appropriate key  
(e.g., AUX, DVD, AUD, or CBL) for the device  
you are checking.Write down the codes in the  
appropriate boxes on page 11.  
14  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 15  
PROGRAMMING CHANNEL CONTROL LOCK  
By default, the remote control’s channel-control capabilities  
are locked to the cable converter. The affected keys* are  
0~9, CH+, CH-, ENTER, and LAST. This will guarantee that  
you do not inadvertently change a channel on your TV or  
VCR. However, you can de-activate this feature to allow full  
access to these keys in the TV and VCR modes.  
*NOTE: This feature does not affect the AUD mode.  
To De-Activate Channel Control Lock:  
1.  
2.  
On the remote control, press CBL once; it will  
blink once. Then press and hold SETUP until  
the CBL key blinks twice, then release SETUP.  
Enter 9 -7- 3. The CBL key will blink twice.  
3.  
4.  
Press CH- once. The CBL key will blink  
four times.  
Now, the remote control will provide TV and  
VCR channel-control capabilities while in the  
TV or VCR mode.  
To Re-Activate Channel Control Lock:  
1.  
On the remote control, press CBL once; it will  
blink once. Then press and hold SETUP until  
the CBL key blinks twice, then release SETUP.  
2.  
Enter 9 -7- 3. The CBL key will blink twice.  
3.  
4.  
Press CH+ once. The CBL key will blink twice.  
Now, regardless of what mode you select  
(except AUD), only the channel control  
capability of your cable converter will be  
accessible.  
15  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 16  
PROGRAMMING ID LOCK  
The Atlas DVR/PVR 5-Device Universal Remote Control  
is locked at the factory to operate a Scientific Atlanta  
cable converter. However, if you have another brand or  
model of cable converter or satellite service that you  
would like to control, then you’ll need to perform the fol-  
lowing steps to unlock the ID Lock, enter in a new manu-  
facturer’s code, and lock the ID Lock again.  
1.  
2.  
Turn on the cable converter.  
On the remote control, press CBL once; it will  
blink once. Then press and hold SETUP until  
the CBL key blinks twice, then release SETUP.  
3.  
4.  
Enter 9 - 8 - 2. The CBL key will blink  
four times, indicating ID Lock is unlocked.  
Perform the instructions in Programming  
Device Control on page 10 to program device  
control for the desired cable converter or  
satellite receiver. Upon completion, perform  
the remaining steps (5 and 6 on this page) to  
again lock the ID Lock.  
5.  
6.  
On the remote control, press CBL once; it will  
blink once. Then press and hold SETUP until  
the CBL key blinks twice, then release SETUP.  
Enter 9 - 8 - 2. The CBL key will blink twice,  
indicating ID Lock is again locked.  
PROGRAMMING “TUNE-IN” KEYS  
FOR SPECIFIC CHANNELS  
The Atlas DVR/PVR 5-Device Universal Remote Control  
includes three “Tune-In” keys (located directly below the  
MUTE and LAST keys). Each can be programmed to  
remember five of your favorite cable channel settings for  
a total of nine channels. If you want to change the cable  
channels in a previously-programmed “Tune-Inkey,  
you’ll need to clear the key first (see next page).  
16  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 17  
To Program A “Tune-In” Key:  
1.  
2.  
3.  
On the remote control, press CBL once; it will  
blink once. Then press and hold SETUP until  
the CBL key blinks twice, then release SETUP.  
Enter 9 - 9 - 5. The CBL key will blink  
twice. Then select a “Tune-Inkey and press  
it once.  
Press CBL once followed by the channel  
number to be programmed (e.g., 3 - 9).  
NOTE: If you are programming a channel for a  
Digital Cable Converter, you need to enter all  
channels in a 3-digit channel format. For example,  
if the desired channel is 39, then enter it as 0 - 3 - 9.  
4.  
5.  
Press and hold SETUP until the CBL key blinks  
twice, then release SETUP.  
To add another channel, repeat steps 1  
through 4, substituting the new channel to be  
added in step 3.  
NOTE: Programming more than five channels on the  
same “Tune-Inkey will overwrite previous settings.  
To Clear A “Tune-In” Key:  
1.  
On the remote control, press CBL once; it will  
blink once. Then press and hold SETUP until  
the CBL key blinks twice, then release SETUP.  
2.  
Enter 9 - 9 - 5. The CBL key will blink  
twice. Then select a “Tune-Inkey you want to  
clear and press it once.  
3.  
4.  
Press and hold SETUP until the CBL key blinks  
twice, then release SETUP.  
This “Tune-In” key is now clear and ready for  
reprogramming (see above – To P rog ram A  
Tune-In” Key). If desired, repeat steps 1  
though 3 in this section to clear another  
Tune-Inkey.  
17  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 18  
USING THE MASTER POWER KEY  
The Atlas DVR/PVR 5-Device Universal Remote Control  
has a unique feature that allows you to sequentially turn  
on or off up to five of your home entertainment devices  
with a single key press.  
NOTE: MASTER POWER (PWR) only works in the CBL mode. If it  
is not programmed, only the cable converter will turn on or off.  
In any other mode, pressing MASTER POWER (PWR) once will  
turn on or off the selected device.  
To Program The Master Power Key:  
1.  
On the remote control, press and hold SETUP  
until the last-selected device key blinks twice,  
then release SETUP.  
2.  
Enter 9 - 9 - 5. The last-selected device key  
will blink twice. Then press PWR once.  
3.  
For the first device you want in the power on  
sequence, press a device key (e.g., CBL) once .  
Then press PWR once.  
4.  
5.  
Repeat step 3 up to four more times to add the  
second, third, fourth, and fifth device, as desired.  
To save the settings and exit the program, press  
and hold CBL once. Next press and hold  
SETUP until the CBL key blinks twice, then  
release SETUP.  
To Operate The Master Power Key:  
1.  
After programming, point the remote control  
at the devices. Press CBL once.  
2.  
3.  
Press PWR once to sequentially turn on or off  
all home entertainment devices.  
You will see the devices turn on or off  
according to the programmed sequence.  
18  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 19  
To Clear The Master Power Key:  
1.  
Perform steps 1 and 2 in the first section  
above, To Program The Master Power Key.  
2.  
To clear the settings and exit the program,  
press and hold SETUP until the CBL key blinks  
twice, then release SETUP.  
RE-ASSIGNING DEVICE KEYS  
The Atlas DVR/PVR 5-Device Universal Remote Control  
can be set up to control a second device. For example,  
to have the unit control a TV, a Cable Converter, and two  
DVD Players, you will need to re-assign the unused AUX  
key to operate the second DVD Player as follows:  
NOTE: AUX is preset at the factory to control an RCA VCR.  
Performing the below steps will overwrite those settings.  
1.  
On the remote control, press AUX once; it will  
blink once. Then press and hold SETUP until  
the AUX key blinks twice, then release SETUP.  
2.  
3.  
4.  
Enter 9 - 9 - 2. The AUX key will blink twice.  
Press DVD once, then press AUX once. The  
AUX key will blink twice.  
The AUX key is now ready to be programmed  
for your second DVD player. See Programming  
Device Control on page 10.  
To re-assign other device keys, repeat steps 1 to 4 and  
substitute the key sequence using the following chart:  
NOTE: Only one device can be assigned to an unused device key  
at a time.  
continued on next page...  
19  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 20  
RE-ASSIGNING DEVICE KEYS (continued)  
To Re-Assign  
Perform Key Sequence  
AUX as 2nd AUD key: AUX - SETUP - 9 - 9 - 2 - AUD - AUX  
AUX as 2nd TV key: AUX - SETUP - 9 - 9 - 2 - TV - AUX  
AUX as 2nd CBL key: AUX - SETUP - 9 - 9 - 2 - CBL - AUX  
AUX back to AUX:  
AUX - SETUP - 9 - 9 - 2 - AUX - AUX  
To re-assign another unused device key, substitute it for  
the AUX key above and then perform the sequence. For  
example, to re-assign an unused AUD key as a second DVD  
key, perform AUD - SETUP - 9 - 9 - 2 - DVD - AUD.  
When a re-assignment is done, the selected device key  
(e.g., AUD) will blink twice to confirm your choice.At that  
time, you will need to program device control (see  
Programming Device Control on page 10).  
CHANGING VOLUME LOCK  
On this remote control, Global Volume Lock is set to TV, so  
you can control TV volume while in the AUX, DVD, TV or  
CBL mode. If desired, you can still perform Individual  
Volume Unlo ck on a selected device to set its volume con-  
trol for independent operation.  
NOTE: The audio mode’s volume controls are active regardless of  
Volume Lock settings. However, if you lock the volume controls to  
the AUD mode, you will have control of the audio device’s volume  
in all other modes (i.e., AUX, DVD, TV, and CBL).  
To Unlock Volume Control For A Single Device  
(Individual Volume Unlock):  
1.  
Assuming Global Volume Lock is active, select  
a mode on the remote control that you want to  
unlock (e.g.,CBL) and press it once. Next,  
press and hold SETUP until the device key  
blinks twice, then release SETUP.  
2.  
3.  
Enter 9 - 9 - 3. The last-selected device key  
will blink twice.  
Press VOL- once. The last-selected device key  
will blink four times.  
20  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 21  
4.  
5.  
Repeat steps 1 through 3 (of this section) for  
each device you want volume to be unlocked.  
Now, after you select a device that has volume  
unlocked (e.g., CBL), pressing VOL+, VOL-, or  
MUTE, will control the device’s volume only in  
its own mode.  
To Unlock All Volume Control  
(Global Volume Unlock):  
NOTE: Performing these instructions will set independent volume  
control for all programmed devices.  
1.  
2.  
On the remote control, press and hold SETUP  
until the last-selected device key blinks twice,  
then release SETUP.  
Enter 9 - 9 - 3. The last-selected device key  
will blink twice.  
3.  
Press VOL+ once. The last-selected device key  
will blink four times.  
To Lock Volume Control To One Mode  
(Global Volume Lock):  
NOTE: The audio mode’s volume controls are active regardless of  
Volume Lock settings. However, if you lock the volume controls to  
the AUD mode, you will have control of the audio device’s volume  
in all other modes (i.e., AUX, DVD, TV, and CBL).  
1.  
On the remote control, press and hold SETUP  
until the last-selected device key blinks twice,  
then release SETUP.  
2.  
Enter 9 - 9 - 3. The last-selected device key  
will blink twice.  
3.  
4.  
Select a mode (e.g., TV) where you want to  
globally lock the volume controls. The selected  
device key will blink twice.  
Now, when you press VOL+, VOL-, or MUTE,  
the volume of the selected device (e.g., TV)  
can be controlled regardless of mode.  
21  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 22  
TROUBLESHOOTING  
PROBLEM: Device key does not blink when you press a key.  
SOLUTION: Replace the batteries with two (2) new AA  
alkaline batteries (see page 9).  
PROBLEM: Device key blinks when you press a key, but home  
entertainment device does not respond.  
SOLUTION: Make sure you are aiming the remote control at  
your home entertainment device and that you  
are within 15 feet of the device you are trying  
to control.  
PROBLEM: The remote control does not control home  
entertainment devices or commands are not  
performing properly.  
SOLUTION: Try all listed codes for the device brand being set  
up. Make sure all devices can be operated with  
an infrared remote control.  
PROBLEM: TV/VCR Combo does not respond properly.  
SOLUTION: Use the VCR codes for your brand. Some combo  
units may require both a TV code and a VCR  
code for full operation (see page 12).  
PROBLEM: No volume on a second TV.  
SOLUTION: Follow instructions in Changing Volume Lock  
(see page 20).  
PROBLEM: PLAY and STOP keys do not work on a Motorola  
DCT-2000 cable converter.  
SOLUTION: Re-program the CBL key for cable code 0476  
(see page 10, Programming Device Control)  
PROBLEM: Tried “Search Method” and still could not find a  
working code.  
SOLUTION: Try the “Search Method” again after clearing out  
the device key as follows: Press and hold SETUP  
until device key blinks twice, then release. Next  
enter 9 - 9 - 2. Then press and release the device  
key to be cleared twice.  
PROBLEM: Remote control does not turn on Sony or Sharp  
TV/VCR Combo.  
SOLUTION: For power on, these products require program-  
ming TV codes on the remote control. For Sony,  
use TV code 0000 and VCR code 0032. For Sharp,  
use TV code 0093 and VCR code 0048.  
22  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 23  
INSTRUCTIONS TO THE USER  
This equipment has been tested and found to comply  
with the limits for a class B digital device, pursuant to part  
15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses  
and can radiate radio frequency energy and if not  
installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the inter-  
ference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment  
and receiver.  
• Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV  
technician for help.  
This equipment has been verified to comply with the  
limits for a class B computing device, pursuant to FCC  
Rules. In order to maintain compliance with FCC  
regulations, shielded cables must be used with this  
equipment. Operation with non-approved equipment or  
unshielded cables is likely to result in interference to  
radio and TV reception. The user is cautioned that  
changes and modifications made to the equipment  
without the approval of manufacturer could void the  
user's authority to operate this equipment.  
23  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 24  
ADDITIONAL INFORMATION  
This product does not have any user-serviceable parts.  
Opening the case, except for the battery cover, may cause  
permanent damage to your Atlas DVR/PVR 5-Device  
Universal Remote Control.  
For help via the Internet, visit us at:  
For help via e-mail, contact us at:  
Copyright 2004 by Universal Electronics Inc. No part of this  
publication may be reproduced, transmitted, transcribed,  
stored in any retrieval system, or translated to any language,  
in any form or by any means, electronic, mechanical, mag-  
netic, optical, manual, or otherwise, without prior written  
permission of Universal Electronics Inc.  
M1055  
08/04  
MANUFACTURER’S CODES  
Setup Codes For Audio Amplifiers:  
Accuphase  
0382  
Acurus  
0765  
Adcom  
1100, 0577  
0406  
Aiwa  
AudioSource  
Biamp  
0011  
0582  
Bose  
0674  
Carver  
0269  
Classe  
1461, 1462  
0300  
Curtis Mathes  
Denon  
0160  
Digital Audio Control  
Durabrand  
Elan  
0085  
1561  
0647  
Forte  
0606  
GE  
0078  
GoldStar  
Harman/Kardon  
JVC  
0031  
0892, 0106  
0331  
Kenwood  
Left Coast  
Lenoxx  
0356  
0892  
1561  
Linn  
0269  
Logitech  
Luxman  
1408  
0165  
24  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 25  
Magnavox  
Marantz  
Mark Levinson  
McIntosh  
Nakamichi  
NEC  
0269  
0892, 0321, 0269  
1483  
0251  
0321  
0264  
Optimus  
Panasonic  
Parasound  
Philips  
0395, 0300  
0308, 0521  
0246  
0892, 0269  
0300, 0013  
0892, 0269  
0300  
Pioneer  
Polk Audio  
RCA  
Realistic  
Sansui  
0395  
0321  
Shure  
0264  
Sony  
0689, 0220, 0815  
0078, 0211  
0521, 0308  
0331  
Soundesign  
Technics  
Victor  
Wards  
0078, 0013, 0211  
0354, 0143, 0133, 0504  
Yamaha  
Setup Codes For Audio Receivers:  
ADC  
0531  
Adcom  
0616  
Aiwa  
1405, 0158, 0189, 0121, 0405, 1388, 1243, 1641  
Akai  
1255, 0224, 0076, 1512  
Alco  
1390  
Amphion Media Works  
AMW  
1563  
1563  
Anam  
1609, 1074  
1430, 1257  
1120  
Apex Digital  
Arcam  
Audiotronic  
Audiovox  
Bose  
1189  
1390  
1229, 0639, 1253  
Cambridge Soundworks 1370  
Capetronic  
Carver  
0531  
1189, 0189, 0042, 0008, 0360  
Casio  
0195  
Clarinette  
Classic  
0195  
1352  
Coby  
1263, 1389  
Compaq  
Criterion  
Curtis Mathes  
Daewoo  
Dell  
1136  
1420  
0080  
1250  
1383  
Denon  
1360, 0004, 1142, 0771, 0273  
continued on next page...  
25  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 26  
MANUFACTURER’S CODES  
Setup Codes For Audio Receivers (continued):  
Emerson  
0424  
Fisher  
0042, 1801, 0360, 0219  
0463, 0424  
1517  
Garrard  
Gateway  
Glory Horse  
Go Video  
Harman/Kardon  
Hewlett Packard  
Hitachi  
1263  
1532  
0110, 0189, 0891  
1181  
1273, 1801  
1426  
Initial  
Inkel  
0062  
Integra  
1298, 0135  
0110, 1306  
0074, 1263, 1495, 1374  
JBL  
JVC  
Kenwood  
1313, 1570, 1569, 0027, 0042, 0239, 0569, 0186, 0314,  
1052, 0077, 0313, 1051  
KLH  
1390, 1428, 1412  
Koss  
1366, 0424  
Lasonic  
Lenoxx  
Lexicon  
Linn  
1798  
1437  
1076  
0189  
Liquid Video  
Lloyd’s  
LXI  
1497  
0195  
0181  
Magnavox  
Marantz  
MCS  
1189, 1269, 0189, 0531, 1514, 0128, 0391, 0195  
1189, 1269, 0039, 0189, 1289, 0128  
0039, 0346  
Mitsubishi  
Modulaire  
NAD  
1393  
0195  
0320  
Nakamichi  
NEC  
0347, 0097, 1555  
0235  
Norcent  
Onkyo  
1389  
0135, 1298, 0842, 0380, 1531  
Optimus  
1023, 1074, 0080, 0186, 0670, 0042, 0181, 0531, 0801,  
0177, 0219, 0738  
Oritron  
1497, 1366  
Panasonic  
1518, 0039, 0518, 1764, 0367, 1316, 1763, 0309, 1288,  
1548  
Penney  
0195  
Philco  
1390  
Philips  
1189, 1269, 0189, 0391, 1266, 1120  
Pioneer  
Polaroid  
Polk Audio  
Proscan  
Quasar  
1023, 0080, 0531, 1384, 0014, 0244, 0150, 0630  
1508  
0189, 1289  
1254  
0039  
RadioShack  
1263  
26  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 27  
RCA  
1023, 1609, 1254, 0054, 0360, 0346, 0531, 1154, 1511,  
0080, 0530, 1074, 1390  
Realistic  
Regent  
0163, 0195, 0181  
1437  
Rio  
1869, 1383  
Saba  
1519  
Samsung  
Sansui  
1500, 1295  
0189, 0346, 0193  
0219, 1469, 1251, 0801  
0163, 0322  
Sanyo  
Scott  
Sharp  
1286, 0186  
Sharper Image  
Sherwood  
Shinsonic  
Sonic Blue  
Sony  
1556, 1263  
0062, 1077, 0502, 1653, 0491, 1423  
1426  
1869, 1532, 1383  
1058, 1441, 1258, 1759, 0158, 1042, 1349, 1442, 1758,  
0474, 1658, 1858, 0168, 1406, 1558  
Soundesign  
Stereophonics  
Sunfire  
Teac  
0670  
1023  
1313, 1052, 0314, 0313  
0463, 1390, 0163, 1267, 1074, 1528  
Technics  
Thorens  
Venturer  
Victor  
1308, 1518, 0039, 0208, 0518, 0309  
1189  
1390  
0074  
Wards  
0158, 0189, 0080, 0054, 0014  
0176, 1331, 1176, 0186, 1375  
0195  
Yamaha  
Yorx  
Zenith  
1293, 0857, 1869  
Setup Codes For Cable Boxes (Converters):  
ABC  
0003, 0008, 0014, 0017  
Americast  
Bell & Howell  
Bell South  
Clearmaster  
ClearMax  
Coolmax  
Digi  
0899  
0014  
0899  
0883  
0883  
0883  
0637  
Director  
0476  
Dumont  
0637  
General Instrument  
GoldStar  
Hamlin  
0476, 0810, 0276, 0003  
0144  
0009, 0273  
Jerrold  
0476, 0810, 0276, 0003, 0012, 0014  
Memorex  
Motorola  
MultiVision  
Pace  
0000  
0476, 0810, 0276, 1254, 1106, 1376  
0012  
1877, 0237  
0000, 0107  
Panasonic  
continued on next page...  
27  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 28  
MANUFACTURER’S CODES  
Setup Codes For Cable Boxes (continued):  
Panther  
Paragon  
Philips  
0637  
0000  
0305, 0317  
Pioneer  
Pulsar  
1877, 0877, 0144, 0533  
0000  
Quasar  
0000  
RadioShack  
Regal  
0883  
0279, 0273  
Runco  
0000  
Samsung  
Scientific Atlanta  
Sony  
0144  
1877, 0877, 0477, 0008, 0017  
1006  
Starcom  
Supercable  
Supermax  
Tocom  
0003  
0276  
0883  
0012  
Torx  
0003  
Toshiba  
Tristar  
0000  
0883  
V2  
0883  
Viewmaster  
Vision  
0883  
0883  
Vortex View  
Zenith  
0883  
0000, 0525, 0899  
Setup Codes For DVD Players:  
Adcom  
1094  
Advent  
1016  
Aiwa  
0641, 1912  
0899, 0770, 1975, 1089  
0869  
Akai  
Allegro  
Amphion Media Works  
AMW  
2016, 2001  
0872, 2016, 2001  
1913  
Anam  
Apex Digital  
0672, 0717, 0830, 1056, 1915, 0755, 0797, 1020, 1100,  
0796, 1004, 1061, 1937, 0794  
Audiologic  
Audiovox  
Axion  
0736  
1041, 1121, 1072, 1071, 1122  
1072, 1071  
0655, 0662  
0717  
B & K  
Blaupunkt  
Blue Parade  
Broksonic  
0571  
0868, 0695  
Cambridge Soundworks 1916  
CAVS  
1057  
CineVision  
Classic  
0876, 0869  
1917  
28  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 29  
Coby  
1086, 0778, 1923, 1107  
Criterion  
Curtis Mathes  
CyberHome  
Daewoo  
Denon  
2007  
1087  
1024, 1023, 0816, 1117  
0784, 1918, 0705, 0869, 0833  
0490, 0634  
Dual  
1068, 1085  
DVD2000  
Emerson  
Enterprise  
Fisher  
0521  
0591, 0675, 0821  
0591  
0670, 1919  
Funai  
0675  
Gateway  
GE  
1073, 1077  
0522, 0815, 0717  
Go Video  
GPX  
0744, 1044, 1970, 0869, 1099, 0715, 0833, 1075, 0783  
0769, 0699  
Greenhill  
Harman/Kardon  
Hitachi  
Hiteker  
Initial  
0717  
0702, 0582  
0573, 0664, 1919  
0672  
0717, 1931  
Integra  
Jamo  
0627, 1924  
2003  
Jaton  
1078  
JBL  
0702, 1926  
Jensen  
1016  
JVC  
0558, 0623, 1901, 0867, 1940  
jWin  
1051, 1049  
Kenwood  
KLH  
0490, 0534, 0737, 0682  
0717, 1939, 1020  
Konka  
0720, 0719, 0711, 0721  
Koss  
0651  
Landel  
Lasonic  
Lenoxx  
LG  
0826  
0798  
1938  
0801  
Liquid Video  
Lite-On  
Loewe  
1980  
1058  
0511  
Magnavox  
Malata  
0503, 1914, 0821, 0675, 1976  
0782  
Marantz  
Memorex  
Microsoft  
Mintek  
Mitsubishi  
Momitsu  
NEC  
0539  
0695  
0522  
0839, 0717  
1521, 0521  
1082  
0785  
Nesa  
0717  
Next Base  
Norcent  
0826  
1003, 1107, 0872, 1923  
continued on next page...  
29  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 30  
MANUFACTURER’S CODES  
Setup Codes For DVD Players (continued):  
Onkyo  
0503, 0627, 1985, 1924, 0792  
Oritron  
Panasonic  
0651, 1980  
0490, 1490, 1908, 1925, 2017, 1462, 1907, 1910, 1990,  
1362, 1762, 1909, 1986, 0632  
Philco  
2000  
Philips  
0503, 0539, 0646, 1914, 0885, 0854  
Pioneer  
Polaroid  
Polk Audio  
Portland  
Prima  
0525, 0571, 0632, 1902  
1086, 1061, 1998  
0539  
0770  
1016  
Princeton  
Proscan  
ProVision  
Qwestar  
RCA  
0674  
0522  
0778  
0651  
0522, 0571, 0717, 1022, 1974, 0822, 1965, 1913  
Regent  
1938  
Rio  
0869  
Rotel  
0623  
Rowa  
0823  
Saba  
1977  
Sampo  
0698, 0752  
Samsung  
Sansui  
0490, 0573, 0820, 1932, 1075, 0899, 1979  
0695  
Sanyo  
0670, 1967, 0873, 0695  
Sharp  
0630, 0752  
Sharper Image  
Sherwood  
Shinsonic  
Sigma Designs  
Sonic Blue  
Sony  
1117, 1995  
1043, 0770, 0633, 1077  
0533, 0839, 1931  
0674  
0869, 1970, 1099  
0533, 1533, 0864, 1981, 1934, 1033, 1904, 2020, 1903  
Sungale  
Superscan  
SVA  
1074  
0821  
1105, 0860  
Sylvania  
Symphonic  
Teac  
0675, 0821  
0675  
0809, 1984  
Technics  
Techwood  
Terapin  
Theta Digital  
Tivo  
0490  
0692  
1031  
0571  
1996  
Toshiba  
Tredex  
0503, 1988, 1045, 2006, 0695, 1996  
0799, 0804, 0803, 0800  
TYT  
0705  
0503  
0839  
Urban Concepts  
US Logic  
30  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 31  
V Inc.  
1064  
Vocopro  
Xbox  
1027  
0522  
Xwave  
Yamaha  
Zenith  
1001  
0490, 0539, 0545  
0503, 0591, 0869, 2002, 1906  
Setup Codes For PVRs:  
ABS  
1972  
Alienware  
CyberPower  
Dell  
1972  
1972  
1972  
Gateway  
1972  
Hauppauge  
Hewlett Packard  
Howard Computers  
HP  
1992  
1972  
1972  
1972  
iBUYPOWER  
Media Center PC  
Microsoft  
Mind  
1972  
1972  
1972  
1972  
Northgate  
Panasonic  
Philips  
1972  
0616  
0739, 0618  
0616, 0614  
0614, 0616  
1972, 0636  
1972  
ReplayTV  
Sonic Blue  
Sony  
Systemax  
Tagar Systems  
Tivo  
1972  
0618, 0739, 0636  
1972  
Toshiba  
Touch  
1972  
Viewsonic  
ZT Group  
1972  
1972  
Setup Codes For Satellite Receivers:  
General Instrument  
0869  
0869  
0869  
0724  
0099  
0869  
0869  
0180  
0869  
Motorola  
Next Level  
Paysat  
Philips  
RadioShack  
Star Choice  
Star Trak  
Voom  
31  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 32  
MANUFACTURER’S CODES (continued)  
Setup Codes For TVs:  
A-Mark  
0003  
Abex  
0032  
Admiral  
Advent  
0093, 0463  
0761, 0783, 0842, 0817, 0815, 1933  
Adventura  
Aiko  
0046  
0092  
Aiwa  
1914  
Akai  
0812, 0702, 0030, 0672, 1903  
Alaron  
0179  
Albatron  
Ambassador  
America Action  
Ampro  
0843, 0700  
0177  
0180  
0751  
Anam  
0180  
Anam National  
AOC  
0055  
0030, 0019, 0185, 0003, 0052  
0748, 0765, 0879, 0767, 1943  
0003  
Apex Digital  
Archer  
Audiovox  
0451, 0180, 0003, 0875, 1952, 0802, 1951, 0092, 0623,  
1937  
Axion  
1937  
Belcor  
0019  
Bell & Howell  
Bradford  
Brockwood  
Broksonic  
Candle  
0154, 0016  
0180  
0019  
0236, 0463, 0003, 1905, 1935, 1929, 1911, 1938  
0030, 0056, 0046, 0186  
Carnivale  
Carver  
0030  
0054  
CCE  
0217  
Celebrity  
Celera  
0000  
0765  
Changhong  
Citizen  
0765  
0060, 0030, 1928, 0039, 0280, 0056, 0186, 0046, 0092  
Clairtone  
Clarion  
0185  
0180  
Colt  
1906  
Concerto  
Contec  
0056  
0180, 0157, 0185  
0180  
Craig  
Crosley  
0054  
Crown  
0180, 0039  
Curtis Mathes  
0047, 0054, 0154, 0451, 0093, 0060, 0702, 0030, 0145,  
0166, 0016, 1919, 0466, 1347, 0039, 0056, 1147  
CXC  
0180  
Daewoo  
Daytron  
Denon  
Dumont  
0451, 1661, 0092, 0672, 1928, 0039, 0623, 1909, 0019  
0019  
0145, 0511  
0017, 0019  
32  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 33  
Durabrand  
Dwin  
0463, 0180, 0178, 0171, 0003  
0774, 0720  
Electroband  
Electrohome  
Elektra  
0000, 0185  
0381  
0017, 1661  
Emerson  
0154, 0236, 0463, 0180, 0178, 0171, 1909, 0038, 1929,  
0185, 0282, 1905, 0019, 1928, 0280, 0623, 1911, 0039,  
1944, 0177, 0179  
Envision  
Epson  
0030, 0813  
0840, 0833  
Fisher  
0154, 0159  
Fujitsu  
Funai  
0809, 0683, 0179, 0853  
0180, 0171, 0179, 1904  
0180  
Futuretech  
Gateway  
GE  
1756, 1755  
0047, 0051, 0451, 0178, 1447, 0055, 0282, 1347, 1917,  
0021, 1147, 1907, 1922, 0135, 1919, 0027  
Gibralter  
GoldStar  
Goodmans  
Grunpy  
Haier  
0017, 0030, 0019  
0030, 0178, 0019, 0001, 0032, 1926  
0360  
0180, 0179  
0768  
Hallmark  
Harley Davidson  
Harman/Kardon  
Harvard  
Havermy  
Hello Kitty  
Himitsu  
Hisense  
Hitachi  
Hyundai  
Infinity  
Inteq  
0178  
1904, 0179  
0054  
0180  
0093  
0451  
0180, 0628  
0748  
1145, 0145, 0016, 0056, 0038, 0151, 0032, 1904  
0849  
0054  
0017  
Janeil  
0046  
JBL  
0054  
JCB  
0000  
Jensen  
0761, 0817, 0815, 1933  
JVC  
0053, 1253, 1923  
Kaypani  
KEC  
0052  
0180  
Kenwood  
KLH  
0030, 0019  
0765, 0767  
Kloss  
0046, 0024  
Konka  
0628, 0703, 1940, 0638, 1939, 0632, 0707  
KTV  
0180, 0030, 0280, 0039, 0217, 0185  
LG  
1178, 0856, 0442  
Lloyd’s  
Loewe  
1904  
0136  
Logik  
0016  
Luxman  
LXI  
0056  
0047, 0054, 0154, 0156, 0178  
continued on next page...  
33  
 
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 34  
MANUFACTURER’S CODES  
Setup Codes For TVs (continued):  
Magnasonic  
1913, 1928  
Magnavox  
0054, 0030, 1454, 0706, 0179, 0386, 1931, 0024, 0096,  
0187, 1254, 1913, 0020, 0186, 1904, 1944  
Magnin  
1907  
Majestic  
Marantz  
Matsushita  
Megapower  
Megatron  
MEI  
0016  
0054, 0030, 0854, 0704, 1154, 0855  
0250, 0650  
0700  
0178, 0145, 0003  
0185  
Memorex  
0154, 0463, 0150, 0178, 1911, 1926, 1924, 0179, 1920,  
1927, 0016  
MGA  
0150, 0030, 0178, 1907, 0019  
Midland  
Minutz  
Mitsubishi  
Monivision  
Motorola  
MTC  
0047, 0017, 0051, 0039, 0135, 0032  
0021  
0093, 0150, 1250, 0178, 0868, 0836, 1917, 0019  
0700, 0843  
0093, 0055  
0060, 0030, 0056, 0185, 0019  
Multitech  
NAD  
0180, 0217  
0156, 0178, 0866  
NEC  
0030, 0056, 1704, 0019, 0497  
Nikko  
0030, 0178, 0092  
Norcent  
Noshi  
0748, 0824  
0018  
NTC  
0092  
Onwa  
0180  
Optimus  
Optonica  
Orion  
0154, 0250, 0166, 1924, 1913, 0650, 1927  
0093, 0165  
0236, 0463, 1905, 1929, 1911, 0179  
Panasonic  
0250, 0051, 0650, 1924, 1946, 1919, 1941, 0055, 1410,  
1927, 1947  
Penney  
0047, 0156, 0051, 0060, 0030, 0178, 0019, 0135, 1347,  
0018, 1926, 0027, 0039, 0003, 1919, 0021, 0032, 1907  
Philco